Palsonic MODEL 5179G Manual de usuario

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL:(02)9313 7111

FAX:(02)9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA:1300 657 888

51CM CORDLESS REMOTE COLOUR TELEVISION

MODEL: 5179G

OWNER'S MANUAL

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 4164

Standards Australia

APP No: N15957

Sleep timer...................................................16

Playing Games.............................................15

SYSTEM setting.........................................14

CLOCK setting...........................................13

Convenient Picture and Sound Control....12

Channel selection.........................................11

AFT (Automatic Frequency Tuning).......10

MFT (Manual Fine Tuning)......................9

Menu Operation.....................................6

Tuning in.................................................7

Turning the Power On/Off................. ..6

Other functions............................................17

CALENDAR function..............................17

CHILD LOCK setting...............................17

CHANNEL SWAP...................................18

Super receiving function...........................18

Progam Scan.............................................18

CONNECTING OTHER EQUIPMENT

External Equipment Connections...........19

Video playback........................................19

Recording TV program............................19

OTHERS

Troubleshooting...........................................20

Specifications................................................21

Remote controller...................................5

Back view.................................................4

Front view................................................4

Battery installation..................................3

Antenna connection.................................3

Cautions for safety...................................2

Features ...................................................1

INTRODUCTION

NOTES FOR OPERATION

INSTALLATION

APPEARANCE

Contents

OPERATION

To preset channels (ASM).........................7

To preset channels (SEARCH)..................7

To skip unnecessary position numbers......9

The setting of colour and sound system..10

Congratulations on your purchase of this Palsonic colour television receiver.

We recommend that you thoroughly read this manual before use to fully enjoy the many functions

and excellent effects of this receiver.

Retain this manual in an easily accessible location for future reference.

* Screen displays and illustrations in this manual may differ from the actual ones for better

visibility.

English/Chinese on-screen menu display

INTRODUCTION

Features

Hyperband

256 preset channels

Intellectualized I C-bus control

Full function remote control

SLEEP timer, ON Timer, OFF Timer

Non-signal blue background display and AUTO-POWER-OFF function

Games, built-in 500 years' calender

Child Lock function, channel swap

Program scan function

Five picture modes' setting

AUDIO/VIDEO input & output terminals

Advanced digital picture improvement circuit

NOTES FOR OPERATION

Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please

turn off the power supply and remove the power plug. When it is to be left unattended for

a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to

avoid thunder strike.

Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted

on the TV set.

Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power

supply of the other type.

When an unusual situation

occurs, turn off the power

switch at once and remove the

plug from the wall outlet.

Contact a qualified service

department in your local area.

Do not expose the TV set to

rain or excessive moisture, to

prevent tire disaster or

electric shock. Avoid using

the set in very warm or damp

places. Never use it in a

bathroom.

There exists High Voltage in

this TV set. Do not remove

the cover to avoid danger.

The TV set should be placed

on an adequate place without

exposing it to direct sunlight

and other sources of heat to

prevent the deformation of the

cabinet or damage to components.

When the TV set is to be left

unattended, please turn off the

power switch and remove the

plug from the wall outlet.

In order to wipe dust off the

picture tube or off the cabinet,

you should remove the power

plug from the wall outlet first.

You can wipe lightly with a

piece of dry, clean, soft cloth.

Do not cover the Ventilating

holes in the cabinet. Keep a

space of more than 5cm from

the walls to the TV set, to

guarantee the good ventilation.

When the power cord or the

plug is damaged, please

contact a qualified service

department to get service.

Cautions for safety

Twin-lead aerial feeder (300 )

Effective range of the remote

control operation

Antenna Connection

(1) Remove the back battery cover.

Installation

To ensure a bright-colored and clear picture, you should use an outdoor aerial or CATV cable. If

the signals are strong enough, you may use an indoor aerial.

Note: In case of using the

for UHF/VHF aerial, use a 300-75

ohm adaptor (not supplied)

When using the coaxial cable (not

supplied) (75 ) for UHF/VHF

aerial, connect the plug into the

75 ohm aerial socket directly.

Note:

When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the

power switch on the TV while connecting the antenna lead.

In thunder and lightning weather, please disconnect the outdoor aerial to avoid thunder/lightning

strike.

(2) Insert two size AAA batteries according to

the polarity indication inside the remote

controller.

Notes:

1. When the remote controller is not used for

an extended period of time or the batteries

are worn out, please remove the batteries in

time to avoid battery leakage.

2. Avoid moisture and mechanical shock to

the remote controller.

3. Do not drop, dampen or disassemble the

remote controller.

Battery installation

Front view

Back View

Appearance

Note: Functions of , MENU, TV/AV, VOL , CH are also provided to the

remote controller.

Remote Controller

Appearance

To turn the power on/off

1. Press the POWER switch, the red power indicator lights up.

Turning the Power On/Off & Menu Operation

OPERATION

*Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on

If you want to turn off the TV temporarily, press the button on the remote controller to switch

the set to standby mode

The following describes how to turn the TV on/off using the TV's main switch and the remote

controller.

the screen. After 15 minutes if there are still no signals to the TV, it will enter into standby

mode automatically.

If no picture appears on the screen, press the button on the set or on the remote

controller to turn the set on and the yellow indicator light up.

3. Press the POWER switch to turn off the set completely.

Special indication:

Last-Mode-Memory: after turning off the power, the last TV mode, picture and sound setting mode and

preset channels all are memorized. Therefore, next time you turn on the TV, the TV will work in the

previous setting mode.

If you directly pressed the main power switch on the TV to turn it off, you must press the main

power switch to turn on the TV.

If you pressed the main power switch to turn off the TV when in standby mode, press the main

power switch and then operate from the remote controller to turn the TV on.

Auto-Power-Off : there are two kinds of Auto-Power-Off function:

1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically turn

2. SLEEP-timer function.

off after about 10 minutes.

3. OFF timer function.

Menu Operation

Press MENU button to enter into cartoon graphics menu page, press MENU button or POS+/- button

repeatedly can select different graphics. The selected graphics is highlighted and the menu name will

appear above the graphics (each graphics represents a menu) . Press VOL+/- button to enter into the

sub-minu. To call, press RECALL button.

OPERATION

Tuning in

There are two ways to preset channels: to preset channels automatically and to preset channels

manually. Below we will describe how to preset the channels by making use of the menu.

Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area

automatically.

To enter into the PRESET menu

Press the PRESET button to display PRESET the menu on

the screen.( Or you can press the MENU button repeatedly

to select and highlight PRESET icon, then press the VOL+

button to enter into the PRESET menu.)

Note: If there is any channel which is in CHILD LOCK ON mode, the

PRESET menu can not be entered. How to enter into the PRESET menu

to preset channels, please refer to page 17.

PRESET 22

SKIP OFF

BAND UHF

FINE

AFT ON

ASM

S-RCV OFF

In AV mode, press the MENU button, on the interface there are three icons in red background colour

(PRESET, SWAP, LOCK), which indicates these items can not be used in AV mode.

ASM (Automatic Search Memory)

PRESET

Press the POS+/- button to select and highlight

ASM

Press the VOL+/- button to start the ASM. All

active channels will be preset and stored into the

memory automatically. After presetting, the TV will

return to the first channel program.

3. During the process of ASM, pressing the PRESET

button or MENU button on the remote controller

will stop the process.

SKIP

BAND

FINE

AFT

ASM

S-RCV

OFF

UHF

OFF

PRESET 22

SKIP ON

BAND UHF

FINE OFF

S-RCV OFF

ASM

Note: Before ASM (Auto search), please set the current channel's colour system to AUTO and sound

system to local area's sound system (refer to page 10), thus after ASM, all programs' colour and sound

system have been set correctly. Otherwise you should reset every program's colour and sound system

according to page 10.

To preset channels (ASM)

POS

AFT

POS

OPERATION

Tuning in (continued)

Use the SEARCH function if desired channels can not be preset with the ASM or if you would like

to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP

functions.

If ASM can not preset the desired channels, or you want to preset the desired channels one by one with

the preferred channel numbers, please make use of SEARCH.

Enter into PRESET menu, press the POS+/- button to

select and highlight POS. Press the VOL+/- button to

select a desired position number (from 0-255).

Note: you can also press 0-9 button to select a one-digit

position number.

Press --/--- button and number buttons to select a two-

digit or three-digit position number.

Press the POS+/- button to select SEARCH. Press the

VOL+ button to search channels from current channel

to higher channel. Press the VOL- button to search

channels from current channel to lower channel. When

a channel is located, the searching stops, this channel is

then memorized with the preset position number.

Note: you can also make use of BAND selection to quicken the

searching process in your desired band. Press the POS+/- button to

select BAND, pressing the VOL+/- button moves the band to the next

one in the sequence below.

V-L V-H UHF

PRESET 4

SKIP ON

BAND V-L

FINE

AFT OFF

ASM

S-RCV OFF

POS

3. When you want to store another channel at another position, repeat steps 1 & 2 above.

Note: After SEARCH, to exit the PRESET menu, press the RECALL button, or press PRESET

button or MENU button repeatedly until OSD disappears.

To preset channels (SEARCH)

PRESET 20

SKIP OFF

BAND V-H

FINE

AFT OFF

ASM

S-RCV OFF

POS

PRESET 4

SKIP ON

BAND V-L

FINE

AFT OFF

ASM

S-RCV OFF

POS

Tabla de contenidos

Otros manuales de Televisor CRT de Palsonic

Palsonic

Palsonic 6138 Manual de usuario

Palsonic

Palsonic 6827G Manual de usuario

Palsonic

Palsonic 3430GM Manual de usuario

Palsonic

Palsonic 5169P Manual de usuario

Palsonic

Palsonic 6140G Manual de usuario

Palsonic

Palsonic 5125PF Manual de usuario

Palsonic

Palsonic 3410P Manual de usuario

Palsonic

Palsonic 5140TS Manual de usuario

Palsonic

Palsonic 6828PFS Manual de usuario

Palsonic

Palsonic 3498 Manual de usuario

Palsonic

Palsonic 5180G Manual de usuario

Palsonic

Palsonic 5155PF Manual de usuario

Palsonic

Palsonic 5159G Manual de usuario

Palsonic

Palsonic 6825G Manual de usuario

Palsonic

Palsonic 5130TS Manual de usuario

Palsonic

Palsonic 6140GY Manual de usuario

Palsonic

Palsonic 3499G Manual de usuario

Palsonic

Palsonic 5159 Manual de usuario

Palsonic

Palsonic 4910 Manual de usuario

Palsonic

Palsonic 3420B Manual de usuario

Palsonic

Palsonic 3499P Manual de usuario

Palsonic

Palsonic 5130G Manual de usuario

Palsonic

Palsonic 5159P Manual de usuario

Palsonic

Palsonic 3435TS Manual de usuario

Manuales populares de Televisor CRT de otras marcas

JVC

JVC AV-21QS5SP Manual de usuario

Philips

Philips COLOR TV 25 INCH TABLE TR2517C Manual de usuario

Hitachi

Hitachi 27CX01B Manual de usuario

LG 30FZ1DC Manual de usuario

Sony

Sony FD TRINITON WEGA KV-24FS120 Manual de usuario

RCA

RCA F19442 Manual de usuario

Samsung

Samsung CS761 Manual de usuario

Philips

Philips 29PT4973 Manual de usuario

Panasonic

Panasonic TC-29P100 Series Manual de usuario

RCA

RCA F19422 Manual de usuario

Sony

Sony WEGA KV 32HS20 Manual de usuario

Samsung

Samsung SlimFit TX R3079WH Manual de usuario

Toshiba

Toshiba CF13H22 Manual de usuario

Magnavox

Magnavox MS3650C - 36" Smart Ctv Manual

Toshiba

Toshiba 14AF41 Manual de usuario

Philips

Philips 21PT9469 Manual de usuario

Mitsubishi

Mitsubishi CS-35305 Manual de usuario

Hitachi

Hitachi 35UX60B, 35TX10B Manual de usuario