Panasonic VW-PT2 Manual de usuario

Operating Instructions

SD Media Storage

Model No. VW-PT2

Before connecting, operating or adjusting this product, please read the

instructions completely.

VQT1B03

For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at:

http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

VQT1B03_Eng.book 1 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

Dear Customer,

We would like to take this opportunity to thank you for purchasing this Panasonic SD

Media Storage. Please read these Operating Instructions carefully and keep them handy

for future reference.

¬Information for your safety

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE APPARATUS.

≥USE ONLY THE RECOMMENDED ACCESSORIES.

≥DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND

SHALL BE EASILY ACCESSIBLE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Battery

Battery pack (Lithium ion battery pack)

≥Use the specified unit to recharge the battery pack.

≥Do not use the battery pack with equipment other than the specified unit.

≥Do not get dirt, sand, liquids, or other foreign matter on the terminals.

≥Do not touch the plug terminals (iand j) with metal objects.

≥Do not disassemble, remodel, heat or throw into fire.

If any electrolyte should come into contact with your hands or clothes, wash it off

thoroughly with water.

If any electrolyte should come into contact with your eyes, never rub the eyes.

Rinse eyes thoroughly with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Battery pack 60 oC (140 oF)

VQT1B03_Eng.book 2 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

≥Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation

instructions and use only shielded interface cables with ferrite core

when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate this equipment.

Declaration of Conformity

Trade Name: Panasonic

Model No.: VW-PT2

Responsible party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-272-7262

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

VW-PT2

VQT1B03_Eng.book 3 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

-If you see this symbol-

¬Contents

Information for your safety ...................2

Before use...............................................4

Features..................................................6

Accessories............................................7

Parts identification and handling .........7

Charging the Battery..............................8

Inserting/Removing an SD card............9

Turning the unit on/off.........................10

About the HDD safety switch..............10

Copying data on an SD card to the HDD

..11

Copying data on the HDD or SD card to

a PC ...................................................12

Cautions for Use ..................................14

Troubleshooting...................................17

Specifications.......................................19

¬Before use

∫Try out the SD Media Storage

After copying data from an SD Memory

Card/SDHC Memory Card to the HDD,

connect the unit to a PC and check that the

data was copied normally.

∫Handling the HDD

The HDD is a very special device and

because of its high recording density and

high capacity for saving data it is easily

susceptible to damage. Be careful about

the following when using it.

The HDD is a device that is not built to

withstand vibration/shock or dust

Depending on the environment and

handling of the HDD, some content may

become damaged and in the worst case

copying and reading the data may no

longer be possible. In particular, do not

AC adaptor

This AC adaptor operates on AC between 100V and 240 V.

But

≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power

supply only.

≥When connecting to an AC supply outside of the U.S.A. or Canada, use a plug

adaptor to suit the AC outlet configuration.

≥When connecting to a supply of greater than AC 125V, ensure the cord you use is

suited to the voltage of the AC supply and the rated current of the AC adaptor.

≥Contact an electrical parts distributor for assistance in selecting a suitable AC plug

adaptor or AC cord set.

Marking sign is located on bottom of the unit.

Information on Disposal in other Countries outside the

European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or

dealer and ask for the correct method of disposal.

VQT1B03_Eng.book 4 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

subject it to vibration and shock or turn off

the power while using it.

Contact your dealer immediately if you

notice anything unusual with the HDD

If there are any defective parts inside the

HDD, there may be continuous noise

during copying, the sound may break up

etc. If you continue to use this unit, the

HDD will become worse and, in the worst

case, it may no longer be possible to use

the HDD. Contact your dealer immediately

in this kind of situation. If the HDD fails, the

data on it cannot be repaired.

Backup the HDD at fixed intervals

This product is a HDD device for temporary

storage. Copy important data to a PC to

prevent any losses of data caused by static

electricity, electromagnetic waves and

damage to or malfunction of this product.

≥Panasonic will in no way be liable for any

damages sustained directly or indirectly

from the use or failure of this product.

Panasonic will also in no way be liable

for any losses of data caused by this

product.

∫Carefully observe copyright laws

The materials that you record and create

can be used for your personal

entertainment only. Under copyright laws,

other materials cannot be used without

obtaining permission from the holders of

the copyrights.

≥Injury or material damage resulting

from any kind of use that is not in

accordance with the operating

Instructions are the sole

responsibility of the user.

