10
Orqa FPV.ONE PILOT User Manual, Rev.1.2
©2022. Orqa Ltd.
DVR
Integrated Digital Video Recorder (DVR) enables high definition recording of the
video and audio from any of the inputs.
To use the DVR, the micro SD
card must be inserted in the
dedicated slot in the faceplate.
Insert the micro SD card with the
contacts facing up. Inserting the
micro SD Card incorrectly might
result in getting the card stuck in
the goggles.
To start recording, press the “DVR Quick Record” button on the top side of the
goggles. The button is marked with the red dot. DVR starts recording instantly
from the input that is shown on the screen. During the DVR recording, the red
symbol is blinking in the top right corner of the screen.
Note that DVR will not record any of the goggle’s OSD features which might be
shown on screen during recording. OSD features generated by a receiver (e.g.,
RapidFire RSS bars) will be recorded.
When recording, the DVR saves data onto the inserted micro SD card.
Eventually, all the available memory space will be used and there will be no free
space for the DVR to store the data. When there is no more available space on
the micro SD card, the DVR will stop recording.
In order to prevent the DVR from stopping the recording because of insufficient
storage space, the “Auto Delete” option can be used. This option allows the DVR
to delete the oldest recorded file on the inserted micro SD Card to free some
space for the current recording.
When the “Auto Delete” option is turned OFF, the DVR will record until all the
available space on the micro SD card is used.
