Panasonic PT-RZ990 Manual de usuario

Thank you for purchasing this Panasonic product.

■This manual is common to all the models regardless of sufxes of the Model No.

zfor Taiwan

B: Black model, the standard zoom lens supplied

zfor India

BD: Black model, the standard zoom lens supplied LBD: Black model, the lens sold separately

zfor Korea

B: Black model, the standard zoom lens supplied W: White model, the standard zoom lens supplied

zfor other countries or regions

B: Black model, the standard zoom lens supplied LB: Black model, the lens sold separately

W: White model, the standard zoom lens supplied LW: White model, the lens sold separately

■Before operating this product, please read the instructions carefully and save this manual

for future use.

■Before using this product, be sure to read “Read this rst!” (xpages 5 to 17).

DPQP1335ZA/X1

DLP™ Projector Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. PT-RZ990

PT-RZ890

PT-RZ790

PT-RZ690

2 - ENGLISH

Contents

Read this rst! 5

Chapter 1 Preparation

Precautions for use 21

Intended use of the product 21

Cautions when transporting 21

Cautions when installing 21

Security 24

DIGITAL LINK 25

Art-Net 25

Application software supported by the projector 25

Storing 25

Disposal 26

Cautions on use 26

Accessories 27

Optional accessories 28

About your projector 29

Remote control 29

Projector body 31

Preparing the remote control 34

Inserting and removing the batteries 34

When using the multiple projectors 34

Connecting the remote control to the projector

with a cable 34

Chapter 2 Getting Started

Setting up 36

Usable outlet 36

Installation mode 36

Parts for installation (optional) 38

Projected image and throw distance 38

Adjusting adjustable feet 47

Removing/attaching the projection lens 48

Removing the projection lens 48

Attaching the projection lens 49

Connecting 50

Before connecting 50

Connecting example: AV equipment 50

Connecting example: Computers 51

Connecting example using DIGITAL LINK 52

Connecting example when using the

contrast synchronization function/shutter

synchronization function 53

Chapter 3 Basic Operations

Switching on/off the projector 56

Connecting the power cord 56

Power indicator 57

Switching on the projector 58

When the initial setting screen is displayed 59

When the administrator account setting screen

is displayed 65

Making adjustments and selections 67

Switching off the projector 68

Projecting 69

Selecting the input signal 69

Adjusting the focus, zoom, and lens shift 70

Adjusting the focus balance 71

Setting the lens type 72

Moving the projection lens to the home position 72

Lens shift range 73

Operating with the remote control 75

Using the shutter function 75

Using the on-screen display function 75

Using the automatic setup function 76

Using the function button 76

Displaying internal test pattern 76

Using the status function 77

Setting ID number of the remote control 77

Chapter 4 Settings

Menu navigation 79

Navigating through the menu 79

Main menu 80

Sub-menu 81

[PICTURE] menu 84

[PICTURE MODE] 84

[CONTRAST] 84

[BRIGHTNESS] 84

[COLOR] 85

[TINT] 85

[COLOR TEMPERATURE] 85

[WHITE GAIN] 87

[GAMMA] 87

[SYSTEM DAYLIGHT VIEW] 88

[SHARPNESS] 88

[NOISE REDUCTION] 89

[DYNAMIC CONTRAST] 89

[SYSTEM SELECTOR] 90

[DEFAULT PICTURE MODE] 91

sRGB-compliant video 91

[POSITION] menu 93

[SHIFT] 93

[ASPECT] 93

[ZOOM] 94

[CLOCK PHASE] 95

ENGLISH - 3

Contents

[GEOMETRY] 95

[ADVANCED MENU] menu 101

[DIGITAL CINEMA REALITY] 101

[BLANKING] 101

[INPUT RESOLUTION] 102

[CLAMP POSITION] 102

[EDGE BLENDING] 102

[FRAME RESPONSE] 104

[RASTER POSITION] 105

[DISPLAY LANGUAGE] menu 106

Changing the display language 106

[DISPLAY OPTION] menu 107

[COLOR MATCHING] 107

[COLOR CORRECTION] 108

[SCREEN SETTING] 108

[AUTO SIGNAL] 109

[AUTO SETUP] 109

[BACKUP INPUT SETTING] 110

[RGB IN] 112

[DVI-D IN] 113

[HDMI IN] 115

[DIGITAL LINK IN] 116

[SDI IN] 118

[ON-SCREEN DISPLAY] 119

[MENU MODE] 121

[IMAGE ROTATION] 121

[BACK COLOR] 122

[STARTUP LOGO] 122

[UNIFORMITY] 122

[SHUTTER SETTING] 123

[FREEZE] 125

[WAVEFORM MONITOR] 125

[CUT OFF] 126

[PROJECTOR SETUP] menu 127

[PROJECTOR ID] 127

[PROJECTION METHOD] 127

[LENS] 128

[OPERATION SETTING] 129

[LIGHT OUTPUT] 134

[BRIGHTNESS CONTROL] 134

[STANDBY MODE] 139

[QUICK STARTUP] 139

[NO SIGNAL SETTING] 139

[INITIAL STARTUP] 143

[STARTUP INPUT SELECT] 144

[DATE AND TIME] 144

[SCHEDULE] 145

[MULTI PROJECTOR SYNC] 147

[RS-232C] 149

[REMOTE2 MODE] 151

[FUNCTION BUTTON] 151

[STATUS] 151

[DATA CLONING] 153

[SAVE ALL USER DATA] 155

[LOAD ALL USER DATA] 155

[INITIALIZE] 155

[SERVICE PASSWORD] 156

[TEST PATTERN] menu 157

[TEST PATTERN] 157

[SIGNAL LIST] menu 158

Registering new signals 158

Renaming the registered signal 158

Deleting the registered signal 158

Protecting the registered signal 159

Expanding signal lock-in range 159

Sub memory 160

[SECURITY] menu 161

[SECURITY PASSWORD] 161

[SECURITY PASSWORD CHANGE] 161

[DISPLAY SETTING] 161

[TEXT CHANGE] 162

[CONTROL DEVICE SETUP] 162

[CONTROL DEVICE PASSWORD CHANGE] 163

[NETWORK] menu 165

[ETHERNET TYPE] 165

[DIGITAL LINK] 165

[WIRED LAN] 167

[PROJECTOR NAME] 167

[NETWORK STATUS] 168

[ADMINISTRATOR ACCOUNT] 168

[NETWORK CONTROL] 170

[PJLink] 171

[Art-Net] 172

Chapter 5 Operations

Network connection 176

Connecting to the network 176

Web control function 179

Computer that can be used for setting 179

Accessing from the web browser 179

Updating the rmware 197

Updating the rmware via LAN 197

Chapter 6 Maintenance

Light source/temperature indicators 203

When an indicator lights up 203

Maintenance 205

Before maintaining the projector 205

Maintenance 205

Troubleshooting 206

[SELF TEST] indications 208

4 - ENGLISH

Contents

Chapter 7 Appendix

Technical information 211

Using the PJLink function 211

Using Art-Net function 212

Control commands via LAN 216

<SERIAL/MULTI PROJECTOR SYNC

IN>/<SERIAL/MULTI PROJECTOR SYNC

OUT> terminals 219

<REMOTE 2 IN> terminal 223

<RGB 2 IN> terminal 224

Upgrade Kit 224

List of compatible signals 225

Specications 232

Dimensions 235

Precautions for attaching the Ceiling Mount

Bracket 236

Index 238

ENGLISH - 5

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid

incommoding reexions at visual display workplaces this device must not be placed in the direct

eld of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-

type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the

earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32.

In a residential environment this equipment may cause radio interference.

(for Taiwan)

WARNING:

This equipment complies with the Class A standard of CNS13438.

This is Class A information technology equipment that may cause radio frequency interference when used in a

residential environment, in which the user will be required to take certain appropriate countermeasures.

CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using

the provided power cord and shielded interface cables when connecting to computer or peripheral

devices. Also, any unauthorized changes or modications to this equipment could void the user’s

authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a

domestic environment.

Directive 2009/125/EC

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

6 - ENGLISH

Read this rst!

WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

WARNING: Do not look at the light emitted from the lens while the projector is being used.

As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.

