Panasonic KX-TG7882AZ Guía de instalación

Frequently asked questions

Telephone

Question Cause/solution

What should I do when noise is

heard, sound cuts in and out?

LYou are using the handset or base unit in an area with

high electrical interference. Re-position the base unit and

use the handset away from sources of interference.

LMove closer to the base unit.

LIf you use a DSL/ADSL service, we recommend

connecting a filter (contact your DSL/ADSL service

provider) to the telephone line between the base unit and

the telephone line socket. Contact your DSL/ADSL

provider for details.

Why is there no dial tone?

(cellular line)

LMake sure that the CELL 1 or CELL 2 indicator lights up

and the cellular phone is connected to the base unit.

LThe cellular phone has not been paired to the base unit.

Pair the cellular phone.

Call waiting (using the recall button)

Question Cause/solution

How do I answer the 2nd call

when I am talking with someone?

How can I use the call waiting

service?

LPress

{

CALL WAIT

}

, and then 2while on the 1st call,

this will switch to the 2nd call, press

{

CALL WAIT

}

and

then 2again to alternate between calls or return to 1st

call, or press

{

CALL WAIT

}

and then 1to terminate the

current call.

LCall waiting is a service provided by your service

provider/telephone company. For additional information

on the use of this service, contact your service provider/

telephone company.

Model No.

KX-TG7882AZ/KX-TG7883AZ

KX-TG7892AZ/KX-TG7893AZ

LConnect the AC adaptor and telephone line cord and charge the batteries for about 7 hours before

initial use.

LPlease read this FAQ’s Guide before using the unit and save for future reference.

FAQ’s Guide (for Australia)

TG788xAZ(en)_FAQ.fm Page 1 Wednesday, January 20, 2016 6:44 PM

– 2 –

Call waiting (using the recall button)

Question Cause/solution

How can I make a conference

call?

To make an internal conference call:

Handset:

1During an outside call, press

{

MENU}to put the call on

hold.

{

}

: “Intercom”

{

SELECT

}

{

}

: Select the desired unit.

{

SELECT

}

4Wait for the paged party to answer.

{

MENU}

{

}

: “Conf.”

{

SELECT

}

Base unit:

1During an outside call, press

{

INTERCOM

}

and the

handset number you desire to join the outside call.

2Wait for the paged party to answer.

3Press

{

CONF

}

To make an external conference call:

LIf you subscribe to external conference call service

provided by your service provider/telephone company,

please contact your service provider/telephone company

for full instructions on this feature. An example of this

feature is as follows: While on an external call, press

{

CALL WAIT

}

, then dial the phone number of the other

person that you desire to join the outside call. When the

2nd called party answers, press

{

CALL WAIT

}

then

activate the conference call.

Why call waiting does not work

when I press

{

CALL WAIT

}

LYou may be required to change the recall time to “90

ms”. (Default: “100 ms”)

LMake sure you have subscribed to the call waiting

service. Contact your service provider/telephone

company.

Battery charge

Question Cause/solution

How do I charge the batteries? LMake sure that the batteries are properly installed in the

handset and the cover is closed. Place the handset on

the base unit or charger. While charging, “Charging”is

displayed.

LIt takes about 7 hours to charge the empty batteries.

When the batteries are fully charged, “Fully

charged”is displayed.

Can I leave the handset on the

base unit or charger after

batteries are fully charged or

each call is finished?

LYou can place the handset on the base unit or charger

anytime. Batteries are not overcharged and there is no

damage to the batteries. By placing the handset on the

base unit or charger, it is always fully charged.

Where can I buy new batteries? LBatteries can be purchased through your local retailer.

TG788xAZ(en)_FAQ.fm Page 2 Wednesday, January 20, 2016 6:44 PM

– 3 –

Range/Distance (No link to base)

Question Cause/solution

What is the range/distance of my

cordless phone? (Why am I

getting short or poor range/

distance on my cordless phone?)

Why is _displayed?

LRange/distance is related to technology and

environmental factors. Therefore we cannot provide a

given range or distance.

LMake sure that the AC adaptor is properly connected to

the wall socket and to the base unit and make sure that

beep tones on the handset sound when you press

{

LOCATOR

}

on the base unit.

LMove closer to the base unit (Allow up to 90 seconds for

the handset to reassign to the base unit.).

LIf you try the manual registration process, allow up to 90

seconds for the handset to reassign to the base unit.

LIf the above remedies do not solve the problem, refer to

the troubleshooting section in the Operating Instructions

for more information.

DSL/ADSL Issues (Noise on line)

Question Cause/solution

Why am I getting noise on my

telephone line?

LIf you subscribe to DSL/ADSL service, we recommend

you to attach a DSL/ADSL filter to the telephone line

between the base unit and the telephone line socket.

Contact your DSL/ADSL service provider or purchase a

DSL/ADSL filter from a retailer or store. Refer to the

troubleshooting section for further details.

LIf you do not subscribe to DSL/ADSL service, there may

be an environmental issue that is causing the

interference (noise). Move closer to the base unit and

check whether there is noise. If there is no noise, some

environmental interference has caused the noise.

LIf there is noise intermittently, there is a possibility of

environmental interference. Refer to the troubleshooting

section for further details.

Caller ID

Question Cause/solution

What should I do to display caller

information?

LYou must subscribe to a Caller ID service. Contact your

service provider/telephone company for details.

TG788xAZ(en)_FAQ.fm Page 3 Wednesday, January 20, 2016 6:44 PM

– 4 –

Registration

Question Cause/solution

How can I register a handset to

the base unit?

LMake sure that you follow registration procedure in the

Operating Instructions:

– you are using the supplied handset that came with the

kit or the optional handset listed below.

– the AC adaptor is connected to the base unit.

– the handset is charged and not placed on the base unit

or charger.

– note the location of

{

LOCATOR

}

button on the base

unit as this is used to start the registration process and

is required to be pressed and held for about 5 seconds.

Why am I unable pair a cellular

phone to the base unit?

LDepending on the compatibility of the cellular phone, you

may not be able to pair it to the base unit.

LConfirm that the Bluetooth®feature of your cellular

phone is turned on. You may need to turn this feature on

depending on your cellular phone.

Which handsets can I buy to use

with this model?

LThe optional handset is KX-TGA680AZ.

Trademarks

LThe Bluetooth®word mark and logos are registered trademarks ownded by Bluetooth SIG,

Inc., and any use of such marks by Panasonic Corporation is under license.

LAll other trademarks identified herein are the property of their respective owners.

TG788xAZ(en)_FAQ.fm Page 4 Wednesday, January 20, 2016 6:44 PM

IMPORTANT!

If your product is not

working properly. . .

1Read the Operating Instructions or

this FAQ’s Guide.

2Visit our website:

www.panasonic.com/au

3Contact us via the web at:

www.panasonic.com/au/support

4Contact our customer care centre on:

Tel.: 132600

Replacement batteries can be purchased

from your retailer.

TG788xAZ(en)_FAQ.fm Page 6 Wednesday, January 20, 2016 6:44 PM

Este manual sirve para los siguientes modelos

Otros manuales de Teléfono inalámbrico de Panasonic

Panasonic

Panasonic KX-TD7690C Manual de usuario

Panasonic

Panasonic KX-TG4012C Manual de usuario

Panasonic

Panasonic KX-TCD410SLS Manual de usuario

Panasonic

Panasonic KX-TG2511HG Manual de usuario

Panasonic

Panasonic KX-TGE274S Manual de usuario

Panasonic

Panasonic KX-TG1034B Manual de usuario

Panasonic

Panasonic KX-TGA820E Manual de usuario

Panasonic

Panasonic KX-TCD200HK Manual de usuario

Panasonic

Panasonic KX-TGP600 Manual de servicio

Panasonic

Panasonic KX-TCD200FX Manual de usuario

Panasonic

Panasonic KX-TCD210E Manual de usuario

Panasonic

Panasonic KX-TG2421 Manual de usuario

Panasonic

Panasonic KX-TCD950E-B Manual de usuario

Panasonic

Panasonic KX-TG3833 Manual de usuario

Panasonic

Panasonic KX-TCD952EB Manual de usuario

Panasonic

Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless... Manual de usuario

Panasonic

Panasonic KX-TG1611 Manual de usuario

Panasonic

Panasonic KX-TCD505NL Manual de usuario

Panasonic

Panasonic KX-TG2338BXS Manual de usuario

Panasonic

Panasonic KX-TG7122SK Manual de usuario

Panasonic

Panasonic KX-TG2120 Manual de usuario

Panasonic

Panasonic KX-TCD300FXS Manual de usuario

Panasonic

Panasonic KX-T4046NZ Manual de usuario

Panasonic

Panasonic KX-TCD200E Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración

AT&T

AT&T 7625 Manual de usuario

GE 27930 Manual de usuario

Radio Shack

Radio Shack 43-3557 Manual de usuario

Uniden

Uniden D1785 Series Manual de usuario