osprey video 4K-SC Manual de usuario
HARDWARE ENCODER
4K60 10-bit
H265 HEVC | H264 AVC
QUICK START GUIDE
Models:
4K-SC
UHD-SC
TALON Encoder 1 www.ospreyvideo.com
© 2023 Osprey Video. All rights reserved. Osprey® is the registered trademark of Osprey Video. Any other
product names, trademarks, trade names, service marks, or service names owned or registered by any other
company and mentioned herein are the property of their respective companies. No part of this specification
may be reproduced, transcribed, transmitted or stored in a retrieval system in any part or by any means
without the express written consent of Osprey Video. Osprey Video reserves the right to change any
products herein at any time and without notice. Osprey Video makes no representations or warranties
regarding the content of this document and assumes no responsibility for any errors contained herein.
TALON Encoder 2 www.ospreyvideo.com
Hardware Description
Power
Switch
Power / Boot
LED
Status LED’s
Multi Function
Button
Status Display
(4K-SC only)
1 GigE
Ethernet
USB 3.0
12G-SDI Loopout
(4K-SC only)
12G-SDI
Input
HDMI 2.0
Input
(4K-SC only)
12VDC Power
Power Switch Physical ON/OFF Switch
Power / Boot LED Red at Power On, turning blue once booting process is complete
Status LED’s Status LED’s that can be configured in Talon UI – System –IO Configuration
Multi Function Button Start, Stop, Factory Reset (Hold until message “Release Button ….” appears on the display)
Status Display Displayed information can be configured in Talon UI –System –IO Configuration
1 GigE Ethernet One Gigabit Ethernet RJ45 connection
USB 3.0 Save to File for an MP4 copy of the live stream
12G-SDI Loopout Loopout of the SDI Input
12G-SDI Input SDI Input up to DCI60 on 4K-SC and up to UHD60 on UHD-SC
HDMI 2.0 Input Non-HDCP compliant HDMI 2.0 input
12VDC Power Locking 12V Power Input
TALON Encoder 3 www.ospreyvideo.com
Connecting your Talon Encoder
Important! Talon Encoders ship from the factory in DHCP mode. Please ensure your host PC and Talon are connected to the same
network supporting DHCP.
1. Connect Talon to your network using a CAT5 or faster Ethernet cable
2. Connect Talon to power using the supplied 12V adapter. Ensure the barrel connector is fully engaged and locked
3. Power up Talon with the front power switch
•Red “Power” LED will turn blue once the booting process is complete
•The assigned IP address will display (4K-SC only). This might take up to a minute
4. Connect to Talon from your host PC
•Option #1: Type the IP address into your web browser
•Option #2: Download “Boss Pro” from www.ospreyvideo.com to find all Talon on your network
5. Default login credentials
•Username: admin
•Password: osprey
Setting up Talon without Network access or with Network without DHCP server using APIPA
1. Verify your PC is set to Automatic IP
2. Connect Talon direct to your PC with an Ethernet cable (ensure the PC doesn’t have network connection though Wifi, USB, etc)
3. Follow above instructions beginning with step 2.
APIPA - Automatic Private IP Addressing (APIPA) is a feature of Windows-based OS -- included since Windows 98 and Windows ME
-- that enables a Dynamic Host Configuration Protocol client to automatically assign an IP address to itself when there's no DHCP
server available to perform that function.
TALON Encoder 4 www.ospreyvideo.com
Configuring your Talon Encoder
System
Device
•Device name
•Username and password settings
•FTP Settings
•Remote Start Enable
•Video Preview Enable
•Device Info
Network
•Network Settings
Date & Time
•NTP Server
•Timezone
IO Configuration
•Assignment for front panel LED’s
•Customization for display and button
TALON Encoder 5 www.ospreyvideo.com
Configuring your Talon Encoder
Channels
Channel 1
•Output delivery protocol settings (needs to be set first as this will change the available video and audio options)
•Video and Audio encoding settings
•Archiving options
Status
•Input and Stream Status Information
TALON Encoder 6 www.ospreyvideo.com
Configuring your Talon Encoder
Start
•Start encoding (the front panel button can also be configured to start the encoder)
Stop
•Stop encoding (the front panel button can also be configured to stop the encoder)
Support
•Firmware updates
•Restore Options
•Contact Information
•Licensing information
Dashboard
•Hardware, Input and Network Overview
•Stream Status
•Input Video Preview
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de osprey video
