OVE SIERRA 48 Manual de usuario
1
SIERRA 48
Opening
470
[18 1/2]
570
[22 7/16]
CSA Markings
2000
[78 3/4]
1219
[48]
Measures: millimeter [inch]
2015-12-30 2800 Etienne Lenoir, Laval
Quebec H7R 0A3 Canada
Purchase date: _________________________ Product Tracking Reference: ________________________
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at
1-866-839-2888, 9 a.m. - 5 p.m., EST, Monday - Friday
2
TABLE OF CONTENT
PACKAGE CONTENT.......................................................................................................................................... 4
HARDWARE CONTENT...................................................................................................................................... 5
TOOLS REQUIRED............................................................................................................................................. 5
SAFETY INFORMATION..................................................................................................................................... 6
PREPARATION.................................................................................................................................................... 6
SHOWER REVERSIBILITY.................................................................................................................................. 7
WALL TO WALL MEASURES............................................................................................................................. 7
BASE INSTALLATION GUIDELINES (OPTIONAL)............................................................................................ 8
WALL TRACK INSTALLATION........................................................................................................................... 9
FIXED PANEL INSTALLATION.......................................................................................................................... 10
SUPPORT BAR INSTALLATION....................................................................................................................... 11
DOOR PANEL INSTALLATION......................................................................................................................... 12
HANDLE INSTALLATION & SEALING.............................................................................................................. 13
CARE AND MAINTENANCE............................................................................................................................. 14
LIMITED 5 YEARS WARRANTY........................................................................................................................ 14
3
PACKAGE CONTENT
B
DE
C
V
F
L
G
I
H
J
M
R
N
Q
U
T
O
P
4
PACKAGE CONTENT
PART# DESCRIPTION QTY CODE
B Aluminum wall track 1 99STR3107-WM
C Fixed glass panel 1 99SG3112-WM
D Support bar’s anchors 2 99SGC3106-WM
E Shower door stoppers 2 99SDS0005-WM
F Support bar 1 99SGS1016-WM
G Fixed panel’s brackets 2 99SGC3107-WM
H Door rollers 2 99SWE3103-WM
I Anti-jump pegs 2 99SWE3107-WM
J Door panel 1 99SGD0010-WM
L Short seal strips 2 99SRU0063
M Door handle 1 99SHA3104-WM
N Fixed panel’s bottom seal strip 1 99SRU0041
O Door bottom seal strip 1 99SRU0028
P Glass panels vertical seal strips 2 99SRU0026
QSliding door guide (with its rubber tting) 1 99SGC1018-WM
R Door panel vertical seal strip 1 99SRU0027
T Decorative end caps 2 99SHW0101-WM
U Decorative aluminium track 1 99STR1062-WM
VAluminum prole 1 99STR1044-WM
W Hardware content 1 99SHW0110-WM
5
HARDWARE CONTENT
CC
FFEE
AA
GG
BB
Screw
ST5x25mm
2+1
Wall Anchor
ø8x30mm
7+2
Screw
ST5x35mm
4+1
Cap
3x Fitting
3x
TOOLS REQUIRED
Pencil Screwdriver Level
Measuring Tape Silicone Rubber mallet Cutter
Safety glasses
Screw
ST5x30mm
3+1
DD
Screw
ST4x12mm
3+1
HH
Cap
4x
Allen key
2.5mm & 5mm 5mm Bit socket
Drill with ceramic tile bits
ø3mm (1/8in) & ø4mm (3/16in) & ø8mm (5/16in)
6
Please read and understand this entire manual before attempting to assemble, operate
or install the product.
WARNING
• Distributor is not responsible for any damage to the unit or personal property caused
by improper installation. If you disregard instructional warnings, you will void your
warranty and possibly deal with water damage.
CAUTION
• Carefully remove product from packaging and keep packaging until installation is
complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation,
please contact customer service at the number provided in this guide.
• Install the shower on a oor that is level and able to accommodate the weight of the
unit and an occupant.
• Please, consult local building codes and compliance standards prior to installation
and ensure conformity.
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time 60min.
Handle the tempered glass with caution! Improperly handling the glass can
cause it to break suddenly in small pieces (never in pointed fragments).
Dot NOT put glass panels on hard surfaces, always work on clean and soft
surface (e.g. towel). Shattering may occur otherwise!
HEAVY PRODUCT! You will need at least two people to install this
unit properly.
7
• This instruction is drawn up for an opening from right to left (see illustration B).
• For an installation from left to right (see illustration A), use the same instructions, but switch around the
panels: mirror effect.
SHOWER REVERSIBILITY
A B
WALL TO WALL MEASURES
• Measure the thickness of your tiles on either side before installing the metal tracks. A thicker tile will limit
your space to install the shower panels.
• Make sure to have a tile to tile distance (D) between 1173mm (46 3/16 in) min. and 1188mm (46 3/4 in)
max. (see image).
Make sure to have a distance (D) from the left side tile
to the right side tile:
D Min: 1173mm (46 3/16 in)
D Max: 1188mm (46 3/4 in)
If D < 1173mm (46 3/16 in) you can cut the support
bar to adequate size. Only cut the side with no holes!
Install the shower head on the door’s side! This will reduce the risk of leaking.
8
BASE INSTALLATION GUIDELINES (OPTIONAL)
1 2
4
Tile Wall
Studs
Drywall
Silicone
5
Shower Base
3
Shower Base
Cement
Floor
Wood shim
Flange
Stud
Drywall
Silicone
Flange
9
1. Ensure the base and walls are leveled. Place the metal track (B) approximately 30mm (1-1/4in) from the
edge of the base to the center of the metal track. Ensure the metal track (B) is leveled, then mark the holes
clearly on the wall.
2. Remove track and drill pilot holes in the marked locations with a Φ8mm (5/16in) drill bit.
3. Insert the wall anchors (AA) using a rubber mallet until the wall anchors are ush with the wall.
4. Replace and secure the metal track (B) with screws (BB). Do not overtighten.
WALL TRACK INSTALLATION
Φ 8mm
5/16in
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
AA
2
3
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
30mm
1 1/4in
BB
4
B
1
10
1-2. Insert the xed panel’s bottom seal strip (N) at the base of the xed glass panel (C). Cut the surplus part with a
cutter to size, about 40mm from the panel’s edge.
3. Place the sliding door guide (Q) on the base.
4. Mark the positions of holes of the sliding door guide (Q) with a pencil, and drill pilot holes with a ø4mm (3/16in) drill
bit.
5. Fix the sliding door guide (Q) with the screw (CC). Ensure the plastic gasket in the guide is in place as it protects
the xed glass panel.
6-7. Place the xed glass panel (C) into the wall track (B) and the sliding door guide (Q).
Note: The wall track (B) allows you to adjust the position of the xed glass panel (C). Adjusting the depth and/
or giving the xed glass panel a slight angle allows for precise alignment with the door.
8. Drill the xed panel (C) with Φ 3mm (1/8in) in 3 places.
9. Secure the wall track (B) using screws (DD), ttings (FF) and caps (EE).
FIXED PANEL INSTALLATION
40mm
N
N
C
2
760mm
30mm
543mm
Q
3
Φ4mm
3/16in
4
CC
56
EE
DD
FF
9
1
Q
B
C
C
N
Q
7
C
N
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws
100mm
8
Φ3mm
1/8in
Tabla de contenidos
Idiomas:
Otros manuales de Cabina de ducha de OVE
OVE
OVE ESTERO 48 Manual de usuario
OVE
OVE MELBA 32 Manual de usuario
OVE
OVE OWS-315G Manual de usuario
OVE
OVE MARISSA 36 Manual de usuario
OVE
OVE BREEZE & PARIS WP 32 Manual de usuario
OVE
OVE SHEELA 48 Manual de usuario
OVE
OVE OWS-106 Manual de usuario
OVE
OVE OWS-103 Manual de usuario
OVE
OVE EMILY SWIFT 36 Manual de usuario
OVE
OVE SAVANNAH 658783 Manual de usuario
OVE
OVE SWIFT INSTALL 36 Manual de usuario
OVE
OVE SHELBY GP 60 Manual de usuario
OVE
OVE AMBER Manual de usuario
OVE
OVE KELSEY 72 Manual de usuario
OVE
OVE HARVARD 48 Manual de usuario
OVE
OVE CAMILLA 48 Manual de usuario
OVE
OVE SHELBY 60 667453 Manual de usuario
OVE
OVE SWIFT INSTALL 34 Manual de usuario
OVE
OVE KELSEY 48 Manual de usuario
OVE
OVE SHELBY SIDE PANEL 32 Manual de usuario
