Packard Bell Medi TV Manual de usuario
1
Dear customer,
Thank you for purchasing a Packard Bell Medi@ TV. This Quick Start Guide will help you set up your
Medi@ TV in 5 simple steps:
I. Connecting your Packard Bell Medi@ TV
II. Installing software on the computer
III. Starting Packard Bell Media Organizer
IV. Configuring your Medi@ TV
V. Starting the Viewer
Note that most of the instructions in this guide are valid for the net2plug edition. For other types of net-
work connections, please refer to the electronic documentation included with Packard Bell Medi@ TV or
the documentation that was supplied by the manufacturer of your network hardware and/or software.
I. Connecting your Packard Bell Medi@ TV
1. Medi@ TV => TV
RCA, SCART
Please match colours.
2a. Medi@ TV => net2plug (net2plug edition only)
Caution: for use with power supply modes PL9645-ETP-UK-BP or PL9645-ETP-EU-BP.
Please find the ‘Security-ID’ number on the power adapter. You should note this down at the
back of this guide, because you will need it later.
A/V Cable RCA SCART/PERITEL
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 1
2
2b. Medi@ TV => PC (Ethernet edition only)
Caution: for use with power supply model GPSA-1200125.
2c. WiFi (WiFi edition only)
PCMCIA
PC
Crossed LAN cable
English
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 2
3
Caution: for use with power supply model GPSA-1200125.
3. Remote control
Install the batteries first. Please use LR03 (AAA) batteries only.
II. Installing software on the computer
Insert the Medi@ TV installation CD into the computer and follow the on-screen instructions.
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 3
4
Please select step . This will install the
net2plug adapters to set up your home
network. Follow the instructions on the
screen.
During installation you are requested to enter a password. Please note down this password on the back
cover of this guide. You will need this information later.
a. When prompted, connect the net2plug USB adapter to a USB port of the computer using the USB
cable (included).
b. Plug the net2plug USB adapter into a convenient power socket.
c. Follow the on-screen instructions to complete the installation.
The next step, step , installs the Packard Bell Media Organiser. This is the software that helps you
manage your multimedia library.
During this step you are asked to insert a database option. We recommend you select Share database
for all users.
English
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 4
5
After finishing step , you will be requested to install Packard Bell MediaServer (step ), a tool
that manages your home network installation. Please click on OK. Again, follow the instructions on the
screen. When the installation is ready, your computer needs to be restarted before Packard Bell Medi@
TV can work correctly.
If you wish you can install sample media (step ) to get used to Packard Bell Medi@ TV. You can also
install Adobe®Acrobat®Reader (step ) that allows you to read the included electronic documenta-
tion. You don’t have to do this if Acrobat Reader is already installed on your computer.
III. Starting Packard Bell Media Organizer
Start Packard Bell Media Organizer and follow the instructions on the screen to organise
your multimedia library.
You can use Packard Bell Media Organizer to add and remove contents that
you can view on your TV.
1. Select a folder that you wish to search for data and click on the Scan button.
2. Media files will show up when found. Select the files you wish to add.
3. Add the selected media to Media Organizer.
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 5
6
IV. Configuring your Medi@ TV
a. From the Welcome screen, select the language of your choice.
b. Select the type of network that you are going to use. If you have purchased the Packard Bell net2plug
edition, then please select Wired. For other types of network, please refer to the electronic User’s
Guide.
The following steps assume that you have selected Wired.
c. Select Automatic (DHCP) in the assignment method window.
d. Restart Medi@ TV to activate the new network settings. Please click on OK to do so.
If after five minutes the Medi@ TV cannot connect to the network:
On the television screen:
• Select Cancel.
• From the home page, select Network and then confirm that you want to change your network
settings.
• Select Wired.
•
Enter the following IP settings:
IP Address: 192.168.37.11 - Subnet Mask: 255.255.255.0
English
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 6
7
•
Restart Medi@ TV to activate the new network settings. Please click on OK to do so.
On your computer:
•
Click on Start => Control Panel => Network. Right-click on the USB power packet LAN
connection and select Properties.
•
Double click on Internet Protocol (TCP/IP) and enter the following IP settings:
IP Address: 192.168.37.10 - Subnet Mask: 255.255.255.0
•
Click on OK to finish the network configuration.
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 7
8
V. Starting the Viewer
With the included remote control you have easy access to all func-
tions of Packard Bell Medi@ TV. Some buttons have different func-
tions depending on the type of media you are playing. Please press
the Help button (?) on the remote control for information about
each button.
You may need to install proper codecs to play certain file
types. Please follow the instructions on the screen when
asked to do so.
After setting up Packard Bell Medi@ TV, you are ready to view and
listen to your data through your TV set. Before starting the Viewer,
please assure that your PC is not in Suspend mode! You may have to
close some applications on your PC to free up memory.
Packard Bell has provided a User’s Guide in electronic format. To
access this documentation, please select the Help menu in Packard
Bell Media Organizer.
English
Français
Help button
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 8
9
Cher client,
Merci d'avoir acheté Packard Bell Medi@ TV. Ce Guide de prise en main vous explique comment ins-
taller Medi@ TV en cinq étapes d'une grande simplicité :
I. Branchement de Packard Bell Medi@ TV
II. Installation des logiciels sur l'ordinateur
III. Démarrage de Packard Bell Media Organizer
IV. Configuration de Medi@ TV
V. Démarrage du visionneur
Veuillez noter que la plupart des instructions fournies dans ce guide sont applicables à l'édition net2plug. Pour
tout autre type de connexion réseau, consultez la documentation électronique qui accompagne Packard Bell
Medi@ TV ou la documentation fournie par le fabricant de vos équipements et/ou logiciels réseau.
I. Branchement de Packard Bell Medi@ TV
1. Medi@ TV => Téléviseur
RCA, SCART
2a. Medi@ TV => net2plug (édition net2plug uniquement)
Attention : À utiliser avec les modèles d'alimentation PL9645-ETP-UK-BP ou PL9645-ETP-
EU-BP.
Veuillez rechercher 'l'identifiant de sécurité' sur l'adaptateur d'alimentation et le noter au
dos de ce guide. Vous en aurez besoin ultérieurement.
A/V Cable RCA SCART/PERITEL
Veuillez faire correspondre les couleurs.
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 9
10
2b. Medi@ TV => PC (édition Ethernet uniquement)
Attention : À utiliser avec le modèle d'alimentation GPSA-1200125.
2c. WiFi (édition WiFi uniquement)
PCMCIA
PC
Câble LAN croisé
Français
QSG_Medi@TV_6923340100.qxd 24/03/04 18:23 Page 10
Otros manuales para Medi TV
2
Tabla de contenidos
Idiomas:
