Panasonic AU-EVA1 Manual de usuario
CONNECTION TO WiFi& EVA ROP APP
AU-EVA1 Setup Guide
iOS & ANDROID
2
AUEVA1 SETUP GUIDE
EVA1 INFRA Connection
1: Press MENU button on side of camera.
Select NETWORK SETTINGS.
4: Select INFRA(SELECT). Select desired
network.
2: Select WLAN under NETWORK SEL. 5:
Enter network password under ENCRYPT
KEY. Camera will display white bars on
main
screen when connected.
3: Select NETWORK PROPERTY followed
by TYPE.
6: DHCP will switch to CLIENT.
Default IP is 192.168.0.1
*Your IP ADDRESS may be different.
Wi-Fi INFRA connects devices with the use
of a wireless access point. All devices on the
network will communicate with the same
access point. This requires a network and
access point to be set up and running.
Note: AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
3
AUEVA1 SETUP GUIDE
EVA1 + iOS INFRA Connection
Wi-Fi INFRA connects
devices with the use of a
wireless access point. All
devices on the network will
communicate with the same
access point. This requires
a network and access point
to be set up and running.
Note: AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
1: Take note of the IP address.
This will be needed for iOS setup.
*The IP address may be different for your camera.
2: First connect the iOS device to the same network as the camera.
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
– Exit MENU on camera and click ok, camera should connect.
– User ID and Password are optional and only needed if one is created and added in camera
under NETWORK FUNC.
If necessary:
Default User ID: guest (up to 31 characters)
Default Password: auguest (6-15 characters)
4
AUEVA1 SETUP GUIDE
EVA1 + Android INFRA Connection
Wi-Fi INFRA connects
devices with the use of a
wireless access point. All
devices on the network will
communicate with the same
access point. This requires
a network and access point
to be set up and running.
Note: AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
1: Take note of the IP address.
This will be needed for Android setup.
*The IP address may be different for your camera.
2: First connect the Android device to the same network as the camera.
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
– Exit MENU on camera and click ok, camera should connect.
– User ID and Password are optional and only needed if one is created and added in camera
under NETWORK FUNC.
If necessary:
Default User ID: guest (up to 31 characters)
Default Password: auguest (6-15 characters)
5
AUEVA1 SETUP GUIDE
EVA1 DIRECT Connection
1: Press MENU button on side of camera.
Select NETWORK SETTINGS.
4: Select DIRECT. Select desired network.
2: Select WLAN under NETWORK SEL. 5: AU-EVA1 is the default SSID for your device
to connect to. 5GHz BAND is recommended
for demo use. Please take note of this.
3: Select NETWORK PROPERTY followed
by TYPE.
6: DHCP will switch to SERVER.
Default IP is 192.168.0.1
*Your IP ADDRESS may be different.
Wi-Fi Direct enables devices to easily connect
with each other without requiring a wireless
access point. This method may be more
convenient depending on the situation.
Note: AU-EVA1 only supports AJ-WM50 Wi-Fi dongle.
6
AUEVA1 SETUP GUIDE
EVA1 + iOS DIRECT Connection
Wi-Fi Direct enables
devices to easily connect
with each other without
requiring a wireless access
point. This method may be
more convenient depending
on the situation.
1: Take note of the IP address.
This will be needed for iOS setup.
*The IP address may be different for your camera.
2: First connect the iOS device to the default camera network: AU-EVA1
The password is 01234567890123456789abcdef
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
– Exit MENU on camera and click ok, camera should connect.
– User ID and Password are optional and only needed if one is created and added in camera.
If necessary:
Default User ID: guest (up to 31 characters)
Default Password: auguest (6-15 characters)
7
AUEVA1 SETUP GUIDE
EVA1 + Android DIRECT Connection
Wi-Fi Direct enables
devices to easily connect
with each other without
requiring a wireless access
point. This method may be
more convenient depending
on the situation.
1: Take note of the IP address.
This will be needed for Android setup.
*The IP address may be different for your camera.
2: First connect the Android device to the default camera network: AU-EVA1
The password is 01234567890123456789abcdef
Next, open EVA ROP app.
– Enter IP Address after clicking on settings as shown in the picture.
– Exit MENU on camera and click ok, camera should connect.
– User ID and Password are optional and only needed if one is created and added in camera.
If necessary:
Default User ID: guest (up to 31 characters)
Default Password: auguest (6-15 characters)
For additional support, please call:
855-PSC-TECH option 2
AU-EVA1 Operation Manual
FAQs
Camera does not establish connection to access point (Infra) or device (Direct).
– Make sure Wi-Fi dongle is properly connected. Turn off camera, disconnect
and reconnect dongle. Turn on camera. Only AJ-WM50 is compatible.
– Make sure SSID/network password is correct(Infra). Make sure SSID/password
on external device connecting to camera is correct(Direct).
– Exit the camera menu if open.
– Connection may take up to 30 seconds.
Why is a communication error message popping up in the app?
– Exit the camera menu if open. Close and reopen the app.
– Make sure the IP address of the camera is the same as what was typed in the
app settings.
– Make sure Used ID and Password are the same as what was entered in the
camera (if applicable).
iOS or Android device disconnects from the camera when using Direct mode.
– External devices may disconnect due to the lack of internet connection.
– A notification should pop up on your device to continue connection.
– If not, connect back to the camera manually in device settings.
Otros manuales para AU-EVA1
3
Otros manuales de Videocámara de Panasonic
Panasonic
Panasonic AJ-SPC700 Manual de usuario
Panasonic
Panasonic AVCCAM AG-HSC1UE Manual de usuario
Panasonic
Panasonic HC-X920 Manual de usuario
Panasonic
Panasonic Palmcorder PV-L691 Manual de usuario
Panasonic
Panasonic NV-EX21B Manual de usuario
Panasonic
Panasonic HX-WA2 Especificaciones técnicas
Panasonic
Panasonic AJ-HD1400MC Manual de usuario
Panasonic
Panasonic Digital Palmcorder PV-DV901 Manual de usuario
Panasonic
Panasonic AG-DVC7P Manual de usuario
Panasonic
Panasonic HDC-HS300 Manual de usuario
Panasonic
Panasonic AG-DVC10 Manual de usuario
Panasonic
Panasonic AG-HMC71E Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
Panasonic
Panasonic AG-X2 Manual de usuario
Panasonic
Panasonic NV-R33E Manual de usuario
Panasonic
Panasonic SDR-H100 Manual de usuario
Panasonic
Panasonic Digital Palmcorder PalmSight PV-DV600 Manual de usuario
Panasonic
Panasonic NVMS5 Manual de usuario
Panasonic
Panasonic Palmcorder PV-L579 Manual de usuario
Panasonic
Panasonic HC-W580M Manual de usuario
