Panasonic EY45A1 Manual de usuario
© Panasonic Eco Solutions Power Tools Co., Ltd.
2012. All rights reserved. Unauthorized copying and
distribution is a violation of law.
Order Number PTD1209X09CE
Cordless Reciprocating Saw
Model No. EY45A1
Europe
Oceania
TABLE OF CONTENTS
PAGE PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 7
5 Wiring Connection Diagram ---------------------------------13
6 Schematic Diagram ---------------------------------------------13
7 Exploded View and Replacement Parts List -----------14
2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
3
3 Troubleshooting Guide
3.1. Troubleshooting Guide (Refer to Wiring Connection Diagram)
4
5
6
3.2. Trial Operation (after checking Troubleshooting Guide)
3.2.1. Assembly
• Confirm if there is no gap between housing A and B by pinching lead wires.
• There is no dust or deformation on battery terminals.
3.2.2. Operation
• Confirm the forward and reverse side of rotation.
• Confirm if the off-lock function works normally.
• Confirm if the switch handle move smoothly and properly.
• Check if the motor rotation become higher as the amount of depression of switch handle.
• Confirm if the blade bar assembly moves properly.
• Confirm if the rotation stops immediately when releasing the switch handle.
• There should be no metallic or abnormal sound and abnormal vibration when operating.
• Confirm if there is no abnormal sound when shaking the unit with the switch on.
• Confirm if there is no dirt when repairing.
• Confirm speed control.
7
4 Disassembly and Assembly Instructions
NOTE:Be sure to start disassembly after removing the blade and the battery pack.
4.1. Disassembly Instructions
4.1.1. Remove the baseplate, plug and clamping piece.
8
4.1.2. Remove the hand guard.
9
4.1.3. Remove the housing B, off lock lever and operation plate.
10
4.1.4. Remove the gear block assembly, switch assembly and main PCB.
4.1.5. Remove the motor lead wires.
Otros manuales para EY45A1
4
Tabla de contenidos
Otros manuales de Sierra de Panasonic
Panasonic
Panasonic EY3531 - 15.6V WOOD SAW Manual de usuario
Panasonic
Panasonic EY45A5 Manual de usuario
Panasonic
Panasonic EY3544-U1 Manual de usuario
Panasonic
Panasonic EY4541 Manual de usuario
Panasonic
Panasonic EY45A5 Manual de usuario
Panasonic
Panasonic EY3503 Manual de usuario
Panasonic
Panasonic EY47A1 Manual de usuario
Panasonic
Panasonic EY3551 - 18V WOOD SAW Manual de usuario
Panasonic
Panasonic EY3551 Manual de usuario