Indicated on the projector

Notice on laser

(for USA and Canada)

This projector is the Class 3R laser product that complies with IEC 60825-1:2007.

For North America

“Complies with 21 CFR Parts 1040.10 and 1040.11

except for deviations pursuant to Laser Notice

No.50 dated June 24.2007”

IEC 60825-1:2007

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

WAVE LENGTH:448- 462nm

MAXIMUM OUTPUT:248mW

PULSE DURATION:1.1ms

IEC 60825-1:2007

RAYONNEMENT LASER

EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX

APPAREIL ÀLASER DE CLASSE 3R

LONGUEURS D'ONDES:448-462nm

MAXIMALE DU RAYONNEMENT:248mW

DURÉE DE L'IMPULSION:1.1ms

(Inside of product)

ENGLISH - 7

Read this rst!

(for Taiwan)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

第1類雷射產品

(for India)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

(for other countries or regions)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein

may result in hazardous radiation exposure.

CAUTION (North/Middle/South America)

Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a

separate 250 V power cord. If you use the accessory cord in such situations, re may result.

8 - ENGLISH

Read this rst!

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not

remove the grounding pin on the power plug. This plug will only t a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the

outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

ENGLISH - 9

Read this rst!

FCC NOTICE (USA)

Supplier’s Declaration of Conformity

Model Number: PT-RZ990B / PT-RZ990W / PT-RZ990LB / PT-RZ990LW

PT-RZ890B / PT-RZ890W / PT-RZ890LB / PT-RZ890LW

PT-RZ790B / PT-RZ790W / PT-RZ790LB / PT-RZ790LW

PT-RZ690B / PT-RZ690W / PT-RZ690LB / PT-RZ690LW

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America

Address: Two Riverfront Plaza, Newark, NJ 07102-5490

General Contact: http://www.panasonic.com/support

Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any

unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

10 - ENGLISH

Read this rst!

IMPORTANT: THE MOLDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse

is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating

of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover

can be purchased from an Authorized Service Center.

If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be

removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the

cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below.

If in any doubt, please consult a qualied electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

Green - and - Yellow: Earth

Blue: Neutral

Brown: Live

As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings

identifying the terminals in your plug, proceed as follows.

The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug

which is marked with the letter E or by the Earth symbol or colored GREEN or GREEN - AND -

YELLOW.

The wire which is colored BLUE must be connected to the terminal in the plug which is marked

with the letter N or colored BLACK.

The wire which is colored BROWN must be connected to the terminal in the plug which is marked

with the letter L or colored RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Panasonic

Panasonic

Panasonic PT-RZ670 series Manual de usuario

Panasonic

Panasonic PT-LC50E Manual de usuario

Panasonic

Panasonic PT-CX300 Manual de usuario

Panasonic

Panasonic PT-AE300E Manual de usuario

Panasonic

Panasonic PT-LC70U Manual de usuario

Panasonic

Panasonic PT51G43 - 51" PROJECTION TV Manual de usuario

Panasonic

Panasonic PT-D10000U Manual de usuario

Panasonic

Panasonic PT D4000E Manual de usuario

Panasonic

Panasonic PT-DZ870U Manual de usuario

Panasonic

Panasonic PT-LB55NT Manual de usuario

Panasonic

Panasonic PT-D5700U - XGA DLP Projector Manual de usuario

Panasonic

Panasonic PT-LB3EA Manual de usuario

Panasonic

Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform... Manual de usuario

Panasonic

Panasonic PT-L735 Manual del sistema

Panasonic

Panasonic PT-FW300NT Manual del sistema

Panasonic

Panasonic PT-LB1E Manual de usuario

Panasonic

Panasonic PT-RZ475 series Manual de usuario

Panasonic

Panasonic PT-JX200FWE Instrucciones de funcionamiento

Panasonic

Panasonic PT-VX431K Manual de usuario

Panasonic

Panasonic PT-CW330EA Manual de usuario

Panasonic

Panasonic PT-REQ12 Series Manual de usuario

Panasonic

Panasonic PT-CW331R Manual de usuario

Panasonic

Panasonic PT-ST10U Manual de usuario

Panasonic

Panasonic PT-LB10NT Manual del sistema

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario