Panasonic KX-TG9381 Manual de usuario

PNQW1812YA DM0609SH1079Printed in Malaysia

Setting up

If you subscribe to a DSL/ADSL service, attach a DSL/ADSL filter to the telephone line between the base

unit and the telephone line jack. Refer to the operating instructions for connections.

Connecting the AC adaptor

LUse only the supplied Panasonic AC adaptor PQLV219.

(120 V AC, 60 Hz)

Hook

Press plug firmly.

Base

unit

Base

unit

Correct

Wrong

Connecting the telephone line cord

NTo connect to a 2-line telephone jack

NTo connect to 2 single-line telephone jacks

“GREEN” plug 4-wire cord

To 2-line telephone jack (RJ14C)

4-wire cord

Line 2

Line 1

2-wire cord

To single-line

telephone jacks (RJ11C)

“GREEN” plug

“Transparent” plug

“Click”

USE ONLY a 4-wire

telephone line cord.

“Click”

Model No. KX-TG9381

KX-TG9382

Quick Guide

TG938x_QG(e).fm Page 1 Wednesday, July 1, 2009 3:22 PM

– 2 –

For further information, visit http://www.panasonic.com/help or refer to operating instructions.

Setting up

CHARGE FOR

ABOUT 7 HOURS

Handset

Charger

Answering system (Base unit)

Using the unit as a single-line telephone only

(120 V AC,

60 Hz)

LUse only the supplied

Panasonic AC adaptor

PQLV219.

Rechargeable Ni-MH ONLY

LUSE ONLY Ni-MH batteries AAA (R03) size.

LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

LConfirm correct polarities (S, T).

Confirm “Charging”

is displayed.

Selecting the desired line(s) and turning the answering system on

1Press {ANSWER SELECT}repeatedly to select the line(s) to

receive calls using the answering system.

LThe base unit displays the selected line(s) ( , , or 8).

2Press {ANSWER ON}.

LThe ANSWER ON indicator lights up.

Recording your own greeting message (optional)

Note: If you use a pre-recorded greeting message, you do not need to record your own greeting

message.

Connect the telephone line cord to LINE 1/2.

Handset/Base unit:

Program this setting using either one of the handsets or

the base unit.

LTo use line 1 only: {MENU}i{#}{2}{5}{0}i

{V}/{^}: “Line 1”i{SAVE}i{OFF}/{■}

LTo erase the message “Check tel line 2”:

{MENU}i{#}{1}{9}{0}

1{MENU}i{#}{3}{0}{2}i{V}/{^}: Select the desired line(s). i{SELECT}

2After the base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC.

3Press {STOP}(soft key) to stop recording. i{■}

{ANSWER SELECT}

ANSWER ON

indicator

{ANSWER ON}

INE

Use the telephone line

cord with “Transparent”

plug (2-wire cord).

TG938x_QG(e).fm Page 2 Wednesday, July 1, 2009 3:22 PM

– 3 –

Operating tips

Navigator key/Volume key (?, VOL.)

NScrolling through lists or items

By pressing this key ({^} or {V}) repeatedly, you can scroll

through (up or down) various lists or items.

NAdjusting the volume

By pressing this key ({^} or {V}) repeatedly, you can adjust

the receiver or speaker volume (up or down) while talking.

NMoving the cursor

Handset: {^}, {V}, {<}, or {>}

Base unit: {^}, {V}, {7}, or {8}

By pressing the above keys repeatedly, you can move the

cursor to edit a number or name.

NRepeating/skipping the messages

Handset: {<}or {>}

Base unit: {7}or {8}

By pressing the above keys, you can repeat/skip messages

during playback.

Soft keys

Each unit features 3 soft keys. By pressing a soft key, you can

select the feature shown directly above it on the display.

{C}, {MENU}, {CID}, and other additional functions are

assigned to the soft keys. Pay attention to the display to see

what functions the soft keys are assigned during operation.

Handset

Base unit

Message indicator/{>}(Play) button on the

base unit

When new messages have been recorded, the message

indicator flashes.

To listen to messages, press {>}.

Date and time (Handset/Base unit)

Program this setting using either one of the handsets or the base unit.

1{MENU}i{#}{1}{0}{1}

2Enter the current month, date, and year.

3Enter the current hour and minute (12-hour clock format).

4Press {*} to select “AM” or “PM”. i{SAVE}

5Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■}

For further information, visit http://www.panasonic.com/help or refer to operating instructions.

7 8

Handset Base unit

{V}

{^}

{<}{>}

Base unit

Message indicator

(Play) button

{>}

TG938x_QG(e).fm Page 3 Wednesday, July 1, 2009 3:22 PM

– 4 –

Basic operations

Phonebook (Handset/Base unit)

Adding entries 1Proceed with the operation for your unit.

Handset: {MENU}i{#}{2}{8}{0}

Base unit: {C}

2{ADD}iEnter the party’s name (16 characters max.). i{OK}

3Enter the party’s phone number (24 digits max.). i{OK}

4{V}/{^}: Select the desired group. i{SELECT}2 times

5Proceed with the operation for your unit.

Handset: {OFF}

Base unit: {■}

LTo enter a name, see the character table in the operating instructions.

Making calls 1Proceed with the operation for your unit.

Handset: {MENU}i{#}{2}{8}{0}

Base unit: {C}

2{V}/{^}: Select the desired entry.

3Proceed with the operation for your unit.

Handset: {C}

Base unit: {SP-PHONE}

For further information, visit http://www.panasonic.com/help or refer to operating instructions.

TG938x_QG(e).fm Page 4 Wednesday, July 1, 2009 3:22 PM

– 5 –

Using Bluetooth®devices (Base unit only)

Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer)

You can copy phonebook entries from your cellular phone to the base unit. Once you have copied

phonebook entries to the base unit, you can copy those entries to the handset.

Copying phonebook entries from a Bluetooth

cellular phone to the base unit

1Base unit: {MENU}i{#}{6}{1}{8}

L“Please transfer phonebook data from cell

phone.”is displayed.

2Your cellular phone:

Follow the instructions of your cellular phone to copy phonebook

entries. (You need to search for and select the base unit on your

cellular phone.)

LThe base unit’s PIN may be required (default: “0000”).

LWhen entries have been copied, “Completed”is displayed on

the base unit.

3Base unit: {■}

Copying phonebook entries from the base unit to

the handset

Base unit:

1{C}i{MENU}

2{V}/{^}: “Copy all to HS”i{SELECT}

3Enter the handset number you want to copy to.

LWhen all entries have been copied, “Completed”is displayed.

4{■}

LYou can also copy a single entry or multi entries by selecting from

the phonebook. See the operating instructions for further details.

Using a Bluetooth wireless headset (optional)

By registering a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly.

Registering a headset

1Your headset:

Set your headset to registration mode.

LRefer to your headset operating instructions.

2Base unit:

{MENU}i{#}{6}{2}{3}i{V}/{^}: “Add new device” i

{SELECT}

3Base unit:

Enter your headset PIN.

LTypically, default PIN is “0000”. Refer to your headset operating instructions.

4Base unit: {OK}

LWhen registration is complete, ]is displayed. You are ready to use the headset.

TG938x_QG(e).fm Page 5 Wednesday, July 1, 2009 3:22 PM

– 6 –

Trademarks

LThe Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by

Panasonic Corporation is under license. Other trademarks and trade names are those of their respective

owners.

Using a Bluetooth wireless headset (optional)

Operating a Bluetooth wireless headset

NMaking calls

After dialing the phone number using the base unit, you can operate the call with your headset.

Refer to your headset operating instructions for further details.

NAnswering calls

Refer to your headset operating instructions for further details.

NSwitching a call between the headset and base unit speakerphone

To switch to the base unit speakerphone, press {s}.

To return to the headset, press {W}.

NAdjusting the receiver volume

Press {^} or {V} repeatedly while talking on the headset.

LTo adjust the volume using the headset, refer to your headset operating instructions.

Quick troubleshooting

Using Bluetooth®devices (Base unit only)

“No link to base. Reconnect AC adaptor.”

Handset shows:

Place the handset on the base unit, then check if “Charging”is

displayed.

“Charging”is not displayed. “Charging”is

displayed.

Unplug and then plug AC adaptor properly to

both the base unit and AC outlet.

Unplug the AC adaptor of the base unit and remove the batteries from the

handset, then plug in the AC adaptor and insert the batteries into the handset

again. Try to re-register the handset.

Lift the handset, then try again.

If handset still shows the same message, try to

re-register the handset.

“Charging”is

still not displayed.

Re-registration failed.

“Charging”is

displayed, now.

Your telephone may need service.

Please visit http://www.panasonic.com/help for further troubleshooting.

TG938x_QG(e).fm Page 6 Wednesday, July 1, 2009 3:22 PM

– 7 –

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to

the base unit, register the handset.

{MENU}i{#}{1}{3}{0}

Press and hold {LOCATOR}for 5 seconds until the

registration tone sounds.

LThe next step should be completed within 90

seconds.

Press {OK}, then wait until a long beep sounds.

For further registration information, visit

http://www.panasonic.com/RegisterYourHandset

Handset

LINE1 LINE2MENU

{MENU}

Base unit

{LOCATOR}

Handset

BACK OK

Press LOCATOR

on base for 5sec

Then press OK

{OK}

TG938x_QG(e).fm Page 7 Wednesday, July 1, 2009 3:22 PM

– 8 –

IMPORTANT!

If your product is not working properly ...

1Reconnect AC adaptor to the base unit.

Read FAQ in this Quick Guide and

troubleshooting page in the Operating Instructions.

Check if telephone line cord is connected.

Use rechargeable Ni-MH batteries.

(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)

Visit our Web site: http://www.panasonic.com/help

LOperating Instructions downloading, FAQ,

and troubleshooting hints are available.

TG938x_QG(e).fm Page 8 Wednesday, July 1, 2009 3:22 PM

Otros manuales para KX-TG9381

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de Panasonic

Panasonic

Panasonic KX-TG4733B Manual de usuario

Panasonic

Panasonic KX-TCD150FXB Manual de usuario

Panasonic

Panasonic KX-TG1233JXS Manual de usuario

Panasonic

Panasonic VB44210A - BUSINESS TELEPHONE Manual de usuario

Panasonic

Panasonic KX-TG2553CS Manual de usuario

Panasonic

Panasonic KX-TC1723B Manual de usuario

Panasonic

Panasonic KX-TG7200HK Manual de usuario

Panasonic

Panasonic KX-T4109-B Manual de usuario

Panasonic

Panasonic KX-TG6021 Manual de usuario

Panasonic

Panasonic KX-TG2650N Manual de usuario

Panasonic

Panasonic KX-TG2622 Manual de usuario

Panasonic

Panasonic KX-TCD210E Manual de usuario

Panasonic

Panasonic KX-TG5771C Manual de usuario

Panasonic

Panasonic KX-TPA50 B08 Manual de usuario

Panasonic

Panasonic GLOBARANGE BB-GT1500E Manual de usuario

Panasonic

Panasonic KX-TCD410AXM Manual de usuario

Panasonic

Panasonic HD Link2Cell KX-TG885SK Manual de usuario

Panasonic

Panasonic KXTGA550 - 1.6" MONO HS Manual de usuario

Panasonic

Panasonic 900 MHz Manual de usuario

Panasonic

Panasonic VE-SV03 Manual de usuario

Panasonic

Panasonic KX-TC900-B Manual de usuario

Panasonic

Panasonic KX-TG7341FX Manual de usuario

Panasonic

Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless... Manual de usuario

Panasonic

Panasonic KX-TGD610 Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración

AT&T

AT&T 7625 Manual de usuario

GE 27930 Manual de usuario

Radio Shack

Radio Shack 43-3557 Manual de usuario

Uniden

Uniden D1785 Series Manual de usuario