≥The manufacturer shall in no event be

liable for the loss of recordings due to

malfunction or defect of this SD Media

Storage, its accessories or Memory

Card.

≥The nameplate of the SD Media Storage

is fixed on the bottom of the battery

compartment.

∫About the photographs and

illustrations in these operating

instructions

Please note that the actual controls and

components, etc. of your SD Media

Storage may look somewhat different from

those shown in the illustrations in these

Operating Instructions.

∫Pages for reference

Pages that you should refer to are shown

as (P00).

∫Use only the recommended

accessories.

≥Do not use any other USB connection

cables except the supplied one.

∫Cards that you can use with this

unit

You can use SD Memory Cards and SDHC

Memory Cards of the following capacity on

this unit.

SD Memory card SDHC

Memory card

8 MB, 16 MB, 32 MB,

64 MB, 128 MB, 256 MB,

512MB,1GB,2GB

(Maximum)

4GB

(Maximum)

VQT1B03_Eng.book 5 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

For the purposes of these operating

instructions, the following cards are

referred to as “the SD card”.

–SD Memory Card

–SDHC Memory Card

≥Please confirm the latest information on

the following website. (This website is in

English only.)

http://panasonic.co.jp/pavc/global/cs/

e_cam

≥This unit supports SD Memory Cards

formatted in FAT12 system and FAT16

system based on SD Memory Card

Specifications and SDHC Memory Cards

formatted in FAT32 system.

≥If you want to use a 4GB Memory Card,

only SDHC Memory Cards can be used.

≥4GB (or more) Memory Cards with no

SDHC logo are not based on SD

Memory Card Specifications.

≥SDHC Logo is a trademark.

≥miniSD Logo is a trademark.

≥We recommend that you use a

Panasonic brand SD card.

≥A MultiMediaCard cannot be used on

this unit.

≥Microsoft®and Windows®are either

registered trademarks or trademarks of

Microsoft Corporation in the United

States and/or other countries.

≥Apple, Mac OS is either registered

trademarks or trademarks of Apple

Computer, Inc. in the United States and/

or other countries.

≥IBM and PC/AT are registered

trademarks of International Business

Machines Corporation of the U.S.

≥PowerPC is a trademark of International

Business Machines Corporation.

≥Intel®, Pentium®and Celeron®are

registered trademarks or trademarks of

Intel Corporation in the United States

and other countries.

≥Intel®CoreTM Solo and Intel®CoreTM

Duo are either registered trademarks or

trademarks of Intel Corporation in the

United States and/or other countries.

≥Microsoft product screen shot(s)

reprinted with permission from Microsoft

Corporation.

≥Other names of systems and products

mentioned in these instructions are

usually the registered trademarks or

trademarks of the manufacturers who

developed the system or product

concerned.

¬Features

≥You can save a lot of moving pictures

and still pictures to its small,

lightweight and portable high

capacity 40 GB HDD (hard disk).

≥You can copy the data saved on the

HDD to a PC by connecting this unit

to the PC.

This unit is compatible with both SD

Memory cards and SDHC Memory

cards. You can only use SDHC

Memory cards on devices that are

compatible with them. You cannot use

SDHC Memory cards on devices that

are only compatible with SD Memory

cards. (When using a SDHC Memory

card on another device, be sure to use

devices that are compatible with

SDHC Memory cards.)

○○○×

(±: Available, —: Not available)

SDHC

Memory Card SD Memory

Card

SDHC compatible

device

SD compatible

device

VQT1B03_Eng.book 6 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

¬Accessories

Check the accessories before using this

unit.

≥This unit is a precision instrument so turn

off the power and put it in the carrrying

case when carrying it. Also, be careful

not to shake, drop or subject it to a

shock.

≥For the purposes of these operating

instructions, the battery pack is referred

to as “the battery”.

¬Parts identification and

handling

1 Strap fixture

2 Battery cover (P8)

3 Copy button [COPY] (P11)

4 Copy lamp (P11)

5 Cancel button [CANCEL] (P11)

6 Error display lamp [ERROR] (P18)

7 HDD SAFETY lamp (P10)

8 HDD capacity lamp

[FULL/75%/50%] (P11)

9 Status indicator (P8)

10 HDD/Card access lamp [ACCESS]

(P10)

11 Card slot (P9)

12 Card slot cover (P9)

13 Terminal cover

14 USB terminal [ ] (P12)

15 DC input terminal [DC IN 9.3V] (P8)

16 HDD SAFETY detection switch (P10)

17 HDD SAFETY switch [ON/OFF] (P10)

18 Power switch [ON/OFF] (P10)

Battery pack

CGA-S303

AC adaptor

VSK0681

AC cable

K2CA2CA00029

USB cable

K2KZ4CB00011

Carrying Case

VFC4228

VQT1B03_Eng.book 7 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

¬Charging the Battery

When this unit is purchased, the battery is

not charged. Charge the battery before

using this unit.

≥Set the power switch to [OFF] before

charging. If you turn on this unit while

charging, the charging will stop.

≥Always use genuine Panasonic batteries

(CGA-S303).

≥If you use other batteries, we cannot

guarantee the quality of this product.

≥Always use a genuine Panasonic AC

adaptor.

≥Do not use any other AC adaptors

except the supplied one.

1 Set the power switch to [OFF].

2 Remove the battery cover.

While pushing the battery cover

2slide it in the direction of the

arrow.

3 Insert the battery and then close the

battery cover.

1Place the battery label side B up.

2Insert the projecting parts Cof the

battery in the holes on the unit.

3Put the battery cover back in its

original place.

4 Connect the AC adaptor (supplied)

D to this unit and the AC outlet.

1Connect the AC cable to the AC

adaptor.

2Connect the AC cable to the AC

outlet.

3Open this unit’s terminal cover.

4Connect the AC adaptor to this

unit’s DC input terminal

[DC IN 9.3V].

≥The status indicator Eblinks at

intervals of about 2 seconds and

charging starts. Charging is

completed when the status indicator

goes off.

≥If the status indicator blinks faster,

refer to page 15.

≥Charging is normally completed after

about 1 hour and 30 minutes when the

temperature is 25 oC (77 oF) and the

humidity is 60%. (The charging time will

differ depending on the operating

conditions.)

≥The batterie heats up after use or

charging. The unit and the SD card also

heat up during use. This is not a

malfunction.

≥Be sure to turn off the power [OFF] and

check that the status indicator has gone

out before removing the battery cover

and then removing the battery. Put the

1 3

The AC cable is for use with this unit

only. Do not use it with other devices

or use the AC cable for other devices

with this unit.

VQT1B03_Eng.book 8 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

battery cover back in its original place

after removing the battery.

∫About the remaining battery

power

If the status indicator blinks at intervals of

about 1 second (blinks for about 0.5

seconds then goes off for about 0.5

seconds) when using the battery, the

remaining battery power has become low.

In this case, connect the AC adaptor or

charge the battery. If the battery is

completely discharged during copying, the

copying stops and the power automatically

turns off. You may not be able to playback

data that stopped being copied halfway.

Charge the battery sufficiently before

using the unit.

≥Refer to page 19 for information about

the battery operation time.

∫Connecting to the AC outlet

If you turn on this unit while charging the

battery using the AC adaptor, you can use

the power supplied from the AC outlet to

power the unit for use. (While it is in use,

the battery will not be charged.)

≥You can also use this unit with the AC

adaptor only. However, we recommend

using the unit with the battery also

inserted when charging etc. to prevent

the power supply stopping.

¬Inserting/Removing an

SD card

≥Before inserting/removing an SD

card, be sure to turn the power [OFF].

1 Set the power switch to [OFF].

≥Check that the status indicator A

has gone out.

2 Open the card slot cover.

3 Insert/remove the SD card into/from

the card slot.

≥When inserting an SD card, face the

label side Btowards you and press

it straight in with one stroke as far as

it goes.

≥When removing the SD card, open

the card slot cover and press the

center of the SD card and then pull it

straight out.

4 Securely close the card slot cover.

If the SD card is inserted or removed with

the power turned on, this unit may

malfunction or the data recorded on the

SD card may be lost.

OFF ON ONOFF

OFF ON

VQT1B03_Eng.book 9 ページ２００６年１１月１０日　金曜日　午後６時１１分

VQT1B03

∫About the SD card

≥We recommend that you use a

Panasonic brand SD card.

≥The SD card has a write

protection switch Con it. If

the switch is moved to

[LOCK], you cannot write

to the SD card, delete the

data on it or format it. If it is moved back,

you can.

≥Do not touch the terminals on the back of

the SD card.

