Panasonic ET-PLF20 Manual de usuario
ENGLISH
FRANÇAIS
日本語
Operating Instructions
Lens Fixed Attachment
Model No. ET-PLF20
DPQX1427ZA/X1
Commercial Use
Thank you for purchasing this Panasonic product.
■To ensure safe and correct use, please read this manual together with the operating instructions supplied
with the projector carefully.
■ Before using this product, be sure to read “Read this rst!” (Page 3).
■Please save this manual for future use.
2 - ENGLISH
Contents
Read this rst! ................................................................................................... 3
Before Use.......................................................................................................... 4
Attaching and Detaching the Lens Fixing Attachment .................................. 5
Preparing the Projection Lens ............................................................................................ 5
Preparing the Lens Fixing Attachment................................................................................ 5
Attaching the Lens Fixing Attachment ................................................................................ 7
Detaching the Lens Fixing Attachment ............................................................................... 8
Specications .................................................................................................... 9
External Dimensions......................................................................................... 9
Dimensions when Attached to Projector ...................................................... 10
ENGLISH - 3
Read this rst!
WARNING:
Before attaching the lens xing attachment, be sure to turn off the power and disconnect the power
plug from the wall outlet.
zUnexpected projection of light may cause injury to eyes.
zReplacing without removing the power plug may result in electrical shock.
Do not allow children to reach the supplied at washers, spring washers, and thumbscrews.
zThese items can cause personal injury if swallowed.
zIf swallowed, seek medical help immediately.
CAUTION:
Do not touch any part or remove parts other than specied.
zDoing so may cause a loss of performance or safety.
Information for users in the European Union
Importer’s name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Always follow these precautions
4 - ENGLISH
Before Use
■Overview
This product suppresses vibration of projection images due to vibration of the lens by xing the projection lens of
the projector.
■Supported Lens
ET-D3LEU100 / ET-D3LEW200
■Supported Projectors
PT-RQ32K, PT-RZ31K, and PT-RS30K series
PT-RQ22K, PT-RZ21K, and PT-RS20K series
PT-RQ13K, PT-RZ12K, and PT-RS11K series
Note
zModels other than the above may also be supported. Refer to the operating instructions of the projector you
are using.
■Structural components
Part name Appearance (quantity) Application
Lens xing attachment
mount bracket
x1
This part attaches to the projector unit.
It is a bracket for attaching the lens xing
attachment bracket
Lens xing attachment
bracket (A)
x1
This part attaches to the lens xing
attachment mount bracket.
It is a bracket for adjusting and xing the
positions of the lens xing brackets.
Lens xing attachment
bracket (B)
x1
Lens xing bracket
x4
This part attaches to the lens xing
attachment mount bracket.
They are brackets for xing the lens.
Screws and washers Spring washer (M4)
x4
These are used for bracket assembly and
xing the lens xing brackets.
The spring washers and at washers
are used for the thumbscrews of the
lens xing brackets.
Flat washer (M4)
x4
Thumbscrew (M4 x 10)
x10
ENGLISH - 5
Attaching and Detaching the Lens Fixing Attachment
Preparing the Projection Lens
Attach the lens xing attachment after installing and adjusting the lens.
Attention
zThe projection lens will be xed after attaching the lens xing attachment. Do not perform lens calibration or
lens adjustment after the lens xing attachment is attached.
Preparing the Lens Fixing Attachment
1) Remove the two upper thumbscrews (inserted
in round holes).
2) Loosen the two lower thumbscrews (inserted
in slots).
3) Remove the lens fixing attachment bracket as
shown in the figure.
Lens xing attachment bracket (B)
Lens xing attachment
mount bracket
Lens xing attachment bracket (A)
Thumbscrews
Thumbscrews
Lens xing
attachment mount
bracket
Lens xing attachment bracket (B)
Lens xing attachment bracket (A)
6 - ENGLISH
Attaching and Detaching the Lens Fixing Attachment (continued)
4) Loosen the thumbscrews (two places) at the
center of the lens fixing attachment bracket.
5) Separate lens fixing attachment bracket (A)
and lens fixing attachment bracket (B) as
shown in the figure.
Thumbscrews
Lens xing attachment bracket (B)
Lens xing attachment bracket (A)
ENGLISH - 7
Attaching and Detaching the Lens Fixing Attachment (continued)
The illustrations for this procedure use the
PT-RZ21K as an example.
1) Of the screws that surround projection lens at
its four corners (two screws at each corner)
on the front of the projector, remove the inner
screws (four screws total).
zFor the following projectors, there is only one
screw at each corner surrounding the projection
lens. Remove the screws at each corner (four
screws total) for these projectors.
PT-RQ32K, PT-RZ31K, and PT-RS30K series
PT-RQ13K, PT-RZ12K, and PT-RS11K series
2) Fix the upper part of the lens fixing attach-
ment mount bracket using two of the screws
that were removed in step 1.
zTighten the screws at positions where screws
were removed in step 1.
3) Fix the lower part of the lens fixing attach-
ment mount bracket using the remaining two
screws.
zTighten the screws at positions where screws
were removed in step 1.
4) Attach lens fixing attachment bracket (A) and
lens fixing attachment bracket (B) from the
left and right so that the lens fits between
them as shown in the figure.
zAlign the screws of lens xing attachment
bracket (B) and the grooves of lens xing at-
tachment bracket (A).
Screws
Screws
Screws
Screws
Lens xing attachment
bracket (B)
Lens xing attachment
bracket (A)
Attaching the Lens Fixing Attachment
8 - ENGLISH
Attaching and Detaching the Lens Fixing Attachment (continued)
Detaching the Lens Fixing Attachment
zWhen removing the lens xing attachment, remove it by performing the procedure of “Attaching the Lens Fixing
Attachment” (pages 7 to 8) in reverse.
zWhen assembling and then storing the lens xing attachment, assemble it by performing the procedure of “Pre-
paring the Lens Fixing Attachment” (pages 5 to 6) in reverse.
5) Attach the lens fixing attachment bracket to
the lens fixing attachment mount bracket as
shown in the figure.
6) Fix the upper part of the lens fixing attach-
ment bracket in place using the thumbscrews
removed in step 1 of “Preparing the Lens Fix-
ing Attachment.”
7) Fix the lower part of the lens fixing attach-
ment bracket in place using thumbscrews (two
places).
8) Fix the center of the lens fixing attachment
bracket in place using thumbscrews (two
places).
9) Loosen the thumbscrews (four places) of the
lens fixing bracket.
10) Push the lens fixing brackets up against the
lens and then fix them in place using thumb-
screws (four places).
Note
zWhen the projector's active focus optimizer func-
tion is used, the function may not operate properly
if this product is attached. In such a case, take
care not to apply excessive force when pushing
the lens xing brackets up against the projection
lens.
Thumbscrews
Thumbscrews
Thumbscrews
Thumbscrews
Thumbscrews
ENGLISH - 9
Specications
External dimensions
Width: 238 mm (9-3/8")
Height: 125 mm (4-29/32")
Depth: 236 mm (9-9/32")
Weight Approx. 0.9 kg(2.0 lb)
External Dimensions
(Unit: mm)
125 (4-29/32")
99 (3-29/32")
73 (2-7/8")
26 (1-1/32")
33
(1-5/16")
113.5 (4-15/32")
236 (9-9/32")
225.5 (8-7/8")
238 (9-3/8")
33 (1-5/16")
10 - ENGLISH
Dimensions when Attached to Projector
■PT-RQ32K / PT-RZ31K / PT-RS30K
(Unit: mm)
238 (9-3/8")
84
(3-5/16")
58
(2-9/32")
14 (9/16")
120 (4-23/32")
■PT-RQ22K / PT-RZ21K / PT-RS20K
(Unit: mm)
238 (9-3/8")
88
(3-15/32")
114 (4-1/2")
14.5
(9/16)
19 (3/4")
■PT-RQ13K / PT-RZ12K / PT-RS11K
(Unit: mm)
238 (9-3/8")
88 (3-15/32")
114 (4-1/2")
14.5
(9/16")
19 (3/4")
Tabla de contenidos
Otros manuales de Proyector de Panasonic
Panasonic
Panasonic PTL501U - LCD PROJECTOR Manual de usuario
Panasonic
Panasonic PT-EX600U Manual de usuario
Panasonic
Panasonic PT-56SX30 Manual de usuario
Panasonic
Panasonic PT-F300EA Manual de usuario
Panasonic
Panasonic PT-LB2E Manual de usuario
Panasonic
Panasonic PT-TW370 Manual de usuario
Panasonic
Panasonic PT-DX810E Manual de usuario
Panasonic
Panasonic PT-EX16KE Manual de usuario
Panasonic
Panasonic PT-D3500U Series Manual de uso y mantenimiento
Panasonic
Panasonic PT51G54A - 51" PROJECTION TV Manual de usuario
Panasonic
Panasonic Tentative PT-LB50NTU Manual de usuario
Panasonic
Panasonic PT-D4000 Manual de usuario
Panasonic
Panasonic PT-FRQ60WU7 Manual de usuario
Panasonic
Panasonic PT-VW535N Manual de usuario
Panasonic
Panasonic PTD7600U - DLP PROJECTOR Manual de usuario
Panasonic
Panasonic PT-D5700U - XGA DLP Projector Manual de usuario
Panasonic
Panasonic PT-D4000E Manual de usuario
Panasonic
Panasonic PT-AE7000U Manual de usuario
Panasonic
Panasonic PT-TW371RD Instrucciones de funcionamiento
Panasonic
Panasonic PT-D5600 Manual del sistema
