OTEKsys OT15 Instrucciones de instalación y funcionamiento
U
Us
se
er
r
M
Ma
an
nu
ua
al
l
/
/
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
G
Gu
ui
id
de
e
M
Mo
od
de
el
l
N
No
o.
.
O
OT
T1
15
5/
/C
CT
T1
15
5
Warning! It will cause malfunction if the monitor is operating with unspecified power supply unit
or incorrect power voltage. Do not exposure this unit in the rain or moisture environment to reduce the
risk of fire or electric shock.
Content:
I. Introduction.............................................................................................................................1
Features....................................................................................................................................1
Unpack the monitor .................................................................................................................2
Ⅱ. Installation...............................................................................................................................3
I/O placement...........................................................................................................................3
To PC .......................................................................................................................................3
Touch driver.............................................................................................................................4
MSR (optional)........................................................................................................................6
Second Display installation (optional).....................................................................................6
Control Buttons........................................................................................................................8
Structure of OSD settings.........................................................................................................9
Ⅲ. For your safety........................................................................................................................10
Ⅳ. Support timing........................................................................................................................10
Ⅴ. Mechanical dimension............................................................................................................10
Ⅵ. FCC Warning Statement........................................................................................................11
Ⅶ. Product General Specification...............................................................................................12
Version. 1.0 1
I. Introduction
OT15/CT15 is color TFT LCD monitor, integrate with ELO or TWN resistive touch, suitable for many
types of application. Optional MSR and 2nd display, please contact our regional distributor for further
information.
¾Features
-Optimal display resolution 1024 * 768
-VESA 75 * 75 mm wall mount standard
-Durable and sturdy base design
-Optional 3 tracks Magnetic Strip Reader (MSR)
-Optional variety of 2nd display (7”/8.4”)
-Adjustable viewing angel freely up to 90 degrees horizontally
-Low power consumption only 20W with CCFL backlight
-Packing box to be recycled as a free storage cabinet
Version. 1.0 2
¾Unpacking the monitor
-Put the monitor on a clean surface, make sure the box in upright position.
-Remove packing materials from inside of box.
Check accessory
Please make sure all the accessory are included:
Standard Items
a. b. c.
d. e. f.
Optional Items
a. b.
a. MSR b. 2nd display ( 7” or 8.4” )
a. LCD Monitor b. VGA cable
c. Touch driver / User Manual CD d. Touch cable (USB or RS232)
e. Power adaptor f. Power cable
Version. 1.0 3
Ⅱ. Installation
¾I/O placement:
1 DC JACK 2 DVI
3 VGA 4 USB B Type
5 Dual USB A Type 6 RS232
7 RJ45(RS232)
8. DC JACK 9. VGA
10. USB B Type 11. RS232
¾To PC:
1. Connect VGAcable from monitor to PC
2. Connect USB touch cable to PC
3. Connect DC plug to monitor and the other side to wall outlet
Version. 1.0 4
¾Touch Driver installation：
TWN Touch：
1. Double click “setup.exe” from driver menu 2. Click “next” from welcome window
3. Click “next” from choose destination location window 4. Click “next” from ready to install the
program
5.Click“next”fromsetuptype 6.Click“finish”whensetupcompleted
Calibration procedures:
1. Double click “POS Touch+” icon to run calibration function
2. Follow 9 points linearity calibration procedures and save the data
3. Follow free draw calibration
4. Exit calibration menu
5. Reboot PC
Version. 1.0 5
ELO Touch：
1.Install ELO Touchscreen Driver 2. Click “Unzip” from WinZip
Self-Extractor-ELO_v463.exe
3. Click “next” from Select Language 4.Select Install Serial or USB Touchscreen
Driver
5.Click-on “Yes” after Installation 6.Click-on“Finish”
Calibration procedures:
1. Double click “Elo Touchscreen” icon to run calibration function
2. Follow 3 points linearity calibration procedures and save the data
3. Follow free draw calibration
4. Exit calibration menu
Version. 1.0 6
¾MSR installation (optional)：
Components of MSR Kit:
1. Slide the MSR into the right position of the System.
2. Fasten the screws (x2).
¾Second Display installation (optional)：
To install the Second Display, please open the VFD cover first.
Components of Second Display Kit with power adapter:
1. Fix the parts of Second Display modules as steps ❶Æ❷Æ❸ as above left
picture shows. (detail steps as below)
❶Put the second display upside down.
❷Place the metal bracket onto the rear side of the second display
and fasten the screws (x4) to fix metal bracket with the system.
Version. 1.0 7
❸Align the plastic bracket into the right position of metal bracket.
(a) Align the plastic bracket onto the metal bracket.
(b) Push to left until the click sound appears.
2. Fasten the screw (x1) to fix the platic bracket and Second Display module
with metal bracket.
3. Slide the Second Display Module into the slot.
4. Fasten the scrws (x2) to fix the Second Display moudle with the System.
5. Connect the VGA cable to the Second Display Module and the System.
6. Connect the DC piug to the Second Display Module and the other side to wall
outlet.
7. Finish
Version. 1.0 8
¾Control Buttons
Power Use the power switch to turn the power ON or OFF. We recommend to turn your
system power on first, then the LCD monitor.
Auto Adjusting
a.) Pressing to execute AUTO-Adjusting function. This function will set the
monitor display area to the optimal position.
b.) Sometimes this function can't achieve the optimal effects. Please follow the
manual adjusting procedure.
Up
Down
a.) When OSD mode is activated (When “MENU” key is pressed). The two keys
areusedtoselecttheadjustmentitems.
b.) When adjustment item is selected, the two keys are defined to decrease or
increase the value of each selected item.
Menu
When the light bar move other item, the key are used to select it, and read to adjust.
Press the MENU key to activate the On Screen Display (OSD). Press twice to turn
off the OSD. After 30 sec idle time, the OSD screen will automatically turn off.
Version. 1.0 9
¾Structure of OSD settings:
First Level Second Level Third
Level Operating Procedure
Auto Adjust Press “UP” or “DOWN” to adjust H-phase &
H-position & V-position clock automatically.
Luminance Brightness
Contrast
Exit
Press “UP” key to increase brightness, “DOWN” key to
decrease brightness.
Press “UP” key to increase contrast, “DOWN” key to
decrease contrast.
Geometry
H. Position
V. Position
Clock
Phase
Exit
Press “UP” key to shift screen right, “DOWN” key to
shift screen left.
Press “UP” key to shift picture upward, “DOWN” key
to shift picture downward.
Adjust sampling clock of analog to digital converter
until clock is equal to pixel frequency of video input.
By varying this “UP” “DOWN” control the exact
sampling time within the pixel can be adjusted.
9300K
6500K
5800K
User Preset
Red
Green
Blue
Exit
Color
Exit
Press “UP” or “DOWN” to choose three types of color
temperature 9300°k, 6500°k and user define.
OSD
H. Position
V. Position
OSD Timeout
Exit
Adjust OSD frame horizontal location, press “UP” key
to shift frame right, “DOWN” key to shift frame left ,
timeout and preset OSD.
Adjust OSD frame vertical location, press “UP” key to
shift frame upward, “UP” key to shift frame
downward , timeout and preset OSD.
Language
English
French
German
Italian
Spanish
Japanese
T. Chinese
S. Chinese
Press “UP” or “DOWN” to choose any one of the
following language, English, French, Germany, Italy,
Spain , Japanese, Traditional Chinese and Simplified
Chinese.
Recall Color Recall
Recall All
Exit Recall the default value.
Miscellaneous
Sharpness
Display
Information
Exit
Press “UP” key to increase sharpness, “DOWN” key to
decrease sharpness.
Main
Menu
Exit
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Monitor de OTEKsys
