Panasonic SC-HT540 Manual de usuario

RQT8723-B

Operating Instructions

DVD Home Theater Sound System

Model No. SC-HT540/SC-HT990

All necessary steps of setup are completed.

Please see the Operations Guide for playback operations.

STEP1Assembling the speakers

STEP2Positioning the speakers

STEP3Speaker connections

STEP4Audio and video connections

STEP5Radio and AC mains lead connections

STEP6Preparing the remote control

STEP7Performing QUICK SETUP

Setup Guide

EB-setup guide.fm Page 1 Friday, March 10, 2006 3:44 PM

[HT540] Front speakers

[HT990] Front and surround speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For assembly, use a Phillips-head screwdriver.

≥Make sure you have all the indicated components before starting assembly, setup, and connection.

≥There is no difference between the right and left speakers and stands.

≥For optional wall mount, refer to page 38, Operations Guide.

[Note]

≥[HT990] The front and surround speakers are different.

– Check the label on the rear of speaker before attaching the stand (➜page 4).

– The stand with shorter cable is for the front speaker.

1Attach the stand to the base.

1Thread the speaker cable through the base.

For quicker threading, loosely fold the cable in half (do

not crease), pass the folded portion through the hole,

and then pull the rest of the cable through the base.

2Attach the stand to the base while gently pulling

on the end of the speaker cable.

2Secure the stand to the base.

3Attach the speaker to the stand.

1Pull out the end of the speaker cable and

position it between the ridges.

STEP1Assembling the speakers

The supplied stands are specially designed

for attachment to Panasonic SB-FS990 front

speakers, SB-FS741 surround speakers,

SB-FS540 front or surround speakers.

Use only as indicated in this setup.

[HT540] 2 Front speakers

(with cover plate)

[HT990] 2 Front speakers and

2 Surround speakers

(with cover plate)

[HT540] 2 Bases

[HT990] 4 Bases

[HT540] 2 Stands (with cable)

[HT990] 4 Stands

≥2kstands with short cable:

For front speakers

≥2kstands with long cable:

For surround speakers

[HT540] 8 Screws

[HT990] 16 Screws

Base

Cable

Stand

Base

Cable

Pull gently.

Screw

Tighten securely.

Slide the speaker

cable into the

groove.

Stand

Base

Screws

Tighten securely.

Cable

Ridges

Stand

EB-setup guide.fm Page 2 Friday, March 10, 2006 11:37 AM

2Attach the speaker to the stand.

4Secure the speaker to the stand.

5Connect the speaker cable.

∫Preventing the speakers from falling

≥You will need to obtain the appropriate screw eyes to

match the walls or pillars to which they are going to

be fastened.

≥Consult a qualified housing contractor concerning the

appropriate procedure when attaching to a concrete

wall or a surface that may not have strong enough

support. Improper attachment may result in damage

to the wall or speakers.

Speaker

Stand

Cover plate

Remove before attaching the

speaker and keep for wall-mount use

(➜page 38, Operations Guide).

Speaker

Stand

Screw

Tighten securely.

Ensure the speaker cable

is centered in the groove.

_: White

`:Blue

Push!

Press the speaker

cable into the groove.

Insert the wire fully.

Assembled!

String (not included)

Thread from the wall to the

speaker and tie tightly.

Rear of the

speaker

Wall

Approx.

150 mm

Screw eye

(not included)

EB-setup guide.fm Page 3 Friday, March 10, 2006 11:37 AM

How you set up your speakers can affect the bass and the sound field. Note the following points:

≥Place speakers on flat secure bases.

≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick

curtains.

≥Left and right speakers are interchangeable, but front and surround speakers are not.

≥Place the front, center, and surround speakers at approximately the same distance from the seating position.

The angles in the diagram are approximate.

≥Use only supplied speakers

Using other speakers can damage the unit, and sound

quality will be negatively affected.

≥Set the speakers up on an even surface to prevent them

from falling. Take proper precautions to prevent the

speakers from falling if you cannot set them up on an

even surface.

Main unit

[Note]

≥Keep your speakers at least 10 mm away from the system

for proper ventilation.

≥To allow for proper ventilation and to maintain good

airflow around the main unit, position it with at least 5 cm

of space on all sides.

≥Do not block the ventilation holes of the main unit.

Center speaker

≥Vibration caused by the center speaker can disrupt the

picture if it is placed directly on the television. Put the

center speaker on a rack or shelf.

≥To prevent the speakers from falling, do not place directly

on top of the television.

Subwoofer

Place to the right or left of the television, on the floor or a

sturdy shelf so that it will not cause vibration. Leave about

30 cm from the television.

Caution

≥Do not stand on the base.

Be cautious when children are

near.

≥Do not touch the netted

area of the speakers.

STEP2Positioning the speakers

Setup example

Main unit

FRONT

(L, R)

SURROUND

(L, R)

CENTER SUBWOOFER

Setup example

Main unit

FRONT

(L, R)

SURROUND

(L, R)

CENTER SUBWOOFER Speaker label

Do not use a front

speaker as a

surround speaker or

vice versa. Verify the

type of speaker with

the label on the rear

of the front speaker.

e.g. Front speaker

e.g. [HT540] Surround speaker

EB-setup guide. fm Page 4 Tuesday, February 28, 2006 9:49 AM

Notes on speaker use

≥You can damage your speakers and shorten their useful

life if you play sound at high levels over extended periods.

≥Reduce the volume in the following cases to avoid

damage:

– When playing distorted sound.

– When the speakers are reverberating due to a record

player, noise from FM broadcasts, or continuous signals

from an oscillator, test disc, or electronic instrument.

– When adjusting the sound quality.

– When turning the unit on or off.

If irregular coloring occurs on your television

The front and center speakers are designed to be used

close to a television, but the picture may be affected with

some televisions and setup combinations.

If this occurs, turn the television off for about

30 minutes.

The demagnetizing function of the television should correct

the problem. If it persists, move the speakers further away

from the television.

Caution

≥The main unit and supplied speakers are to be used

only as indicated in this setup. Failure to do so may

lead to damage to the amplifier and/or the speakers,

and may result in the risk of fire. Consult a qualified

service person if damage has occurred or if you

experience a sudden change in performance.

≥

Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

STEP3Speaker connections

SURROUND

Rch

SURROUND

Rch

FRONT

WOOFER

SUB

Lch

Lch Lch

CENTER

Lch

SURROUND

FRONT

SUB

WOOFER

FRONT

CENTER

FRONT

Lch

Rch

SURROUND

Rch

FRONT

Rch

FRONT

Lch

Rch

SURROUND

CENTER

Lch

SURROUND

Lch

SURROUND

4 4

SUB

WOOFER

Be careful not to cross

(short-circuit) or

reverse the polarity of

the speaker wires as

doing so may damage

the speakers.

2 sheets of speaker cable stickers

≥Attach the speaker-cable stickers to

make connection easier.

Speaker cable sticker

2FRONT (R)

1FRONT (L)

4SURROUND (R)

3SURROUND (L)

5CENTER

Main unit

Insert the wire fully.

i: White

j: Blue

Push!

6SUBWOOFER

Speaker cables

[HT540]

≥1kshort cable: For center speaker

≥2klong cables: For surround speakers

Push!

[HT990]

≥1kshort cable:

For center speaker

Insert the

wire fully.

i: White

j: Blue

EB-setup guide. fm Page 5 Tuesday, February 28, 2006 9:49 A

≥Do not connect through the video cassette recorder.

Due to copy guard protection, the picture may not be displayed properly.

≥Turn the television off before connecting, and refer to the television’s operating instructions.

To improve picture quality, you can change the video signal output from the SCART (AV) terminal.

Select “RGB/No Output” from QUICK SETUP (➜page 10).

≥This connection will also enable you to play audio from your television through your home theater system.

Refer to “Operating other equipment” (➜page 37, Operations Guide).

Connecting to a television with SCART (AV) terminal

STEP4Audio and video connections

INTERLACE)

(PROGRESSIVE/

COMPONENT VIDEO OUT

VIDEO

OUT

S-VIDEO

OUT

AUX

Television

(not included)

Back of the main unit

Sound from the television

Press [EXT-IN] to select the “TV” audio input

on the remote control (➜page 37, Operations

Guide).

Scart cable (not included)

≥To listen to the sound from the

television, select the appropriate audio

out (e.g., Monitor) on the television.

EB-setup guide.fm Page 6 Friday, March 10, 2006 11:53 AM

∫Television with an S-VIDEO IN terminal

The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance

Connecting to a television with AUDIO/VIDEO terminals

Using other video connections for improved picture quality

INTERLACE)

(PROGRESSIVE/

COMPONENT VIDEO OUT

S-VIDEO

OUT

AUX

VIDEO

OUT

AUDIO

OUT

VIDEO IN

AUDIO

VIDEO OUT

§This audio connection will enable you to play audio from your television through your home theater system. Refer to

“Operating other equipment” (➜page 37, Operations Guide).

Television

(not included)

Back of the main unit

Video cable

(not included)

Audio cable §

(not included)

INTERLACE)

(PROGRESSIVE/

COMPONENT VIDEO OUT

VIDEO

OUT

S-VIDEO

OUT

AUX

VIDEO IN

S-VIDEO

Television

(not included)

S-video cable

(not included)

Back of the main unit See above for the audio connection.

EB-setup guide.fm Page 7 Friday, March 10, 2006 11:43 AM

∫Television with COMPONENT VIDEO IN terminals

The COMPONENT VIDEO OUT terminals provides a purer

picture than the S-VIDEO OUT terminal. These terminals

can be used for either interlaced or progressive output.

Connection using these terminals outputs the color

difference signals (PB/PR) and luminance signal (Y)

separately in order to achieve high fidelity in reproducing

colors.

≥The description of the component video input terminals

depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/

R-Y, Y/CB/CR). Connect to terminals of the same color.

≥When making this connection, select “Video/YPbPr” or

“S-Video/YPbPr” from QUICK SETUP (➜page 10). If

“RGB/No Output” is selected, the RGB signal is output

from the SCART (AV) terminal, but no signal is output

from the component video output terminals.

∫Set Top Box or video cassette recorder connection

To enjoy progressive video

≥Connect to a progressive output compatible television.

≥Set “Video Output Mode” to “480p” or “576p”, and then follow the instructions on the menu screen (➜page 26,

Picture Menu, Operations Guide).

≥Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible. Consult

the manufacturer if you have another brand of television.

AUX

INTERLACE)

(PROGRESSIVE/

COMPONENT VIDEO OUT

VIDEO

OUT

S-VIDEO

OUT

VIDEO IN

S-VIDEO

COMPONENT

VIDEO IN

Television

(not included)

Back of the main unit

Video cables

(not included)

See page 7 for the audio connection.

RF IN

RF OUT

RF IN

AUDIO

OUT

VIDEO IN

AUDIO

VIDEO OUT

VIDEO

OUT

S-VIDEO

OUT

INTERLACE)

(PROGRESSIVE/

COMPONENT VIDEO OUT

AUX

Television

(not included)

Video cable

(not included)

Back of the main unit

Audio cable (not included)

≥You can use the scart cable

connection (➜page 6)

instead of this connection.

RF cable

(not included)

Set Top Box or

video cassette recorder

(not included)

To the

aerial

In addition to the audio and video connections, you can also connect your Set Top Box or video cassette recorder.

EB-setup guide.fm Page 8 Saturday, March 11, 2006 8:49 AM

Conserving power

The main unit consumes a small amount of power, even when it is turned off (approx. 0.5 W). To save power when the unit

is not to be used for a long time, unplug it from the household mains socket.

You will need to reset some memory items after plugging in the unit.

[Note]

The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords for

other equipment with this unit.

STEP5Radio and AC mains lead connections

Adhesive tape

To household

mains socket

(AC 230–240 V,

50 Hz)

AC mains lead

Main unit

AM loop antenna

Stand the antenna up on its base.

Place the antenna where reception is best.

Keep loose antenna cable away from other

wires and cables.

Click!

AM loop antenna FM indoor antenna AC mains lead

FM indoor antenna

Affix this end of the antenna

where reception is best.

≥Connect the AC mains lead after all other connections are complete.

≥Using an outdoor antenna (optional) (➜page 33, Operations Guide).

Re-tighten

the terminal

screw.

Loosen the terminal

screw with a Phillips-

head screwdriver.

White

Red

Black

While pushing, insert the wire fully.

BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 IN

OPERATIONS GUIDE BEFORE CONNECTION.

EB-setup guide.fm Page 9 Friday, March 10, 2006 11:43 AM

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage

which can severely damage the remote control.

Remove the batteries if the remote control is not going to

be used for a long period of time. Store in a cool, dark

place.

∫Use

Aim at the remote control signal sensor (➜page 15,

Operations Guide), avoiding obstacles, at a maximum

range of 7 m directly in front of the unit.

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1,

AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜page 37, Operations Guide).

To change these settings later

Select “QUICK SETUP” in the “Others” tab (➜page 30,

Operations Guide).

STEP6Preparing the remote control

R6/LR6, AA

Remote control Batteries

Insert so the poles (iand j) match those in the

remote control.

≥Do not use rechargeable

type batteries.

STEP7Performing QUICK SETUP

ENTER

DVD

SETUP

RETURN

1Turn on the unit.

2Select “DVD/CD”.

3Press and hold to show

the QUICK SETUP screen.

4Follow the messages and

make the settings.

5Press to finish QUICK

SETUP.

6Press and hold to exit.

Select

ENTER

EB-setup guide.fm Page 10 Friday, March 10, 2006 11:43 AM

Otros manuales para SC-HT540

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de cine en casa de Panasonic

Panasonic

Panasonic SCHTB10 - HOME THEATER AUDIO SYSTEM Manual de usuario

Panasonic

Panasonic SC-BT200 Instrucciones de uso

Panasonic

Panasonic SA-HT800VP Manual de usuario

Panasonic

Panasonic SC-HT67 Manual de usuario

Panasonic

Panasonic SC-HT60 Manual de usuario

Panasonic

Panasonic SC-DK2 Manual de usuario

Panasonic

Panasonic SC-RT30 Manual de usuario

Panasonic

Panasonic SCHTB170 Manual de usuario

Panasonic

Panasonic SCHT680 - RECEIVER W/5-DISK DV Manual de usuario

Panasonic

Panasonic SC-BT100 Manual de usuario

Panasonic

Panasonic SA-PT750PL Manual de usuario

Panasonic

Panasonic SC-BTT370 Instrucciones de uso

Panasonic

Panasonic SC-HT1000 Manual de usuario

Panasonic

Panasonic SCHTB500 - HOME THEATER AUDIO SYSTEM Manual de usuario

Panasonic

Panasonic SC-BT100 Manual de usuario

Panasonic

Panasonic SAHT730 - DVD THEATER RECEIVER Guía de inicio rápido

Panasonic

Panasonic SC-BTT190 Manual de usuario

Panasonic

Panasonic GCSEB E Manual de usuario

Panasonic

Panasonic SA-PT460 Manual de usuario

Panasonic

Panasonic SC-BT735 Instrucciones de uso

Panasonic

Panasonic SA-HT855E Manual de usuario

Panasonic

Panasonic SC-HTB770 Manual de usuario

Panasonic

Panasonic SC-XH10 Manual de usuario

Panasonic

Panasonic SC-HT540 Manual de usuario

Manuales populares de Sistema de cine en casa de otras marcas

Samsung

Samsung HT-ES4200K Manual de usuario

Harman Kardon

Harman Kardon HS 100 Manual de usuario

Samsung

Samsung HT-P10 Manual de usuario

Philips

Philips HTS5131 Instrucciones de funcionamiento

Goodmans

Goodmans GDVD19SWS Manual de usuario

Moxi

Moxi media center Manual de usuario

Samsung

Samsung HT-EM35 Manual de usuario

LG HE903PAW Manual de usuario

Bose

Bose SoundTouch 520 Manual de usuario

Sony

Sony BDV-N990W Manual de usuario

Manta

Manta GK-500 Manual de usuario

Sharp

Sharp SBW800 Manual de usuario

Philips

Philips HTS3541 Manual de usuario

LG LHT799 Manual de usuario

Samsung

Samsung HT-TWZ415 Manual de usuario

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Manual de usuario

Samsung

Samsung AH68-02166R Manual de usuario

RCA

RCA 600-Watt Manual de usuario