Orphek HELIX 5000 Manual de usuario
ORPHEK HELIX 5000
INSTALLATION GUIDE
MAINTENANCE
It is recommended to clean the pumps every 3 months. Check and clean the
impeller, and if necessary soak the pump and impeller in white vinegar to
dissolve any calcium deposits.
WARRANTY POLICY
Orphek warrants this product to the original purchaser against defective
material and workmanship that occurs during normal use of the body for
two years and one year warranty on the pump. Company will, at
company’s option, either repair or replace without charge.
PRODUCTS COVERED BY WARRANTY
All Orphek equipment is covered by warranty from the date of purchase.
Exclusions
Damage resulting from accident, misuse, lack of reasonable care,
subjecting the product to abnormal working condition or any other failure
not resulting from defects in materials or workmanship.
Damage caused by tampering, modification or attempted repair by anyone
other than the company.
Transfer of products to someone other than the original purchaser.
Model
Orphek Helix 5000
Foot Print/Height
370*320*/545mm(14.43”x12.48”/21.25”)
Chamber Diameter
220m (8.58”)
Outlet Diameter
50mm(1.95”)
Air Intake Max
2400 lph
Tank Size
600-2850L (159-753 gallons)
Pump
DC OP-6500N
Wattage
40 watts at full rpm (4.0 amps)
Maximum Head Pressure
3.6 meters (11.81’)
Skimmer Installation:
1. Install Reaction Chamber and Baseplate with M6*12 Sunk Screws. Install
Baseplate and Body with M6*12 hand screws.
2. Fix Regulator Bracket with M6*16 Hand Screws, insert Connection Pipe
into elbow outlet pipe, insert T Pipe into Connection Pipe before fix Outlet
Regulator, connect ElbowAssembly with T Pipe finally.
3. Fix Body Sealing Ring inside the neck. Stuff Stopper into the draining pipe
of Collection Cup, Insert Collection Cup into Body, covered with Lid.
4. Put Inlet Sealing Ring into Inlet Pipe and fixed with Water Pump. Insert
Inlet Pipe into Body.
5. Connect Silencer andAir Injector with pump inlet and Air Tube.
Part Names
1. Lid
2. Collection Cup
3. Seal
4. Body seal “O” ring
5. Skimmer body
6. M6 x 12 thumb screws
7. Impeller
8. M6 x 12 screws
9. Reaction chamber
10. Impeller rotor
11. Baseplate
12. Water pump
13. Air venturi assembly
14. Air line
15. Inlet sealing ring
16. Inlet pipe
17. Silencer
18. Outlet regulator valve
19. T Pipe
20. Elbow assembly
21. M6 x 16 thumb Screws
22. Regulator Bracket
23. Connection Pipe
24. Valve
25. DrainPipe
Otros manuales de Filtro de piscina de Orphek
Manuales populares de Filtro de piscina de otras marcas
Davey
Davey EcoPure DEP2140 Manual de usuario
JUWEL Aquarium
JUWEL Aquarium EccoSkim Manual de usuario
POLYGROUP LIMITED
POLYGROUP LIMITED SFS600 Filter System with F600C Pump Manual de usuario
Pentair Pool Products
Pentair Pool Products Filter CFW Series Manual de usuario
Oase
Oase Skimmer 250 Manual de usuario
Oase
Oase CrystalSkim 350 Manual de usuario