Panasonic KX-TG7732S Manual de usuario

PNQW3019ZA TT1111MG0 (D)

Printed in China

Setting up

Base unit

LUse only the supplied Panasonic AC adaptor PNLV226.

Handset

LUSE ONLY Ni-MH batteries AAA (R03) size.

LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

LConfirm correct polarities (S, T).

Charger

LUse only the supplied

Panasonic AC adaptor

PNLV226.

CHARGE FOR

ABOUT 7 HOURS

To power outlet

Press plug

firmly.

Hook

DSL/ADSL filter*

To single-line

telephone jack

(RJ11C) “Click”

“Click”

Correct Incorrect

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

To power outlet

Rechargeable Ni-MH ONLY

Confirm

“Charging”is

displayed.

Model No. KX-TG7731/KX-TG7732

KX-TG7733/KX-TG254SK

KX-TG7741/KX-TG7742

KX-TG7743/KX-TG7745

Quick Guide

TG77xx_(en)_QG.fm Page 1 Tuesday, November 22, 2011 9:34 AM

– 2 –

Operating tips

Soft keys

The handset features 3 soft keys. By pressing a soft key,

you can select the feature shown directly above it on the

display.

{C}, {MENU}, {CELL}, and other additional functions

are assigned to soft keys. Pay attention to the display to

see what functions the soft keys are assigned during

handset operation.

Volume key

Press {+} or {-} repeatedly to adjust the receiver or

speaker volume while talking.

Navigator key

−{^}, {V}, {<}, or {>}: Scroll through various lists and

items.

−{<}CID (Caller ID): View the caller list.

−{>}REDIAL: View the redial list.

Date and time (Handset)

1{MENU}(1)1

2Enter the current month, date, and year. s{OK}

3Enter the current hour and minute (12-hour clock format).

4{AM/PM}: Select “AM”or “PM”. s{SAVE}s{OFF}

Recording your greeting message for the answering system

for the landline (Handset)

If you use a pre-recorded greeting message, you do not need to record your own greeting

message.

1{MENU}(3)2s{r}: “Yes”s{SELECT}

2After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into

the microphone (2 minutes max.).

3Press {STOP}to stop recording. s{OFF}

FLASH /

CALLWAIT

SP-PHONE

CID

REDIAL

VOL.

{V}

{^}

{<}{>}

TG77xx_(en)_QG.fm Page 2 Tuesday, November 22, 2011 9:34 AM

– 3 –

Link to cell

You can use the unit to make or answer calls using a cellular line. Your cellular phones must have

Bluetooth®wireless technology that is compatible with this product. For more details, please visit

our Web site: http://www.panasonic.com/link2cell

LLocate your cellular phone near the base unit. If the cellular phone is too close to the base unit

during a cellular call, you may hear noise. For best performance, we recommend placing the

cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.

Registering a Bluetooth cellular phone

1Handset:

For CELL 1: {MENU}(6241

For CELL 2: {MENU}(6242

LAfter the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the

procedure must be completed within 5 minutes.

2Your cellular phone:

While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular

phone to enter the registration mode.

LDepending on your cellular phone, it may ask you to enter the base unit PIN (default:

“0000”).

3Handset:

Wait until a long beep sounds.

LIt may take more than 10 seconds to complete registration.

LWhen the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the

base unit. You are ready to make cellular calls.

4To select which unit receives calls for the cellular line (default: “All”):

{OK}s{r}: Select the desired handset or “All”. s{SAVE}

LIf not required, go to step 5.

5{OFF}

Note:

LMake sure that your cellular phone is set to connect to this product automatically. Refer to your

cellular phone’s operating instructions.

Trademarks

LThe Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such

marks by Panasonic Corporation is under license. All other trademarks identified herein are

the property of their respective owners.

Cell line

Cell phone

service providers

TG77xx_(en)_QG.fm Page 3 Tuesday, November 22, 2011 9:34 AM

– 4 –

Link to cell

Base unit: CELL 1/CELL 2 indicators

Status Meaning

Green (On) A cellular phone is connected. Ready to make/receive cellular

calls.

Green (Flashing) The cellular line is in use.

Phonebook entries are being copied from a cellular phone.

Green

(Flashing rapidly)

A cellular call is being received.

Amber (On) A cellular phone is not connected to the base unit.

Amber

(Flashing rapidly)

The base unit is searching for the registered cellular phone.

Red (Flashing) A cellular call is put on hold.

Light off A cellular phone is not registered to the base unit.

Handset: Link to cell display items

tA cellular line is in use.

LWhen flashing: The cellular call is put on hold.

LWhen flashing rapidly: A cellular call is being received.

A cellular phone is connected.*1 Ready to make/receive cellular calls.

LWhen turned off: A cellular phone is not connected to the base unit.

*1 Corresponding cellular line(s) is indicated next to the item.

uv A cellular call is being received on that line.

Connecting/disconnecting the cellular phone

Auto connection to the cellular phone

The unit connects to the cellular phone at regular intervals if the connection is lost. To change the

interval (default: “1 min”), see the operating instructions.

LWhen you are using a cellular line or a Bluetooth headset, the base unit loses its connection

from other Bluetooth devices (cellular phone or headset). To automatically resume the

connection to cellular phones, leave the auto connection on.

Connecting/disconnecting the cellular phone manually

When you make or answer calls with your cellular phone, we recommend disconnecting it from

the base unit, otherwise received audio may not be heard on your cellular phone.

You can also manually reconnect the cellular phone to the base unit without waiting for the auto

connection feature to resume the connection.

1To connect/disconnect:

For CELL 1: {MENU}(6251 (A long beep sounds.)

For CELL 2: {MENU}(6252 (A long beep sounds.)

2{OFF}

TG77xx_(en)_QG.fm Page 4 Tuesday, November 22, 2011 9:34 AM

– 5 –

Link to cell

Cellular line only mode (If you do not use the landline)

If you do not use the landline, set the cellular line only mode to use this unit more conveniently.

1{MENU}(157

2To turn on:

{r}: “On”s{SELECT}s{r}: “Yes”s{SELECT}

To turn off:

{r}: “Off”s{SELECT}

Basic operations

Making/Answering calls (Handset)

Making cellular calls 1Dial the phone number. s{CELL}

LWhen the cellular line only mode is set, you can also press

{C}/{s} instead of {CELL}.

LWhen only 1 cellular phone is registered, the unit starts

dialing.

2When 2 cellular phones are registered:

{r}: Select the desired cellular phone. s{SELECT}

Making landline calls Dial the phone number. s{C}/{s}

Answering calls {C}/{s}

To hang up {OFF}

To adjust the receiver or

speaker volume

Press {+} or {-} repeatedly while talking.

Making a call using the

redial list

1{>}REDIAL s{r}: Select the desired phone number.

2To make a cellular call:

When only 1 cellular phone is registered: {CELL}

When 2 cellular phones are registered:

{CELL}s{r}: Select the desired cellular phone. s

{SELECT}

To make a landline call:

{C}

TG77xx_(en)_QG.fm Page 5 Tuesday, November 22, 2011 9:34 AM

– 6 –

Basic operations

Making/Answering calls (Base unit: KX-TG7741 series)

Making cellular calls {CELL 1}/{CELL 2}sDial the phone number.

LWhen the cellular line only mode is set, you can also press

{SP-PHONE}instead of {CELL 1}/{CELL 2}.

Making landline calls {SP-PHONE}sDial the phone number.

Answering calls {SP-PHONE}

To hang up {SP-PHONE}

To adjust the speaker

volume

Press {+} or {-} repeatedly while talking.

Redialing the last number

dialed

1To make a cellular call: {CELL 1}/{CELL 2}

To make a landline call: {SP-PHONE}

2{REDIAL}

Adjusting the ringer volume (Handset)

To adjust the handset ringer

volume (cellular line)

1For CELL 1: {MENU}(6281

For CELL 2: {MENU}(6282

2{r}: Select the desired volume. s{SAVE}s{OFF}

To adjust the handset ringer

volume (landline)

1{MENU}(16)

2{r}: Select the desired volume. s{SAVE}s{OFF}

To adjust the base unit

ringer volume (cellular line)

1For CELL 1: {MENU}(*6281

For CELL 2: {MENU}(*6282

2{r}: Select the desired volume. s{SAVE}s{OFF}

To adjust the base unit

ringer volume (landline)

1{MENU}(*16)

2{r}: Select the desired volume. s{SAVE}s{OFF}

TG77xx_(en)_QG.fm Page 6 Tuesday, November 22, 2011 9:34 AM

– 7 –

Basic operations

Shared phonebook (Handset)

Adding entries 1{C}s{ADD}

2Enter the party’s name (16 characters max.). s{OK}

3Enter the party’s phone number (24 digits max.). s{OK}

4{r}: Select the desired group. s{SELECT}2 times s

{OFF}

Making calls 1{C}s{r}: Select the desired entry.

2To make a cellular call:

When only 1 cellular phone is registered: {CELL}

When 2 cellular phones are registered:

{CELL}s{r}: Select the desired cellular phone. s

{SELECT}

To make a landline call:

{C}

Answering system for the landline (Base unit)

Answering on/off Press {ANSWER ON/OFF}to turn on/off the answering system.

Listening to messages {6}(PLAY)

Answering system for the landline (Handset)

Listening to messages To listen to new messages:

{MENU}(323

To listen to all messages:

{MENU}(324

TG77xx_(en)_QG.fm Page 7 Tuesday, November 22, 2011 9:34 AM

– 8 –

Using Bluetooth devices

Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer)

You can copy phonebook entries from the registered cellular phones or other cellular phones (not

registered) to the unit’s shared phonebook.

1Handset: {MENU}(618

2Handset:

To copy from registered cellular phones:

{r}: Select the desired cellular phone. s{SELECT}

LCopied items are stored to the group (“Cell 1”or “Cell 2”) which the cellular phone is

registered to.

To copy from other cellular phones (not registered):

{r}: “Other cell”s{SELECT}s{r}: Select the group you want to copy to. s

{SELECT}

3When “Transfer phonebook from cell.”is displayed: Go to step 4.

When “Select mode”menu is displayed:

{r}: Select “Auto”or “Manual”. s{SELECT}

“Auto”: Download all entries from the cellular phone automatically. Go to step 5.

“Manual”: Copy entries you selected.

L“Select mode”menu is displayed only when the cellular phone supports PBAP (Phone

Book Access Profile) for Bluetooth connection.

4Cellular phone:

Follow the instructions of your cellular phone to copy phonebook entries.

LFor other cellular phones (not registered), you need to search for and select the base unit.

The base unit PIN (default: “0000”) may be required.

LThe entries being copied are displayed on the handset.

5Handset:

Wait until “Completed”is displayed. s{OFF}

TG77xx_(en)_QG.fm Page 8 Tuesday, November 22, 2011 9:34 AM

– 9 –

Using a Bluetooth wireless headset (optional) for landline calls

By registering a Bluetooth headset to the base unit, you can have a hands-free conversation

wirelessly for landline calls.

LWhile someone is using a cellular line, the Bluetooth headset connection is not available.

Registering a headset to the base unit

1Your headset:

Set your headset to registration mode.

LRefer to your headset operating instructions.

2Handset:

{MENU}(621

3Enter your headset PIN.

LTypically, default PIN is “0000”. Refer to the headset operating instructions.

4Press {OK}, then wait until a long beep sounds. s{OFF}

LWhen the HEADSET indicator on the base unit lights green, you are ready to use the

headset.

Operating a Bluetooth wireless headset using a landline

Refer to your headset operating instructions for headset operations.

NAnswering landline calls with your headset

To answer a landline call, turn on your headset referring to your headset operating instructions.

When you finish talking, turn off your headset referring to your headset operating instructions.

LIf you cannot hang up the call using your headset;

−press {}(STOP) on the base unit. (KX-TG7731 series)

−press {SP-PHONE}on the base unit 2 times. (KX-TG7741 series)

NSwitching between the base unit and your headset

You can switch between the base unit and your headset:

−during a landline call with the base unit speakerphone. (KX-TG7741 series)

−during an intercom call between the base unit and handset. (KX-TG7741 series)

−while listening to messages recorded on the base unit answering system.*1

KX-TG7741 series

To switch to your headset:

Press {HEADSET}on the base unit.

To switch to the base unit:

Press {SP-PHONE}on the base unit.

*1 KX-TG7731 series

LYou can only switch from the base unit to your headset. Turn on the headset referring to your

headset operating instructions.

Using Bluetooth devices

Registration

To register to use the handset.

TG77xx_(en)_QG.fm Page 9 Tuesday, November 22, 2011 9:34 AM

– 10 –

Frequently asked questions

Question Cause/solution

Why is _displayed? LThe handset is too far from the base unit. Move closer.

LThe base unit’s AC adaptor is not properly connected. Reconnect

AC adaptor to the base unit.

LThe handset is not registered to the base unit. Register it.

1Handset: {MENU}(13)

2Base unit: Press and hold {LOCATOR}for about 5 seconds

until the registration tone sounds.

3Handset: Press {OK}, then wait until a long beep sounds.

Why am I unable to

the base unit?

Depending on the compatibility of the cellular phone, you may not be

able to register it to the base unit. For more information, please visit

http://www.panasonic.com/link2cell

LConfirm that the Bluetooth feature of your cellular phone is turned

on. You may need to turn this feature on depending on your

cellular phone.

Why is there no dial tone?

(cellular line)

Make sure that the CELL 1 or CELL 2 indicator lights green and the

cellular phone is connected to the base unit.

LThe cellular phone has not been registered to the base unit.

How can I increase the

handset volume level?

LPress the volume key {+} repeatedly while talking.

Why is the conversation

noisy or cutting off?

LTry to relocate the base unit so that distance to the handset is

minimized.

LIf the same problem occurs even if the handset is next to the base

unit, call Panasonic customer support at

1-800-211-PANA (1-800-211-7262).

Can I add another

accessory handset to my

base unit?

LYes, you can add up to 6 handsets (including the handset(s) sold

with your base unit) to a single base unit.

LTo purchase additional accessory handset(s)

(KX-TGA470), please visit

http://www.panasonic.com

or call 1-800-332-5368. TTY users (hearing or speech impaired

users) can call 1-866-605-1277.

Can I keep the batteries

charging all the time?

LYou can leave the handset on the base unit or charger anytime.

This will not harm the batteries.

How can I answer a call

waiting call (2nd call)?

LPress {CALL WAIT}when you hear the call waiting tone.

For further registration information, visit

http://www.panasonic.com/RegisterYourHandset

TG77xx_(en)_QG.fm Page 10 Tuesday, November 22, 2011 9:34 AM

Otros manuales para KX-TG7732S

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de Panasonic

Panasonic

Panasonic KX-TG1811NZ Manual de usuario

Panasonic

Panasonic KX-TG5511BX Manual de usuario

Panasonic

Panasonic KX-TG2631 Manual de usuario

Panasonic

Panasonic KX-TG1032 Manual de usuario

Panasonic

Panasonic KX-TG2000B Manual de usuario

Panasonic

Panasonic KX-TG9371 Manual de usuario

Panasonic

Panasonic KX-TGP600 Manual de servicio

Panasonic

Panasonic KX-TG2214W Instrucciones de funcionamiento e instalación

Panasonic

Panasonic KX-PRX150AZ Manual de usuario

Panasonic

Panasonic KX-TG365SK Manual de usuario

Panasonic

Panasonic KX-TG2344 Manual de usuario

Panasonic

Panasonic KX-TGB110AL Manual de usuario

Panasonic

Panasonic KX-TG7200HK Manual de usuario

Panasonic

Panasonic KX-TG5230C Manual de usuario

Panasonic

Panasonic KX-HNH100AZ Manual de usuario

Panasonic

Panasonic KX-A140RUC Manual de usuario

Panasonic

Panasonic KX-TGL430 Manual de usuario

Panasonic

Panasonic KX-TCD410NL Manual de usuario

Panasonic

Panasonic KX-TGB210AL Manual de usuario

Panasonic

Panasonic KX-TG1100HK Manual de usuario

Panasonic

Panasonic KX-TG5561M Manual de usuario

Panasonic

Panasonic KX-TH1211 Manual de usuario

Panasonic

Panasonic KX-TCD210G Manual de usuario

Panasonic

Panasonic KX-UDT131 Manual de usuario

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

AT&T

AT&T CL84102 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

AT&T

AT&T E1812B Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración

AT&T

AT&T 7625 Manual de usuario

GE 27930 Manual de usuario

Radio Shack

Radio Shack 43-3557 Manual de usuario

Uniden

Uniden D1785 Series Manual de usuario