Panasonic Diga DMR-EZ47 Manual de usuario

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 1 of 8

DMR-EZ47 Firmware Installation Instructions

Table of Contents

Table of Contents ............................................................................................. 1

1Firmware History.............................................................................................. 2

1.1 Applicable Models ........................................................................................ 2

1.2 Purpose...................................................................................................... 2

2Download Firmware ......................................................................................... 3

3Burn Firmware.................................................................................................. 4

3.1 Windows® OS CD Writing Program ................................................................ 4

3.2 Other OS CD Writing Program........................................................................ 5

3.3 3rd Party CD Burning Software ....................................................................... 5

3.4 Dragging & Dropping.................................................................................... 6

4Install Firmware............................................................................................... 7

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 2 of 8

1Firmware History

1.1 Applicable Models

DMR-EZ47, DMR-EZ475

Includes models with suffix K, S, V, VK, VP, or VS

1.2 Purpose

UJ-225

Improved playback DVD+R media which was recorded by SONY DVD Recorder.

Optimization of track jump control for CD-RW.

Improvement of recording quality for DVD-R DL.

UJ-217

Enhances Closed Captioning display.

Enables the unit to the download the New V-Chip/Regional Rating Table (RRT).

UJ-205

Modification to improve VHS Timer Recording.

UJ-201

ATSC level meter indication improvement with weak signal.

Stops disc rotation when the [EJECT] button is pressed.

UJ-196

Countermeasure for occurred aging mode by remote control signal.

Protection against Drive unit fuse blowing due to customer Disc condition.

Improved HDMI function. (Depends on TV)

Upgrade program for next generation drive.

UJ-190

When recording program of 5.1 channel audio, the center channel audio is not output.

The title information of the recorded program is not displayed correctly.

UJ-184

Hang-up sometimes occurs using JPEG of RAM disc on "Direct Navigator".

"Copying has been stopped" message is displayed on the "Status" screen.

"oooooo" is indicated continuously on power off after malfunction occurs.

DVD-Video is played back on indication of "oooooo" after power off using EZ-Sync.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 3 of 8

2Download Firmware

1) Left click on the DOWNLOAD icon for the DMR-EZ47 Firmware.

- DMR-EZ47, DMR-EZ475 DVD Recorder Firmware

2) Left click on SAVE.

3) Left click on DESKTOP, and then left click on SAVE.

NOTE: The PANA_DVD.FRM file will be placed on the DESKTOP.

The file name displayed should be

PANA

DVD.FRM.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 4 of 8

3Burn Firmware

Use one of the below procedures to burn firmware to a CD-R disc.

3.1 Windows®OS CD Writing Program

1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer.

2) If the below (or similar) screen appears (Windows XP), left click on CANCEL.

3) Right click on the PANA_DVD.FRM file on the DESKTOP, mouse over SEND TO, and

then left click on the CD BURNER DRIVE.

4) If the below screen appears, left click on YES.

NOTE: The below screen may appear momentarily.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 5 of 8

5) Lift click on the YOU HAVE FILES WAITING TO BE WRITTEN TO THE CD icon in the

SYSTEM TRAY.

6) Left click on WRITE THESE FILES TO CD.

7) Type a name for the CD, check the CLOSE THE WIZARD AFTER THE FILES HAVE

BEEN WRITTEN check box, and then left click on NEXT.

NOTE: The below screen will appear during the burning process.

8) After the PANA_DVD.FRM file has been burned to the CD, the disc should automatically

eject from the CD Burner Drive. If it doesn’t, manually eject the disc.

3.2 Other OS CD Writing Program

Refer to the computer’s owner’s manual or HELP files for instructions on how to copy the

PANA_DVD.FRM to a CD-R using the ISO-9660 format.

3.3 3rd Party CD Burning Software

Refer to the software application’s owner’s manual or HELP files for instructions on how to

copy the PANA_DVD.FRM to a CD-R using the ISO-9660 format.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 6 of 8

3.4 Dragging & Dropping

If an icon for the CD Burner Drive has been placed on the DESKTOP, left click on the

firmware file, hold the left mouse button down, drag the file to the CD Burner Drive icon and

release the left mouse button.

If using the Windows XP operating system, use procedure from STEP 5 of SECTION 3.1 on

PAGE 5 of 8.

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 7 of 8

4Install Firmware

CAUTION: Do not turn the DVD Recorder OFF or press any buttons on the DVD

Recorder while the firmware update is in progress.

1) Power the DVD Recorder on.

2) Press the [OPEN/CLOSE] button to OPEN the disc tray.

3) Place the CD-R with the firmware update into the disc tray with the label side facing up.

4) Press the [OPEN/CLOSE] button to CLOSE the disc tray.

NOTE: If the firmware version in the unit is the same or higher than the firmware

CD, UNSUPPORT may be displayed on the front panel. In this case, an update is

unnecessary. Please remove the disc.

NOTE: If the firmware update will be installed, BYE will display on the front panel,

the DVD Recorder will power off, and then power back on.

NOTES:

Several messages will be displayed on the front panel during the firmware

update.

When the firmware update is complete, the disc tray will automatically OPEN.

5) Remove the CD-R with the firmware update from the disc tray.

6) Without closing the disc tray, press the [POWER] button on the DVD Recorder to power

the unit off. The disc tray will CLOSE automatically, display BYE,and then power off.

7) Unplug the power cord for at least 30 seconds, and then plug the power cord back in.

8) Press the [POWER] button on the DVD Recorder to power the unit on. (The unit will

display HELLO and then begin the FIRST TIME SETUP.)

NOTE: If the unit does not begin the FIRST TIME SETUP automatically, it is

recommended to initiate the FIRST TIME SETUP.

Tune the DVD Recorder to a channel.

Simultaneously press the [CHANNEL UP] and [CHANNEL DOWN] buttons on the

front of the DVD Recorder for approximately 10 – 15 seconds (until the unit powers

off).

DMR-EZ47 DVD Recorder Firmware Installation Instructions

Page 8 of 8

When the DVD Recorder is powered back on, the FIRST TIME SETUP screen should

be displayed.

9) Follow the on-screen prompts to complete the FIRST TIME SETUP.

Otros manuales para Diga DMR-EZ47

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Grabadora de DVD de Panasonic

Panasonic

Panasonic Diga DMR-EX80S Manual de usuario

Panasonic

Panasonic DMR-E60S Manual de uso y cuidado

Panasonic

Panasonic Diga DMR-EH59EM Manual de usuario

Panasonic

Panasonic DIGA DMR-XS350EB Manual de usuario

Panasonic

Panasonic Diga DMR-ES20 Manual de usuario

Panasonic

Panasonic Diga DMR-XW390 Manual de usuario

Panasonic

Panasonic DMR-XS350 Manual de usuario

Panasonic

Panasonic DMR-EH50EB Manual de usuario

Panasonic

Panasonic DMR-EH75VP Manual de usuario

Panasonic

Panasonic Diga DMR-ES30V Manual de usuario

Panasonic

Panasonic Diga DMR-EZ49V Manual de usuario

Panasonic

Panasonic DMR-EX97C Manual de usuario

Panasonic

Panasonic Diga DMR-EX75EB Manual de usuario

Panasonic

Panasonic Diga DMR-EX78 Manual de usuario

Panasonic

Panasonic WJ-HD616G Manual de usuario

Panasonic

Panasonic DMR-EX75 Manual de usuario

Panasonic

Panasonic Diga DMR-ES10EB Manual de usuario

Panasonic

Panasonic DMR-EA18K Manual de usuario

Panasonic

Panasonic Diga DMR-EX77 Manual de usuario

Panasonic

Panasonic DMR-ES30VEB Manual de usuario

Panasonic

Panasonic Diga DMR-EX83 Manual de usuario

Panasonic

Panasonic DMR-EH56 Manual de usuario

Panasonic

Panasonic DMR-EH57GN Manual de usuario

Panasonic

Panasonic Diga DMR-EZ45VEBS Manual de usuario

Manuales populares de Grabadora de DVD de otras marcas

Pioneer

Pioneer DVR-65H-S Guía de configuración

Sony

Sony RDR-VX525 - DVDr/ VCR Combo Manual de usuario

Daewoo

Daewoo DHD-4000D Manual de usuario

Medion

Medion MD 40570 Manual de usuario

Philips

Philips ShowView DVDR3460H Manual de usuario

Sony

Sony RDR-GX355 - Tunerless DVD Recorder Manual de usuario

Sony

Sony DVDirect VRD-MC3 Manual de usuario

Samsung

Samsung DVD-R130/XAA Manual de usuario

FUNAI

FUNAI HD-B2735 Manual de usuario

Pioneer

Pioneer PRV-LX1 Manual técnico

Sanyo

Sanyo DRW-1000 Manual de usuario

Philips

Philips DVDR610/05 Manual de usuario

JVC

JVC DR-M10 Manual de usuario

Samsung

Samsung SV-DVD40 Manual de usuario

Philips

Philips DVDR3355 Manual de usuario

FUNAI

FUNAI FDR-90E Manual de usuario

LG RC298 Manual de usuario

Samsung

Samsung DVD-R130 Manual de usuario