≥Electrical noise, static electricity or the

failure of this unit or the SD card may

damage or erase the data stored on the

SD card. Also, save important data to a

PC etc.

∫About the miniSD Card (optional)

≥

Be sure to insert miniSD Cards in the

dedicated card adaptor before use.

Inserting a card in this unit without the

adaptor may damage the unit or the card.

≥Do not insert an empty card adaptor in

this unit. Do not leave the adaptor in this

unit while inserting or removing miniSD

Cards. This may cause the unit to

malfunction.

¬Turning the unit on/off

1 Insert the battery or

connect the AC adaptor.

≥When connecting to a PC, we

recommend connecting the AC

adaptor and inserting the battery to

power the unit for use.

Place the unit on an even, stable surface

and then set the power switch to [ON].

≥The status indicator lights and the

power turns on.

3 Set the power switch to [OFF] to turn

off the power.

≥The status indicator goes outand the

power turns off.

≥If the unit has not been used for about 3

minutes when using the battery only, the

power is automatically turned off to save

the battery life. Turn off, then turn on the

power to resume using the unit.

≥

Do not remove the battery or disconnect the

AC adaptor while the unit is on. The unit may

malfunction or the data may be destroyed.

∫

About the HDD/Card access lamp

When the unit accesses the

HDD or an SD card, the

access lamp Alights up.

≥Do not do the following operations when

the access lamp is lit. The HDD, the SD

card or the recorded data on the HDD or

the SD card may be damaged and this

unit may malfunction.

–Removing the SD card.

–Operating the [ON/OFF] switch.

–Removing the battery or AC adaptor.

–Disconnecting the USB cable.

About the HDD safety switch

If the HDD safety switch is set to [ON], the

HDD is automatically stopped when the unit is

lifted or set on a surface that is not even and

stable. This protects the HDD from damage.

≥

We recommend setting it to [ON] as the data

on the HDD may be destroyed if this unit is

mistakenly lifted and dropped while copying.

≥

If the HDD SAFETY detection switch

on the unit is activated, the HDD SAFETY

lamp

will blink and the operation will

stop. If this unit is placed on a level

surface, the operation will start again.

≥

Even if the HDD SAFETY switch is set to

[OFF] while copying, the HDD SAFETY

detection switch will be activated if this

unit is lifted.To protect the HDD, do not

move this unit while copying.

OFF ON ONOFF

OFF ON

When the unit is not being used, set the

power switch to [OFF].

OFF ON ONOFF

OFF ON

A B

VQT1B03_Eng.book 10 ページ２００６年１１月１０日　金曜日　午後６時１１分

Tabla de contenidos

Otros manuales de Almacenamiento de Panasonic

Panasonic

Panasonic CFVFS712W - SUPERDISK DRIVE Manual de usuario

Panasonic

Panasonic RP-SDP32GE1K Manual de usuario

Panasonic

Panasonic RP-SDZA64GAK Manual de usuario

Panasonic

Panasonic RP-SMGT16GAK Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Panasonic

Panasonic RP-SDUT64GAK Manual de usuario

Panasonic

Panasonic RP-SDU32GD1K Manual de usuario

Panasonic

Panasonic RP-SDP24GE1K Manual de usuario

Panasonic

Panasonic RP-SMFB16GAK Manual de usuario

Panasonic

Panasonic SUPERDISK LKM-FK73-D Manual de usuario

Panasonic

Panasonic RP-SDA32GE1K Manual de usuario

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manual de usuario

Panasonic

Panasonic JU-455-5 Manual de usuario

Panasonic

Panasonic KX-NCPS01 Manual de usuario

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manual de usuario

Panasonic

Panasonic CF-VFS251W Manual de usuario

Panasonic

Panasonic RP-SDUC64GAK Manual de usuario

Panasonic

Panasonic RP-SDUC32GAK Manual de usuario

Panasonic

Panasonic RP-SDW32GG1K Manual de usuario

Panasonic

Panasonic RP-SM16GEE1K Manual de usuario

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manual de usuario

Panasonic

Panasonic RP-SM02GCE1K Manual de usuario

Panasonic

Panasonic RP-SDRA32GEK Manual de usuario

Panasonic

Panasonic JU-475-4 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario

Dell

Dell PowerVault MD3600f Series Manual de usuario

CFI

CFI TERA STOR SATA RAID IV Manual de usuario