ORQA FPV.ONE Manual de usuario

Orqa FPV.ONE User Manual, Rev.1.2

FPV VIDEO GOGGLES

User Manual

Rev. 1.2 | December 2019.

2 
Orqa FPV.ONE User Manual, Rev.1.2 
©2019. Orqa Ltd. 
TABLE OF CONTENTS
 
 
PACKAGE CONTENTS.....................................................................................3 
GETTING TO KNOW THE GOGGLES............................................................ 4 
CONTROLLING THE GOGGLES ....................................................................7 
NAVIGATING THE MENUS ..............................................................................8 
RECEIVER SETTINGS.......................................................................................9 
INPUT SOURCE................................................................................................10 
IMAGE SETTINGS............................................................................................11 
STAND BY..........................................................................................................12 
FEATURES.........................................................................................................13 
BATTERY...........................................................................................................14 
ABOUT................................................................................................................15 
DVR......................................................................................................................16 
VIDEO PLAYBACK ..........................................................................................19 
CONNECTIONS PINOUT ................................................................................20 
ORQA ORIGINAL BATTERY..........................................................................21 
CHARGING THE BATTERY ...........................................................................22 
TECHNICAL SPECIFICATIONS ....................................................................23 
 
 

Orqa FPV.ONE User Manual, Rev.1.2

PACKAGE CONTENTS

CARRYING CASE

GOGGLES

FOAM PADS

BATTERY

OPTICS CLEANING

CLOTH

MICRO HDMI –HDMI CABLE

(OPTIONAL)

Orqa FPV.ONE User Manual, Rev.1.2

GETTING TO KNOW THE GOGGLES

1. Power On/Off

2. Defogging Fan

3. Right Menu Navigation

4. Left Menu Navigation

5. Battery Check

6. DVR Quick Record

7. Channel Down

8. Channel Up

9. Defogging Air Intake

10. Cooling Air Exhaust

11. Left IPD Adjust Wheel

12. Right IPD Adjust Wheel

13. Cooling Air Intake

Orqa FPV.ONE User Manual, Rev.1.2

GETTING TO KNOW THE GOGGLES

14. Audio Out / Mic In

15. Head Tracker Output

16. Receiver Bay

17. Power Connector

18. AV Input

19. MicroHDMI Input

20. Secondary Bay

21. Module Interface FFC

Orqa FPV.ONE User Manual, Rev.1.2

GETTING TO KNOW THE GOGGLES

22. Micro SD Card Slot

23. Diopter Slot

24. Stand-By Sensor

Orqa FPV.ONE User Manual, Rev.1.2

CONTROLLING THE GOGGLES

Power Button

Press the Power Button to power the goggles On or Off .

There are different power-on modes. Check page 13 for more information.

Fan Button

To prevent the lenses from fogging due to high humidity or sweat, use the

defogging fan. Press the Fan Button to turn the fan on or off .

Right-hand Joystick

Use the Right-hand joystick to access the DVR menu .

Left-hand Joystick

Use the Left-hand Joystick to access the main menu .

Battery Check

Press the Battery Check Button to show the battery status .

DVR Quick Record

Press the DVR Quick Record Button to start/stop recording with DVR .

Channel Down

Press the Channel Down Button to change the receiver channel down .

Additionally, long press this button to change the receiver band.

Channel Up

Press the Channel Up Button to change the receiver channel up .

Additionally, long press this button to change the receiver band.

Orqa FPV.ONE User Manual, Rev.1.2

NAVIGATING THE MENUS

There are two main menus that are accessible via the two corresponding

joysticks on the top side of the goggles.

The Left-hand joystick controls the main menu. The main menu incorporates

all the main controls and goggles settings.

The Right-hand joystick controls the additional menu which is used mainly to

adjust the Digital Video Recorder and Video Playback settings.

To enter the main or additional menu simply press the corresponding joystick.

Once inside the menu move the corresponding joystick up, down, left or right in

order to select the required setting.

Confirm/save the set value by pressing the corresponding joystick.

To exit the menu, move the joystick to the left or wait for 10 seconds to

automatically exit the menu.

Changes will be saved only if the menu is closed before turning the goggles off.

Orqa FPV.ONE User Manual, Rev.1.2

RECEIVER SETTINGS

In this menu, you can select the receiver module that you have installed into the

main receiver module bay.

In order to control the different receiver modules directly from the goggles, it is

important to select the receiver module that you are using.

Also, by selecting the correct module the goggle’s OSD and module’s OSD will

work together without conflicting with each other.

For example, if RapidFire is selected, you will be able to change the channel by

short pressing the CHANNEL UP or CHANNEL DOWN buttons on the

goggles.

A long press on the CHANNEL UP or CHANNEL DOWN buttons changes

the band on the receiver module.

Additionally, by entering the channel table in the menu you can select the desired

frequency of the RapidFire receiver module.

Please note that RapidFire firmware must be updated to at least version 1.3. to

have the full functionallity with the Orqa goggles.

Orqa FPV.ONE User Manual, Rev.1.2

INPUT SOURCE

INPUT SOURCE is used to set the goggles video input source.

You can select between: Receiver, HDMI, AV in and AUTOMATIC.

AUTOMATIC setting will bring up the image from the input you feed to the

goggles.

When automatic mode is on, the default setting is Receiver, but as soon as you

plug in another source it will automatically switch to that input.

If an HDMI source with an unsupported signal is connected, the “Unsupported

HDMI Input” message will appear on-screen.

Automatic setting priority

1. HDMI

2. AV in

3. RX

Please note that the splash screen

with the Orqa logo will be displayed if

there is no valid input signal present.

Otros manuales para FPV.ONE

Tabla de contenidos

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario