Orion 14MDM Manual de usuario
Before operating the unit, please read this manual thoroughly.
Operating Instructions
AC/DC
COLOR TELEVISION
1.
2.
3.
4.
5.
6.
7.
Read Instructions Carefully - All the safety and operating instructions should be read
before the appliance is operated.
Operating Instructions Manual - The manual should be kept for future reference.
Moisture - The unit should be used in such a way that it is protected from moisture.
e.g.condensation, splashed water, etc.
Heat - The appliance should be placed away from heat sources such as radiators or
electric/gas fires and direct sunlight from windows.
When not in use - The power cord of the appliance should be unplugged from the Power
outlet when left unused for a long period of time.
Power Sources - The appliance should only be connected to a mains power supply as
specified in the operating instructions or as marked on the appliance.
Ventilation - The ventilation holes in the rear casing prevent overheating. Do not block or
cover these holes, especially with cloth or paper.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
DO NOT REMOVE COVER, NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE ENGINEER. DISCONNECT FROM
MAINS SUPPLY WHEN NOT IN USE FOR LONG PERIODS.
POWER SOURCES
AC 110-240 Volts 50Hz or DC 12 Volts Only
WARNING
Never connect the AC power cord to any other voltages other than the one specified.
Use the attached power cord only.
NOTE:
Disconnect from the housing outlet when not in use for a long time.
SAFETY INSTRUCTIONS
FEATURES
AC/DC Power Operation
On Screen Programming
Daily 4 event Programmable ON/OFF Timer
Auto Tuning for Channel Presetting
110 Preset Channel
Sleep Timer (Up to 120 minutes)
Child Lock (Hotel Lock)
Automatic Power Shut Off
24:00 Clock Timer
2 Speaker
AUDIO/VIDEO IN & OUT Jack
5 Language on Screen Menu
Picture Adjustment
CATV Capability
NTSC 3.58/4.43 - PLAYBACK ON PAL 60Hz
PREPARATIONS
LOCATION OF CONTROLS............................................................................................ 2
REMOTE CONTROL ....................................................................................................... 3
ANTENNA CONNECTIONS ............................................................................................ 5
POWER SOURCES......................................................................................................... 5
SETTING LANGUAGE..................................................................................................... 6
PRESETTING THE CHANNELS ..................................................................................... 7
OPERATIONS
TV OPERATIONS.......................................................................................................... 11
SETTING THE CLOCK.................................................................................................. 12
SETTING THE ON/OFF TIMER..................................................................................... 13
CONVENIENT FUNCTIONS.......................................................................................... 15
PICTURE CONTROL..................................................................................................... 17
CHILD LOCK (HOTEL LOCK) ....................................................................................... 19
AV JACK CONNECTIONS............................................................................................. 21
TO WATCH NTSC VIDEO LASER DISC, DVD AND RECORDED VIDEO TAPE ........ 23
RECEPTION OF INTERFERENCE ............................................................................... 24
OTHERS
TROUBLESHOOTING GUIDE....................................................................................... 25
SPECIFICATIONS 1
CONTENTS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
234
5678
9
+
–
POWER QUICK
VIEW
0
CH CALL
AV
MUTE
MENU SET ENTER
NORMAL
VOL
CH
SLEEP
SKIP
COLOR
SYSTEM
TUNING
1
BATTERY INSTALLATION
Use two "UM-4" size batteries.
If the polarities, + and –, are wrongly
aligned. If the batteries are weak.
If there is an obstacle between the TV
and the remote control handset.
NOTE:
Your TV will not work in the following cases. Check them carefully.
4
Slide the cover in the
direction of the arrow
and remove.
Load the two batteries
as shown below. Replace the cover.
REMOTE CONTROL (Continued)
If direct sunlight or other strong light is
shining on the remote control sensor.
Connectthecablefromtheoutdoororindoorantennatotheantennajackontherearpanelas
shown below. For all antenna circuit problems, please consult your local dealer.
ANTENNA CONNECTIONS
5
OUT
VIDEO
IN
AUDIO
DC (- - - -) 12V
B)
A)
C)
A twin-lead telescopic antenna is
supplied with the unit. Insert the
antenna post into the mounting hole
on the back cabinet until it locks into
place. Insert the antenna adaptor
(supplied) to the antenna jack. Adjust
the length and angle of both antenna
rods to receive the best possible
picture.
EXTERNAL ANTENNA
The antenna connection is equivalent
to DIN 45 325 for a combined UHF/
VHF antenna with 75 ohm coaxial
cable.
CATV cable
To receive special channels connect
the CATV cable to the antenna jack.
A)
B)
C)
POWER SOURCES
OUT
VIDEO AUDIO DC (- - - -) 12V
IN
Cigarette
Lighter Socket
Rear ofTV
DC Input Jack
TO USE AC POWER SOURCE
Use the AC line cord provided for operation on AC. Insert the AC cord
plug into a AC outlet.
NOTE:
1. NEVER CONNECT THE AC POWER CORD TO ANYTHING
OTHER THAN THE SPECIFIED VOLTAGE. USE THE
ATTACHED POWER CORD ONLY.
2. IF YOU EXPERIENCE A STATIC DISCHARGE WHEN TOUCHING
THE UNIT, AND THE UNIT FAILS TO FUNCTION, SIMPLY
UNPLUG THE AC POWER CORD FROM THE AC OUTLET, AND
PLUG IT IN AGAIN. THE UNIT SHOULD RETURN TO NORMAL
OPERATION.
NOTE:
•Use the supplied car cord only and
do not use it with a DC 24V type
battery such as bus or truck.
•Use the TV while the car engine is
on.
TO USE DC POWER
By using the DC car cord supplied with the TV, you can operate this TV from a cigarette lighter
socket in any vehicle that utilizes a negative grounding system.
The fused 12V DC car cord has been designed to power the unit from the external DC power (12
volt negative ground) through the DC input jack.
Connect the smaller plug on the end of the cord to the DC input jack on the rear of the TV, then
insert the other end of the car cord into the cigarette lighter socket of your car.
SETTING LANGUAGE
This TV has 5 different languages for MENU set up which can be selected through ON
Screen Display: English, German, French, Italian or Spanish.
3
1
MENU
4Press the MENU button to return to
the normal TV screen.
To select the desired language,
English (ENGLISH), Spanish
(ESPANOL), French (FRANCAIS),
German (DEUTSCH) or Italian
(ITALIANO), press the SET UP or
DOWN button.
Then press the ENTER button.
CH TUNING
ON/OFF TIMER SET
CLOCK SET
PICTURE
LANGUAGE
PRESS:+/-/ENTER/MENU
PRESETTING THE CHANNELS
- Automatic tuning All stations will be preset in sequence available in your area.
- Manual tuning You activate the auto search function until your preferred station is tuned in.
Then you memorize this station into the chosen channel memory. For each
station you repeat the same procedure.
7
After connecting, preset the desired channel (up to 110 channels) in the following procedure.
There are two types of station presettings you may choose from:
AUTOMATIC TUNING
2
1Press the SET UP or DOWN button
to select the AUTO mode, then
press the ENTER button.
Press the MENU button. Press SET
UP or DOWN button to select the CH
TUNING mode, then press the ENTER
button.
MANUAL
AUTO
CH ALLOCATION
PRESS:+/-/ENTER/MENU
CH TUNING
CH TUNING
ON/OFF TIMER SET
CLOCK SET
LANGUAGE
PRESS:+/-/ENTER/MENU
CH TUNING
ON/OFF TIMER SET
CLOCK SET
PICTURE
LANGUAGE
PRESS:+/-/ENTER/MENU
SET ENTER
SET ENTER
MENU
4Press the MENU button twice. The
TV will return to normal TV screen.
3
All available channels in your area are
automatically scanned and stored in
the memory of the TV.
When the TV find the broadcasting
channel, mark disappears.
After scanning, the previous step 2 screen
appears.
MENU
CH position
searching
direction
Tuning segment bar
NOTE: If you want to skip the channel, refer to page 16.
When the unit is in the AV mode, you can't preset the channels.
•
•
PAL CH 10
1
MENU
SET ENTER
SET ENTER
Press the SET UP or DOWN button
to select the MANUAL mode, then
press the ENTER button.
SET ENTER
3Press the SET UP or DOWN button until the picture appears on screen. Then
press the ENTER button. If this is not your desired channel, press the SET UP or
DOWN button until your desired channel appears.
PRESETTING THE CHANNELS
2
Press the MENU button.
Press the SET UP or DOWN button to
select the CH TUNING mode, then
press the ENTER button.
(Continued)
CH TUNING
ON/OFF TIMER SET
CLOCK SET
PICTURE
LANGUAGE
PRESS:+/-/ENTER/MENU
MANUAL
AUTO
CH ALLOCATION
PRESS:+/-/ENTER/MENU
CH TUNING
8
NOTE: Ifthe color ofthe pictureis poor,pressthe COLOR SYSTEM button.
MANUAL TUNING
- How to tune a station to channel 10 position.
PAL CH 1
NOTE: Ifyou need to makethepicture clearer,
pressfine TUNING Upor Downbutton.
Tabla de contenidos
Otros manuales de TELEVISOR de Orion
Orion
Orion LED 3241 Manual de usuario
Orion
Orion MD17 Manual de usuario
Orion
Orion 14ARX Manual de usuario
Orion
Orion TV32LB2000(H) Manual de usuario
Orion
Orion LCD PIF26-D Manual de usuario
Orion
Orion TV37RN10D Manual de usuario
Orion
Orion LCD2028D Manual de usuario
Orion
Orion Color CRT TV Manual de usuario
Orion
Orion TV1329 Manual de usuario
Orion
Orion TV20RN10D Manual de usuario
Manuales populares de TELEVISOR de otras marcas
Philips
Philips Colour Television Manual de usuario
Toshiba
Toshiba 27A10 Manual de usuario
Philips
Philips 42PF9630A/37 Manual de usuario
Hitachi
Hitachi 32FX48B Manual de usuario
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario
Changhong Electric
Changhong Electric uhd55b6000is Manual de usuario
