Ozito LMP-301 Manual de usuario

HAND MOWER

300mm

HAND LAWN MOWER

300mm MODEL NO. LMP-301

Always Wear Eye, Face & Ear Protection www.ozito.com.au

OPERATING INSTRUCTIONS

0208

HAND MOWER

300mm

Cutting width: 300mm

Cutting height: 15 - 40mm

Features: Height adjustable

Self sharpening blades

Quiet operation

1. Wheels

2. Height adjustment knobs

3. Rear roller

4. Lower handle

5. Upper handle

6. Handle uprights

7. Cutting bar adjustment

8. Blade guard

SPECIFICATIONS - MODEL NO. LMP-301

INTRODUCTION

SAFETY INSTRUCTIONS

ASSEMBLY

1. Never allow children or people unfamiliar with these instructions to use the mower.

2. Only use the mower in the manner and for the functions described here in.

3. Never operate the mower when you are tired, ill or under the influence of drugs,

alcohol or medicine.

4. The operator or user is responsible for accidents or hazards occurring to other

people or their property.

5. Use the mower only in daylight or good artificial light.

6. Avoid operating your mower in wet grass, where feasible.

7. Take care in wet grass, you may loose your footing.

8. On slopes be extra careful of your footing and wear non-slip footwear.

9. Mow across the face of slopes, never up and down.

10. Exercise extreme caution when changing direction on slopes. Walk never run.

11. Mowing on banks and slopes can be dangerous. Do not mow on banks or

steep slopes.

12. Do not walk backwards when mowing, you could trip.

13. Never cut grass by pulling the mower towards you.

14. Never operate the mower with damaged guards or without guards in place.

15. Keep hands and feet away from the blade at all times and especially when the

mower is in use.

16. Do not put hands near the blades during operation.

Your Ozito Hand Lawn Mower comes partly assembled, only the handle

requires assembly.

To assemble the handle, find the U-shaped bar with the open (circular) ends and insert

the two handle uprights into the ends. Ensure the uprights curve outwards once inserted.

Using two sets of nuts and bolts, line up the holes to enable you to insert a bolt with a

washer all the way through both bars and fasten with another washer and nut.

Congratulations on purchasing an Ozito Hand Lawn Mower.

We aim to provide quality tools at an affordable price.

We hope you will enjoy using this tool for many years.

Your Hand Lawn Mower LMP-301 has been designed for

small to medium sized lawns and is intended for DIY

purposes only.

ASSEMBLY (cont.)

ADJUSTMENTS

Find the U-shape bar with flattened ends with large holes. Insert the bent end of

the bar between the two protruding ends of the section just assembled. Line up

the two holes on both sides and insert a bolt with a washer all the way through

both bars and fasten with another washer and nut. Do the same with the remaining

3 sets of holes.

Now the handle is fully assembled, and ready to be attached to the mower head.

To attach the handle to the mower head, locate the two metal lugs found forward

of the cutting bar adjustment knobs. To attach the handle, insert one of the large

holes in the handle arm over the lug, then repeat the same process with the other

side. It may be required to use some force to squeeze the two arms together to

allow room for locating the second arm over the remaining metal lug.

Changing the Cutting Height

Changing the cutting height is quick, easy, and requires no tools. Simply unscrew

the locking knobs on each side of the rear roller. This enables the roller assembly to

slide up or down to place the cutting bar at a different height level. Make sure the

height is the same on both sides. Re-tighten the locking knobs until the roller

assembly is secured in position.

Note: It is essential that the height is the same on both sides of the hand lawn mower.

Adjusting the Cutting Bar to the Blades

The cutting bar should be as close to the blades as possible, they should make

slight contact making a whispery sound (like scissors opening and closing) when

the blades are rotated manually, ensure the bar does not stop the blades from

rotating. To raise or lower the bar loosen or tighten the adjustment knobs on the

ends of the cutting bar (located behind the reel blades, above the roller).

Note: A small 1/16 of a turn is a major adjustment.

To loosen the blades, or move them further away from the cutting bar, loosen the

cutting bar adjustment knobs on each side equally by turning them anti-clockwise.

To tighten the blades, or move them closer against the cutting bar. Tighten both

cutting bar adjustment knobs equally turning them clockwise.

If the mower is only cutting on one side, the cutting bar may be out of alignment

with the blade reel. Therefore, tighten the side of the mower that is not cutting to

bring it back into alignment.

If the mower is hard to push and the blades barely turn, the cutting bar may be

over-tightened against the blade reel .

If the blade reel spins freely and doesn't make contact against the cutting bar, or

the mower isn't cutting grass well, the cutting bar may be too loose against the

blade reel.

GRASS CATCHER

It is possible to purchase a grass catcher for the Ozito Hand Lawn Mower. This

accessory can be purchased from your local Bunnings Warehouse. Accessory

model no. ACLMP-001.

1. While using the hand lawn mower always wear substantial footwear and long trousers.

2. Make sure the lawn is clear of sticks, stones, wire and debris; that could be thrown

by the blades.

3. Before using the mower and after any impact, check for signs of wear or damage

and repair as necessary.

4. Sharpen worn or damaged blades.

Walk at a Good, Steady Pace.

With a hand lawn mower, the rotation of the wheels turn the blade reel. The mower will

tend to bind up and skid if it is moving at too slow a pace. The faster the wheels are

travelling, the faster the blade reel turns. Therefore, moving at a comfortably quick

walking pace will achieve the best results.

Overlapping Rows.

When mowing a lawn, slightly overlap the row that has already been mowed. This will

make the force required to move the mower easier because less grass is being mowed

at one time. Overlapping rows will also ensure a neat cut by removing grass that may

have been missed on the previous row.

Don't let the Grass get too Tall

Hand lawn mowers are harder to push when the grass gets too tall, therefore it is

recommended to mow on a weekly basis.

Hand Lawn Mowers don't Mow Tall Weeds.

The hand lawn mower will tend to roll over tall weeds without cutting them. This

includes tall weeds that are more than six inches, and things like dandelions and docs.

If the desired lawn to be mowed has a significant weed infestation, enquire at your

local Bunnings store how to rectify the problem, or as an alternative, rent a petrol

powered mower to gain control of the lawn. Hand lawn mowers are designed to cut

lawns in reasonable condition.

The Metal Guard protects your Garden

The metal guard does not only protect your hands and feet, but also the garden. The

hand lawn mower can be pushed right up to flowers and shrubs without damaging

them. This feature means the hand lawn mower can cut the edges of the lawn where

garden plants exist minimising any potential damage.

PREPARATION

HOW TO MOW

Before taking the time and effort to sharpen the blades, make sure that it needs

sharpening. Most of all issues can be solved by ensuring the blades are properly

adjusted (ADJUSTMENTS section).

1. Prop up the hand lawn mower so that the blade reel can be rotated by turning

the wheels.

2. Check the blades for nicks and burrs. If any damage is found, it usually can be

removed by holding a file flat against the blade and pushing away from the edge.

3. Examine the cutting bar. It should just meet the blades along their entire length.

(To make sure the cutting bar is located correctly, grasp a wheel and turn it

forward; you should hear a whispery sound as the blades pass the cutting bar).

4. If the bar is out of alignment, adjust using the adjustment knobs on the ends of

the bar (ADJUSTMENTS section).

5. Using your fingers or a soft paintbrush, cover the blades with a thin, even coat

of automotive valve-grinding compound (available at automotive stores).

6. Grasp a wheel and turn it slowly backward so the grinding compound is squeezed

between the blades and the cutting bar, thereby sharpening both cutting edges as

they pass each other. Be sure that each blade touches the bar as the wheel is rotated.

7. Make about a dozen turns, applying more grinding compound when necessary.

8. Examine the blade edges. If they look sharp, wash off all the valve compound

with soapy water and rinse thoroughly.

9. Test for sharpness. Insert a sheet of newspaper between the blades and the

cutting bar, and rotate the reel forward. When the blades cut the paper as

easily and as cleanly as a sharp pair of scissors would, the task is complete.

Note: After each use, hose the mower clean and wipe it dry. Wipe all the metal

parts with a thin film of WD-40 or mineral oil.

Warning! Sharpen blades only by hand. The heat generated by a power

grinder or an electric drill with a grinding wheel attached can destroy the

temper of the metal. Wear thick leather gloves when handling the blade reel

and cutter bar and make slow, precise movements to avoid cutting or jamming

your fingers.

Keep all nuts, bolts and screws tight to be sure the mower is in a safe working condition.

Replace worn or damaged parts for safety.

Be careful during adjustments of the hand lawn mower to prevent entrapment

of the fingers between moving blade and fixed parts of the machine.

SHARPENING THE BLADE

MAINTENANCE

CONTENTS

OZITO INDUSTRIES PTY LTD

AUSTRALIA (Head Office)

5 Chestnut Crt, Dingley, Victoria, Australia, 3172

Telephone: 03 9558 3999

Facsimile: 03 9558 0583

www.ozito.com.au

1 x Hand Lawn Mower LMP-301

1 x Lower handle

1 x Upper handle

2 x Handle uprights

6 x Handle bolts, nuts & washers

1 x Instruction manual

WARRANTY

THIS WARRANTY FORM AND CONFIRMED BUNNINGS REGISTER RECEIPT SHOULD

BE RETAINED BY THE CUSTOMER AT ALL TIMES

The warranty is only made available by returning the product to your nearest

Bunnings Warehouse with a confirmed Bunnings register receipt.

PURCHASED FROM: ________________________________________________

DATE PURCHASED: _________________________________________________

2 YEAR REPLACEMENT WARRANTY

Your Ozito tool is guaranteed for a period of 24 months from the original date of

purchase and is intended for DIY (Do it yourself) use only.

WARNING

The following actions will result in the warranty being void.

• Professional, Industrial or high frequency use.

• If the tool shows signs of damage or defects caused by or resulting from abuse,

accidents or alterations.

• If the tool is disassembled or tampered with in any way.

Note: Warranty excludes consumable parts such as blades, blade reels,

and other accessories

YOUR WARRANTY FORM SHOULD BE RETAINED

BY YOU AT ALL TIMES.

SHOULD YOU HAVE ANY QUESTIONS PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY OR

REPAIR PLEASE TELEPHONE OUR CUSTOMER

SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER

AND DATE OF PURCHASE AVAILABLE. AN OZITO CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS

YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.

Otros manuales para LMP-301

Tabla de contenidos

Otros manuales de Cortacésped de Ozito

Ozito

Ozito ELM-1545 Manual de usuario

Ozito

Ozito PXCLMK-018 Manual de usuario

Ozito

Ozito PXCLMLTC-418U Manual de usuario

Ozito

Ozito XU1 XLMS-018 Manual de usuario

Ozito

Ozito PowerXChange PXCBLTLMC-218 Manual de usuario

Ozito

Ozito Power X Change PXCPM-018 Manual de usuario

Ozito

Ozito ECOMOW Manual de usuario

Ozito

Ozito Power X Change PXCLMK-218E Manual de usuario

Ozito

Ozito PXCLMS-018 Manual de usuario

Ozito

Ozito ELM-1800 Manual de usuario

Ozito

Ozito Power X Change PXCLES-018 Manual de usuario

Ozito

Ozito LWE-1400 Manual de usuario

Ozito

Ozito PXC PXBSPMS-0182 Manual de usuario

Ozito

Ozito PowerXchange PXLMTS-0182 Manual de usuario

Ozito

Ozito ELM-1000 Manual de usuario

Ozito

Ozito PXSPSDMS-0182 Manual de usuario

Ozito

Ozito LML-036 Manual de usuario

Ozito

Ozito Power X Change PXBSDMS-0182 Manual de usuario

Ozito

Ozito ECOMOW ELM-1536 Manual de usuario

Ozito

Ozito PXCLMK-218 Manual de usuario

Ozito

Ozito LMP-301 Manual de usuario

Ozito

Ozito ELM-1230 Manual de usuario

Ozito

Ozito Power X Change PXCLMK-418 Manual de usuario

Ozito

Ozito ELM-300 Manual de usuario

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

MTD

MTD 795, 792, 791, 790 Manual de usuario

Toro

Toro Groundsmaster 3505-D Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

MTD

MTD 126-220-000 Manual de usuario

Toro

Toro 74806 Manual de usuario