palmiye SILVER PLUS Manual de usuario
1
Installation Manual
Silver Plus Freestanding
2
Dear Customer,
Installation manual contains suggestions and rules for fast and exact
installation of our product. We recommend you to read our instruction
carefully.
During installation, all necessary actions have to be carried out by
authorized and specialized technicians.
All unauthorized interventions during warranty period will invalidate
the warranty.
3
INDEX
04
06
50
78
05
11
71
61
82
83
84
1. Symbols, Precautions and Warnings
2. Terminology
3. Packaging
4. Installation Steps
6. Sensors and Automation
7. Hardware
8. Tools
9. Frequently Asked Questions
10. Risk Table
11. Motorization
5. Programming / Resetting of Panels and Lights
4
1. SYMBOLS, PRECAUTIONS AND WARNINGS
1.1. Symbols
Attention: General operation notes.
Attention: General hazards; possible risk for persons.
Attention: Electrical hazard.
Attention: Risk of crushing hands.
Contact: Palmiye service department or related parties.
1.2. Precautions and Warnings
The installation and maintenance personnel (installers, electricians etc.) must have sucient
expertise and knowledge for undertaking the task at hand.
In case of anomalies, immediately stop the work and contact with hospital.
Palmiye will not be responsible on use of non-original parts or unauthorized
interventions and modications for damage caused to people or animals or property.
General Precautions
Before starting of any assembly, maintenance or cleaning operations, make sure that you have
fully understood the indications in this manual.
All electrical connections for the product, installation of automation accessories must be
made by qualied personnel.
The dealer will provide the necessary ttings for the wall and oor.
In case of any incompatibility, call Palmiye.
General Safety Precautions
It is good practice to remember that all moving parts can be a source of danger.
Make sure that power supply is cut o during maintenance.
It is recommended never to intervene on moving parts and to ensure that no operator
is near to the moveable parts/control unit box before reactivating it after a technical or
maintenance intervention.
You can scan the barcodes located at the bottom of the page to see video
demonstration of the related steps.
5
2. TERMINOLOGY
BOM ID Description Qty
1 Back Beam - 100x150mm 1
2 Front Pillar - 100x100mm - Full Drainage 1
3 Front Pillar - 100x100mm - Half Drainage 1
4 Front Pillar - 100x100 w/o Drainage 1
5 Side Beam Pillar - 100x100mm 1
6 Cross Beam - 40x120mm 2
7 Side Beam Pillar (Until Rail) -50x100mm 1
8 Back Pillar - 100x100mm 3
9 Side Beam - 50x150mm 2
10 Special Side Beam - 100x150mm 1
11 Back Covering - 100x100x2,5mm 1
12 Cover Side Structure - Plus Left 1
13 Cover Side Structure - Plus Right 1
14 Cross Beam - 42x150mm 2
15 Fabric Cover 63x100 8
16 Fabric 1
17 Motor 1
18 Front Beam - 100x150x3mm 1
19 Rail Prole - Plus (120x150mm) 3
20 Rain Gutter 1
6
BOM ID Description Qty
1 100x150 Prole Attachment Alu 20 cm 2
2 100x150 Prole Attachment Alu 40 cm 1
3 100x150 Aluminium Prole 1
4 Side Cap - 100x150mm 2
5 4,8x25 Self Tapping Screw 24
6 Rear Beam Rail Connecting Apparatus - Plus 3
3. PACKAGING
3.1. Preliminary Checks
On receipt of the packed goods and before starting their assembly, check the integrity of the
material and the presence of all the components necessary for the installation.
In case of anomalies, immediately stop the work and contact with hospital.
Fixing elements such as screws, plugs etc. are included in the box.
If not please contact service department of Palmiye.
Do not use a knife to avoid the risk of ruining the paint or other materials.
3.2. Packed Parts
3.2.1. Back Beam
7
BOM ID Description Qty
14 Wheel Carriage 5
2 M4, 8x25mm self-drilling screw 12
3 Back roll bearing set 1
4 Fixed area 1
5 Square nut 1
6 Front roll bearing set 1
7 M8x16 hexagonal hed bolt 1
8 Rail - 120x150x3mm Al. 1
9 Rail Gasket GS294 2
10 Rail Prole Cast Aluminium End Cap - Roundec 1
11 Rail Rear Connection Apparatus Left 1
12 Rail Rear Connection Apparatus Right 1
3.2.2. Rail
8
3.2.3. Front Beam
2
4
3
1
6
5
2
4
3
1
6
5
BOM ID Description Qty
1 100X150 Profile Attachment Alu 20 cm 2
2 100X150 Profile Attachment Alu 40 cm 1
3 4,8X25 Self Tapping Screw 24
4 Front Beam - 100x150x3mm Al. 1
5 Front Beam Cast Aluminium Cap - Rounded 100x150 mm 2
6 Front Beam Rail Connecting Apparatus - PLUS 3
BOM ID Description Qty
1 100x150 Prole Attachment Alu 20 cm 2
2 100x150 Prole Attachment Alu 40 cm 1
3 4,8x25 Self-drilling Screw 24
4 Front Beam - 100x150x3mm Al. 1
5 Front Beam Cast Aluminium Cap - Rounded 100x150mm 2
6 Front Beam Rail Connecting Apparatus - PLUS 3
3.2.4. Pillar
BOM ID Description Qty
1 200x200x10mm Aluminium Flange 1
2 100x100mm Aluminium Pillar w/o drainage 1
2
1
2
1
BOM ID Description Qty
1200x200x10mm Aluminium Flange 1
2 100x100mm Aluminium Pillar w/o drainage 1
9
3.2.5. Side Beam (Standard)
BOM ID Description Qty
1 50x150mm Aluminium Prole 1
BOM ID Description Qty
1-2 (Welded) Aluminium Prole 50x150-50x100 1
3.2.6. Side Beam (Special)
11
BOM ID Description Qty
150x150mm Aluminum Profile 1
21 21
BOM ID Description Qty
1-2 (Welded) Aluminum Profile 50x150-50x100 1
10
2. Metal Box
U Brackets, Mounting brackets, Gutter caps, Front beam and Rail connecting bracket caps,
Hexagonal motor shaft drives, M12x185mm countersunk dacromented bolt, M10x160mm
hexagonal dacromented bolt, M4,8x25mm self-drilling screws, M5,5x25mm self-drilling with
sealant washer screws, drainage elbow, Stainless steel anchorages, (If you have a decorative
fabric: M5,5x45mm philips screw, M5,5x70mm philips screw) are inside the Metal Box. It has a
blue label on the box.
3. Plastic Box
Spot LED, Rubber for gutter, Fabric support prole plastics and its caps, motor shaft
drive transmitter are inside the Plastic Box. It has a yellow label on the box.
ELECTRIC
METAL
PLASTIC
3.2.7. Boxes
1. Electrical Box
Electrical Equipments - Lighting box, Synchronized control box, Remote Controls, Sensors - are
inside Electric box. It has a red label on the box.
Tabla de contenidos
Manuales populares de Luz exterior de otras marcas
Lindby
Lindby 9949029 Manual de usuario
HEPER
HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento
HEPER
HEPER LW8034.003-US Instrucciones de instalación y funcionamiento
Maretti
Maretti VIBE S 14.6080.04.A Manual de usuario
BEGA
BEGA 84 253 Manual
HEPER
HEPER MINIMO Instrucciones de instalación y funcionamiento
LIGMAN
LIGMAN BAMBOO 3 Manual de usuario
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Manual de usuario
urban ambiance
urban ambiance UQL1273 Manual de usuario
TotalPond
TotalPond 52238 Manual de usuario
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Manual de usuario