Ozito SCMS-10STANDU Manual de usuario

ASSEMBLY OF STAND

SLIDING

COMPOUND MITRE

SAW & STAND

254mm (10”)

STAND ASSEMBLY

STAND

FASTENERS

The stand is constructed by assembling each half of the structure and

then joining them together.

6 Bolt Small - 24 pc

7 Spring Washer Small - 24 pc

8 Washer Small - 24 pc

9 Nut Small - 24 pc

10 Rubber Foot - 4 pc

11 Saw Mounting Bolts - 4 pc

1 Short Upper Support - 2 pc

2 Long Upper Support - 2 pc

3 Short Lower Support - 2 pc

4 Long Lower Support - 2 pc

5 Leg - 4 pc

1086 9

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

12 3 4 5

1 Remove the stand components

from the box and group matching

pieces together. Check that you

have all the contents listed in this

manual.

2 Lay two legs on the ground and

one long lower support in between

the legs aligning the bolt holes.

The side support should have its

lip on the high side (facing up)

and should sit inside the legs.

3 Once aligned, insert small bolts

into the 2 aligned holes at both

sides of the lower support. Insert

the bolt from the outside and t a

small washer, spring washer and

nut onto each bolt to secure (only

hand tight at this initial stage).

4 Place one long upper support on

the inside of the legs at the top

Insert a bolt from the outside into

the aligned holes at either side

of the upper support and hand

tighten a small washer, spring

washer and nut onto each.

5 At this stage your frame should

look like this.

117

SCMS-10STANDU

Art.-No.: 30.004.09 I.-No.: 11018

WARNING! ONLY USE THIS STAND WITH THE PROVIDED

MITRE SAW OZITO SCMS-10STAND. THE STAND MUST

NOT BE USED WITH OTHER PRODUCTS OR FOR OTHER

APPLICATIONS.

SCMS-10STANDU

11 Once all of the members are

joined together and all fasteners

are assembled, place the 4

mounting bolts into the holes

at the top of the stand. This

will ensure the mounting holes

align correctly while the stand is

tightened.

Tighten all nuts and bolts rmly.

Note: We recommend that the stand

is mounted to a stable surface

for additional stability.

12 The Rubber Feet can now be

tted.

13 Remove the mounting bolts that

you inserted prior to tightening

the stand, then place the saw on

the stand. The supplied mounting

bolts, spring washers, washers

and nuts should be used to

secure the saw to the top of the

stand.

6 Align one short lower support

inside the legs at the same height

as the long lower support. Ensure

that the lip of the side support is

facing up.

Insert 2 small bolts in the aligned

holes from the outside and

attaching a small washer, spring

washer and nut (only hand tight at

this initial stage).

7 On the same side as Step 6,

assemble one short upper support

to the top of the upper leg using

small bolts, washers, spring

washers and nuts.

One half of the frame is now

complete.

8 Repeat the same process for the

other side, which should leave

you with 2 identical halves.

10 Align the holes of each opposing

member. Bolts, washers, spring

washers and nuts can be inserted

& tightened with hand force only.

9 These halves can now be aligned

together to complete the frame.

Note: Nuts & bolts should only be

nger tight at this stage.

Este manual sirve para los siguientes modelos

Otros manuales de Sierra de Ozito

Ozito

Ozito CMS-1621S Manual de usuario

Ozito

Ozito SCMS-2125U Manual de usuario

Ozito

Ozito CMS-210 Manual de usuario

Ozito

Ozito MCS-355 Manual de usuario

Ozito

Ozito PXC PXTBSS-036 Manual de usuario

Ozito

Ozito JSW-6100 Manual de usuario

Ozito

Ozito TBS-2010 Manual de usuario

Ozito

Ozito OZMCS2000WB Manual de usuario

Ozito

Ozito RSW-5200U Manual de usuario

Ozito

Ozito SCMS-1621 Manual de usuario

Ozito

Ozito SCMS-1812 Manual de usuario

Ozito

Ozito BSW-2581U Manual de usuario

Ozito

Ozito RSW-5100 Manual de usuario

Ozito

Ozito UMS-1810 S Manual de usuario

Ozito

Ozito CSL-235 Manual de usuario

Ozito

Ozito SCMS-8MSS Manual de usuario

Ozito

Ozito SCMS-1621MS Manual de usuario

Ozito

Ozito TBS-2000 Manual de usuario

Ozito

Ozito CMS-1621 Manual de usuario

Ozito

Ozito PXCMSS-210 Manual de usuario

Ozito

Ozito PXCPRS-018 Manual de usuario

Ozito

Ozito CMS-1810 Manual de usuario

Ozito

Ozito CMSB-1421 Manual de usuario

Ozito

Ozito Power X Change PXBCSS-184 Manual de usuario

Manuales populares de Sierra de otras marcas

RIDGID

RIDGID BS1400 Manual de usuario

ATIKA

ATIKA BWS 400-2 Manual de usuario

RGC

RGC FS20 Manual de usuario

Makita

Makita M2300 Manual de usuario

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manual de usuario

IMET Spa

IMET Spa SIRIO 370 AF-E Manual de usuario

Optimum

Optimum OPTisaw CS 275 Manual de usuario

Makita

Makita BPB180 Manual de usuario

Stihl

Stihl MS 462 C-M Manual de usuario

AEG

AEG TS 250 K Manual de usuario

Meec tools

Meec tools 004665 Manual de usuario

Makita

Makita LS1018L Manual de usuario

Ryobi

Ryobi RCS1400 Manual de usuario

DeWalt

DeWalt DCS391 Manual de usuario

Sealey

Sealey SA72 Manual de usuario

skilsaw

skilsaw SPT88 Instrucciones de montaje

Urrea

Urrea SI810 Dimensiones y guía de instalación

EINHELL

EINHELL BKG 210/1 Manual de usuario