OTS ET1111 Series Manual de usuario

V2.3

ET1111 series (short version)

Industrial Grade Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter

This quick start guide describes how to install and use the Industrial Media Converter. This is the Media Converter of

choice for harsh environments constrained by space.

Physical Description

The 100Base-FX connections, Terminal Block and Power Inputs

Model Number:

ET1111-X-MT

Top panel－The fiber port(s) for 100Base-FX connections

The 100Base-FX Connections

The TX (transmit) port of device I is connected to the RX (receive) port of device

II, and the RX (receive) port of device I to the TX (transmit) port of device II.

X value:

A for Multimode fiber

B for Singlemode fiber

FIBER

Connector

SC Optical Connector

X value:

G for Multimode fiber

H for Singlemode fiber

FIBER

Connector

ST Optical Connector

The WDM 100Base-FX Connections

Only one single-mode optical fiber is required to transmit and receive data.

X value:

C and D for Multimode fiber

H and F for Singlemode fiber

FIBER

Connector

SC Optical Connector

X value:

I and J for Multimode fiber

K and L for Singlemode fiber

FIBER

Connector

ST Optical Connector

Bottom panel－Ethernet Port and Power Input

Ethernet Port

Power Input Assignment

NETWORK

RJ45 Connector

Top Panel

Bottom Panel

*There will be no “TX” and

“RX” in single fiber condition.

V2.3

ET1111 series (short version)

Industrial Grade Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter

12VDC

GND

Terminal Block

12V

Interface

The 10/100Base-TX Connections

The following lists the pinouts of 10/100Base-TX ports.

The Port Status LEDs, dimension drawing for the Micro unit

Functional Description

•

Converts 10/100Base-TX to 100Base-FX

•

Full/Half duplex, Auto-Negotiation

•

Singlemode or Multimode fiber operation

•

Single or Dual-core fiber with SC or ST connectors

•

MDI/MDI-X Auto-Crossover supported

•

Sleek Microtype design, fits within most camera housing

•

Plug-and-Play

•

12VDC Terminal Block Power inputs

•

-10°C to 60°C (14°F to 140°F) operating temperature.

Regular Ports

Uplink Port

Output Transmit Data +

Input Receive Data +

Output Transmit Data -

Input Receive Data -

Input Receive Data +

Output Transmit Data +

Input Receive Data -

Output Transmit Data -

LED

State

Indication

PWR

Green

Power on.

Off

Power off.

FX SPD

Green

100Base-FX

Off

10Base-FX

FX LINK

Steady

Avalid network connection established

Flashing

Transmitting or receiving data.

ACT Stands for Activity.

SPD

Yellow

100Base-TX

Off

10Base-TX

LINK/ACT

Steady

Avalid network connection established

Flashing

Transmitting or receiving data.

ACT Stands for Activity.

V2.3

ET1111 series (short version)

Industrial Grade Microtype 10/100Base-TX to 100Base-FX Ethernet Media Converter

Assembly, Startup, and Dismantling

Installation

•

Installation: Mount the Micro-type unit onto a fixture, or camera housings, e.g. a plank, (either on the wall or on

a flat surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in position.

•

Startup: Connect the supply voltage to start up the Media Converter via the terminal block.

•

Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.

Manual Earth Green manual is available on our website www.ot-systems.com

Otros manuales de Convertidor de medios de OTS

OTS

OTS ET1212H-S-DR Manual de usuario

OTS

OTS ET1212PpH-SA-DR Manual de usuario

OTS

OTS ET1111PpH-S-DR Manual de usuario

OTS

OTS EC1212-X-MINI Series Manual de usuario

OTS

OTS FT010AB Series Manual de usuario

OTS

OTS FT100-SSTSA Manual de usuario

OTS

OTS ET1212H-S-MT Manual de usuario

OTS

OTS FTD100Micro-SST Manual de usuario

OTS

OTS ET1111PpH-S-DR Manual de usuario

OTS

OTS FT800-SSTSA Manual de usuario

OTS

OTS ET1212-S-DR Manual de usuario

OTS

OTS ET1212Pp-S-DR Manual de usuario

OTS

OTS ET1212Pp-S-DR Manual de usuario

OTS

OTS EC1111-X-MINI Series Manual de usuario

OTS

OTS FT200-SSTSA Manual de usuario

OTS

OTS ET1111P Series Manual de usuario

OTS

OTS ET1212Pp9H-S-DR Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario