Original BTC Primo Table Manual de usuario

Primo Table & Floor

Instruction Manual

US-FF463N / US-FT311

Live

KEY

Neutral

Earth

L =

N =

*Mains

Supply

Fitting

*After 2004, wiring installation colours changed:

LIVE Brown replaces Red

EARTH Green/Yellow sleeving

NEUTRAL Blue replaces Black

BROWN

GRN/YEL

BLUE

BROWN

GRN/YEL

BLUE

MADE INBRITAIN

Live

KEY

Neutral

Earth

L =

N =

*Mains

Supply

Fitting

*After 2004, wiring installation colours changed:

LIVE Brown replaces Red

EARTH Green/Yellow sleeving

NEUTRAL Blue replaces Black

BROWN

GRN/YEL

BLUE

BROWN

GRN/YEL

BLUE

MADE INBRITAIN

Primo Floor Light

US-FF463N

Primo Table Light

US-FT311

Safety Instructions

These instructions are provided for your safety in order to prevent the risk of Fire, Electric

shock or Injury. Please retain for future reference. When fitting is in operation, some parts

will become hot; take care when using/handling.

- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to

overtighten lamp.

- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.

- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old

lamps carefully.

- Never leave a fitting without a lamp in position.

- Keep light fitting away from combustible materials such as soft furnishings.

- Ensure children do not play with the light fitting.

- Ensure the light is positioned on a solid, level and non-slip surface and make sure the

position of the cable does not pose a trip hazard.

- If the electrical flex or electrical components become damaged at any point, the fitting

must be unplugged from the power supply immediately and not operated until the

damaged parts are fixed/replaced.

- For use in a dry, indoor environment only. Ensure the fitting does not come into contact

with any liquids.

Cleaning and Maintenance

Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or

abrasives. Glass can be cleaned using a soft damp cloth with a mild detergent or suitable

glass cleaner if necessary. Switch off power to the fitting before cleaning. Spare parts are

available for this product, please see contact details on the reverse.

MADE IN BRITAIN

ORIGINALBTC.COM

+44 (0)1993 882 251

UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND

Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and

contemporary homes.

All products are hand-assembled in Oxford from high quality components, produced in the UK.

v1.2-05.19

LAMP GUIDANCE

TYPE* WATTAGE**

BASE SHAPE

ENG WARNING – RISK OF FIRE AND ELECTRIC SHOCK.

SUITABLE FOR DRY LOCATIONS ONLY

FR ATTENTION – RISQUE D’INCENDIE, RISQUE DE CHOC.

POUR EMPLACEMENTS SECS SEULEMENT

*After 2004, wiring installation colours changed:

LIVE Brown replaces Red

EARTH Green/Yellow sleeving

NEUTRAL Blue replaces Black

120V ac 60Hz IP20

Primo Table & Floor

MADE INBRITAIN

E26 A BALL

LAMP GUIDANCE

TYPE* WATTAGE**

BASE SHAPE

INCANDESCENT

CFL

ECO-HALOGEN

LED

40W MAX

11W

n/a

* Warm white (2700k) low energy lamps recommended.

** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.

US-FF463N Primo Floor Light US-FT311 Primo Table Light

Contents

Assembling Base

Adjusting Shade

- With one hand supporting the shade, gently loosen the

clamp handle (2). One quarter-turn, in an anti-clockwise

direction should be sufficient.

- The shade can then be moved into desired position,

ensuring the clamp remains attached to the stem, but

without applying excessive force to the washers on the

inside of the clamp. Ensure the shade is still supported

whilst adjusting position.

- Secure in place by gently tightening clamp handle,

taking care NOT to overtighten, as this can damage

the clamp.

- Do not adjust the position of the shade without

loosening the clamp first, as this will damage the

washers.

A Shade/Stem/Cable Assembly

B Base*

*This will be detached from stem in floor version

A Stem

B Thread

C Coupler

D Base

Place base on a level floor (non-slip surfaces work best during assembly).

STEP 1

Support the stem and shade with both hands, then insert the thread into the coupler on the base. Screw the stem into

the coupler until a tight, firm fit is achieved (the thread should no longer be visible).

STEP 2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Original BTC

Original BTC

Original BTC Alma US-FW703 Manual de usuario

Original BTC

Original BTC Doma FT411 Manual de usuario

Original BTC

Original BTC Davey Lighting US-DP7684 Manual de usuario

Original BTC

Original BTC Ginger FT082 Manual de usuario

Original BTC

Original BTC DAVEY LIGHTING 7202 Manual de usuario

Original BTC

Original BTC Davey Lighting DP7238 Manual de usuario

Original BTC

Original BTC Pillar 7214 Manual de usuario

Original BTC

Original BTC 7600 Manual de usuario

Original BTC

Original BTC Hugo FT417 Manual de usuario

Original BTC

Original BTC Hector Manual de usuario

Original BTC

Original BTC Alma US-FF701N Manual de usuario

Original BTC

Original BTC Stirrup US-FF523 Manual de usuario

Original BTC

Original BTC Chester FT580 Manual de usuario

Original BTC

Original BTC Stirrup FF523 Manual de usuario

Original BTC

Original BTC Hatton 3 Manual de usuario

Original BTC

Original BTC US-FP297 Manual de usuario

Original BTC

Original BTC Cecil FT554 Manual de usuario

Original BTC

Original BTC FW363 Manual de usuario

Original BTC

Original BTC Fin FT572 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario