Panasonic LFE Series Manual de usuario

USB Media Player

User Guide

Ver. 1.0

5. Insert USB memory and use

Table of Contents 2

6-1. Deliver content

A) Single-Playback

Plays on a single display

6. Deliver content on USB memory via LAN

B) Multi-Playback

Synchronize a maximum of four displays and play

A) Save content on USB memory and play.

All still images have the same play duration.

HUB

B) Save content + scenario files on the USB memory and play.

You can set play duration and order of

each content as you choose.

6-2. Set date/time of delivery/playback and deliver

For both Single and Multi-Playback –Page 15

7. Convert PowerPoint data to still/moving images

–Page 17

8. Light ID setting (SF1H series only)

–Page 18

1. Compatible Models –Page 3

2. Supported devices and formats –Page 4

3. Limitations on compatible formats –Page 5

4. Set up the display –Page 6

–Page 7

–Page 8

–Page 10

1. Compatible Models

Series Model Number

LFE Series *1 TH-43LFE8

TH-49LFE8

TH-55LFE8

TH-65LFE8

EF Series TH-32EF1

TH-65EF1

TH-75EF1

TH-84EF1

SF series TH-42SF1H

TH-49SF1H

TH-55SF1H

TH-43SF2

TH-49SF2

TH-55SF2

TH-65SF2

LF Series TH-42LF8

TH-49LF8

TH-55LF8

TH-42LF80

TH-49LF80

TH-55LF80

LFV Series TH-55LFV6

TH-55LFV60

TH-55LFV70*2

VF Series TH-55VF1H

AF Series*2 TH-42AF1J

TH-49AF1J

TH-55AF1J

*1: Main microcomputer versions of 2.02 and later on displays are

compatible with the LFE series.

Refer to the website about how to verify the version.

https://panasonic.net/cns/prodisplays/download/software/multi/

*2: AF series and TH-55LFV70 are not compatible.

As of July. 2017

2. Supported devices and formats 4

Extension Format Limitation

Jpg/jpeg/jpe JPEG Number of pixels: Maximum 4096 x 4096 (supports baseline only)

YUV format: supports YUV444, YUV442 and YUV440

Colour mode: supports RGB only

Bmp

(65/75/84EF1, VF1H

and SF2 series only)

Windows

Bitmap

Number of pixels: Maximum 4096 x 4096 (1 bit, 4 bits, 8 bits, 24

bits)

Following formats are not supported: Run-length encoding, bit field,

top-down, transparent Data

Commercially available USB memory devices are supported. (Those with security functions

are not supported. Operation is not guaranteed.)

USB memory devices other than those formatted in FAT16 or FAT32 cannot be used.

Up to 32 GB of USB memory in size are supported.

Only single partition configuration is supported.

Depending on the type of a USB memory device, it may come in contact with the periphery

such as a back cover, and cannot be attached. Use a commercially sold extension cable, or

use a small type of a USB memory device connectable to this unit.

Only jpg files (except progressive JPEG) can be used for still images when using multiple monitoring &

control software.

Extension Codec

Video Audio

avi MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3(MP3), Linear

PCM

mkv MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, Linear PCM,

AAC, HE-AAC

Asf/wmv MPEG4 AVC/H.264, MPEG-4 Visual, VC-1

Advanced, VC-1, Simple & Main

MPEG-1/2 Audio Layer-3, WMA

Standard, WMA9/10Pro

Ts/mts MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, HE-AAC

Mp4 MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, AAC, HE-AAC

3gp MPEG4 AVC/H.264, MPEG-4 Visual AAC, HE-AAC

mov MPEG4 AVC/H.264, MPEG-4 Visual MPEG-1/2 Audio Layer-3, Linear PCM,

AAC, HE-AAC

Flv/f4v MPEG4 AVC/H.264 MPEG-1/2 Audio, Layer-3, AAC, Linear

PCM

3. Limitaion on compatible formats 5

Video Codec

MPEG-4, AVC/H.264,

High Profile

Resolution: maximum 1920 x 1080

Frame rate: maximum 30fps (progressive)

Bit rate: maximum 30Mbps

- Level 4.2 or less

- MVC (multi-view) is not supported.

MPEG-4 Visual, Simple Profile

and Advanced Simple Profile

Resolution: maximum 1920 x 1080

Frame rate: maximum 30fps (progressive)

Bit rate: maximum 30Mbps

- Only 1 warp-point GMC supported

- Data Partitioning is not supported.

VC-1, Simple Profile and

Main Profile

Resolution: maximum 1920 x 1080

Frame rate: maximum 30fps (progressive)

Bit rate: maximum 20Mbps

VC-1, Advanced Profile Resolution: maximum 1920 x 1080

Frame rate: maximum 24fps (progressive)

Maximum 30fps (interlaced)

Bit rate: maximum 30Mbps

- Level: L3 or less supported

Audio Codec Sampling frequency (kHz) Bit rate (kbps)

MP3 8/10.025/12/16/22.05/24/32/44.1/48 8 - 320

WMA

Standard

32 - 384

WMA 9 32 - 384

WMA 10 Pro 32 - 384

LPCM 64 - 1536

Corresponding quantization bit:

8/16/24/32

AAC 8 - 1440

HE-AAC 8 - 256

Maximum size per one file is 2 GB.

Some files may not be played back even if their formats are supported as described here.

Files protected by Digital Rights Management (DRM) cannot be played back.

Make sure that both audio codec and video codec are supported. If the audio codec of motion picture

file is incompatible in format, the pictures may not be correctly displayed. In addition, files which contain

only audio cannot be played back.

Playback is not possible if the maximum bit rate specified in the codec Profile or Level is exceeded. Also,

depending on the USB memory device, playback may be impossible even if the bit rate is less than the

indicated maximum bit rate.

4. Set up the display 6

Select [Setup] → [USB media player settings] on the second page with the

remote control.

(1) USB media player *Factory setting is [Enable].

Set [USB media player] to [Enable].

(2) Schedule play function (SF2 series only) *Factory setting is [Disables].

Enables/Disables the schedule playback function using “Content Management Software”.

If the schedule file which made by “Content Management Software” is stored in USB memory,

it should be set to [Disables].

(2) Video playback mode (SF2 series, 65/75/84EF1, VF1 only) *Factory setting is [Standard].

Sets the video playback mode.

Standard: Plays without a black image at the joint between video files.

Adjust : Plays with a black image (approx. 2 seconds) inserted at the joint between video files.

*Depending on format, some moving image files may not make correct transitions between files.

In this case, set to [Adjust].

(3) Resume play *Factory setting is [On].

[On]: When the media player finishes by being switched off, the content playing at the finish time

will be played next time it is switched on.

[Off]: First content is always played in alphanumeric order by file name.

*This function does not work when the display is turned off or the USB memory is unplugged.

(4) Slide show duration *Factory setting is [10 sec].

Select the display duration for still images. From 10 –600 sec.

For moving image files, the duration of the moving image playback is prioritized.

For 65/75/84EF1, VF1

Except for 65/75/84EF1, VF1 For SF2 series

5. Insert USB memory and use 7

USB memory PC

Multi Monitoring

& Control

Software

LAN cable Divider

Necessary Necessary Unnecessary Unnecessary Unnecessary

A) Save content on USB memory and play.

1. Save content on USB memory.

Save prepared content of still or moving images on USB

memory using a computer.

* Files are played in alphanumerical order in the USB memory.

(Smaller number → bigger number → alphabetical order)

* When the portrait setting, please check direction of rotation

for using display before create the content.

* Save the content in the root directory (e.g. E:\) and not in a

folder.

2. Insert USB memory into display.

(1) Insert USB memory with content saved into the USB port

on the display.

(2) Change to [USB] input of the display.

Play the content in alphanumeric (character code) order.

B) Save content + scenario files on the USB memory and play

USB memory PC

Multi Monitoring

& Control

Software

LAN cable Divider

Necessary Necessary Necessary Unnecessary Unnecessary

5. Insert USB memory and use

1. Activate multi monitoring & control software.

(1) Download Multi Monitoring & Control Software (MMCS) from the Website and install it on a computer.

(2) Activate MMCS.

(3) Right-click on Group and display the menu.

(4) Select [Content list editing and delivery].

(5) Select [Content list editing].

Download from here

⇒https://panasonic.net/cns/prodisplays/download/software/index.html

2. Create the content list.

*Save the content on a computer beforehand.

(1) Select the content list name.

- Maximum of 50 content lists can be created.

- List names can be arbitrarily changed. (Within

16 alphanumeric characters)

(2) Click [Add].

The explorer will open and select the folder where

the content was saved.

(3) Select the content you want to play.

(4) Click [Open]..

(3)

(4)

(5)

(1)

(2)

(3)

(4)

(5) Selected content will be displayed in the play list.

(6) Set the play time for one content item.

Still images: Set within from 3 –86,400 sec.

Moving images: The play time for the moving

image is displayed.

(7) Set up the play order for the content. Select

content for which you want to change order,

move it using the ▼or ▲button.

5. Insert USB memory and use

(5) (6)

(7)

3. Save content list on USB memory.

(1) Set the USB memory on which content is to be saved in the USB port of the computer.

(2) Click [Save] and select a device of your choice.

(3) A message will appear when saving is completed.

5. Insert USB memory in main display.

(1) Insert the USB memory on which the content is saved in the USB port on the display.

(2) Change to [USB] input of the display.

Play the content according to the created content list.

(2)

(3)

4. Insert USB memory into display.

USB memory PC

Multiple

Monitoring &

Control Software

LAN cable Divider

Necessary Necessary Necessary Necessary Necessary

6. Deliver content on USB memory via LAN

6-1. Deliver content

1. Set up network.

Select [Setup] → [Network settings] on the second page with the remote control.

(1) Network control *Factory setting is [Off].

Set network control to [On].

(2) Display name *Factory setting is [Name of “series-00”].

This name is displayed on the network. When you operate more than one computer,

changing the name is recommended.

(3) LAN set up *Factory setting is as the right figure shows.

When using an existing network, set up the LAN on this screen.

The display to be connected and the computer operated should

be in the same network.

(4) Network status

This screen is to confirm the network settings.

Check 1: LAN cable

•Use LAN cables compatible with CAT5 and later.

*Note that LAN cables compatible with CAT5e and later are necessary for delivery via DIGITAL LINK.

Check 2: Settings for wired LAN

•For computers built-in wired LAN function,

- set the wired LAN to [Enable].

•For computers without wired LAN function,

- confirm that the wired LAN adaptor is correctly identified and enabled.

Check 3: Supported OS Windows PC only

Check the following before connection!

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Reproductor multimedia de Panasonic

Panasonic

Panasonic CQ-C8400 Manual de usuario

Panasonic

Panasonic FZ-35S Manual de usuario

Panasonic

Panasonic DMP-MST60 Manual de usuario

Panasonic

Panasonic SV-MP720VGC Manual de usuario

Panasonic

Panasonic CQ-DFX203N Manual de usuario

Panasonic

Panasonic SVAV20U - SD MULTI MEDIA TERMI Manual de usuario

Panasonic

Panasonic SV-MP720VSG Manual de usuario

Panasonic

Panasonic SV-SD350VGC Manual de usuario

Panasonic

Panasonic FZ-1 Manual de usuario

Panasonic

Panasonic CQ-C1301NW Manual de usuario

Panasonic

Panasonic CQC1300U - AUTO RADIO/CD DECK Manual de usuario

Panasonic

Panasonic DMP-MST60 Manual de usuario

Panasonic

Panasonic SVSD85 - SD AUDIO PLAYER Manual de usuario

Panasonic

Panasonic SV-SW31VGC Manual de usuario

Panasonic

Panasonic CQ-C3301N Manual de usuario

Panasonic

Panasonic FZ-35S Manual de usuario

Panasonic

Panasonic CQ-HX1003W Manual de usuario

Panasonic

Panasonic SV-MP500VGK Manual de usuario

Panasonic

Panasonic SC-HC29DB Manual de usuario

Panasonic

Panasonic CQ-C7303N Manual de usuario

Panasonic

Panasonic KX-T77 Series Manual de usuario

Panasonic

Panasonic DMP-MS10 Manual de usuario

Panasonic

Panasonic CQDFX972U - AUTO RADIO/CD DECK Manual de usuario

Panasonic

Panasonic SV-AV20A Manual de usuario

Manuales populares de Reproductor multimedia de otras marcas

Visual Land

Visual Land Impulse Manual de usuario

limHD

limHD 200i Manual de usuario

Transcend

Transcend DMP10 Manual de usuario

Philips

Philips GoGear Muse SA2MUS08 Manual de usuario

Fantec

Fantec MM-HDRL Manual de usuario

Dune HD

Dune HD Duo 4K Manual de usuario

IAdea

IAdea HMP-505S Manual de usuario

Camos

Camos MMS-1000 Manual de usuario

Energy

Energy 75 Series Manual de usuario

Z3 Technology

Z3 Technology DME-03 Manual de usuario

Sony

Sony SVR-2000 Guía del usuario

Meicheng

Meicheng HD-1080K12 Manual de usuario

DENAFRIPS

DENAFRIPS ARCE Manual de usuario

Topaz

Topaz CMS Media Player Instrucciones de uso

InFocus

InFocus LightCast Manual de usuario

IconBiT

IconBiT XDS1003D Manual de usuario

Quanmax

Quanmax QDSP-2090 Series Manual de usuario

Samsung

Samsung MP-80S Manual de usuario