Optiview H.264 Manual de usuario

Optiview

Optiview H.264 DVR

Setup Guide

Package Content

Inspect the packaging carton. Make sure the Optiview H.264 DVR is properly delivered. Remove

all items from the box and make sure the box contains the following items.

Optiview H.264 DVR

Power

Adapter

Power

Cord

Software

CD-CMS

User’s

Manual

Function Keys on the Front Panel

Channels (4 / 8 / 16)

COPY

MODE

ENTER

DOME

ESC

SEQ (Sequence)

Direction Keys

FREEZE

CALL

PLAY/STOP

Rear Panel Connectors

USB Connectors

Call Monitor

Main Monitor - BNC

LAN 10/100M (RJ-45)

Video Input (BNC)

Power Jack

Main Monitor –VGA

(Optional)

Alarm In, RS-485, &

Audio In

UTP Input

(Optional)

Call Monitor Audio Out

Main Monitor Audio Out

Description of Connectors

USB Connector

There are three USB 2.0 ports (2 at rear + 1 at front) to allow users to

connect external USB devices to the unit, such as a USB

ThumbDrive®or a USB mouse.

LAN 10/100M

(RJ-45)

The DVR is capable of networking. Once the unit is connected to the

LAN network, users can remotely access the unit through the remote

software on a PC.

Main Monitor-

VGA(optional)

The DVR can connect to a monitor via an optional VGA connector.

Call Monitor

Audio Out

Call Monitor Audio Out RCA connectors are provided for the DVR to

connect audio output devices (e.g. amplified speakers).

Call Monitor

(BNC)

The call monitor is used to display full screen video of all installed

cameras in sequence. The BNC Call Monitor connector allows users

to connect the DVR to a call monitor. To access call monitor control,

please use the IR remote controller.

Video Input BNC

A group of BNC connectors is provided for video input streams from

installed cameras. The number of connectors is equal to the number of

channels.

Alarm I/O, RS-485,

& Audio In

Terminal block connectors are provided to offer users the flexibility to

connect the DVR to Alarm I/O, RS-485, and Audio In devices. Refer to

the next page for pin definition of each model.

Main Monitor

Audio Out

Main Monitor Audio Out RCA connectors are provided for the DVR to

connect audio output devices (e.g. amplified speakers).

Main Monitor-

BNC

The DVR can connect to a monitor via a BNC connector.

Power Jack

The DVR has a free voltage DC power connection jack. Please

connect the power supply adapter shipped with the unit.

UTP Input

(Optional)

The UTP Input offers additional connectivity using the Unshielded

Twisted Pair wiring. UTP cable is one of the most common medium in

telecommunication industry.

Pin Definition of Alarm I/O, RS-485, & Audio In

4ch-Model:

Definition

Alarm In 1

Ground

Alarm In 2

Audio In 4

Ground

Alarm In 3

Audio In 3

Ground

Alarm In 4

RS485 D+

Alarm Out COM

RS485 D-

Audio In 2

Alarm Out C

Ground

Audio In 1

Alarm Out O

Ground

8ch-Model:

Definition

Audio In 8

Alarm Out COM

Alarm In 4

Audio In 7

Alarm Out C

Alarm In 3

Audio In 6

Alarm Out O

Alarm In 2

Audio In 5

RS485 D+

Alarm In 1

Audio In 4

Alarm In 8

Ground

Audio In 3

Alarm In 7

Ground

Audio In 2

Alarm In 6

Ground

Audio In 1

Alarm In 5

RS485 D-

16ch-Model:

Definition

Audio In 16

Audio In 6

Alarm In 16

Alarm In 6

Audio In 15

Audio In 5

Alarm In 15

Alarm In 5

Audio In 14

Audio In 4

Alarm In 14

Alarm In 4

Audio In 13

Audio In 3

Alarm In 13

Alarm In 3

Audio In 12

Audio In 2

Alarm In 12

Alarm In 2

Audio In 11

Audio In 1

Alarm In 11

Alarm In 1

Audio In 10

Alarm Out COM

Alarm In 10

Ground

Audio In 9

Alarm Out C

Alarm In 9

Ground

Audio In 8

Alarm Out O

Alarm In 8

Ground

Audio In 7

RS485 D+

Alarm In 7

RS485 D-

Basic Setup

Follow the description to set up the configuration of date/time, recording, and viewing mode of the

DVR. All configurations can be set via either the DVR or DVRRemote, the remote software.

Enter OSD Setup menu:

Press MENU to enter the OSD main menu.

Enter password using Channel keys. The default passwords are as below.

Administrator Password

User Password

1 2 3 4

4 3 2 1

It is strongly suggested to change the passwords to prevent unauthorized access.

Date / Time Setting:

Follow the steps below to enter the Date/Time.

Select <Date/Time> in System Setup menu to enter the Date/Time menu.

Select the date and time using LEFT/RIGHT keys; then adjust the value using UP/DOWN keys.

The new date and time settings take effect after the changes are confirmed.

To Define Recording Settings:

Select <Record Setup> from the OSD main menu.

Select <ezRecord> as Preset Configuration option, and select wanted number of recording

day in ezRecord Setup; other setting will be automatic arranged by the unit.

Consider application needs and select a Preset Configuration setting from <Best Quality>,

<Standard>, and <Extended Record>. Detailed information refers to Optiview H.264 DVR

User’s Manual, Preset Record Configuration.

Adjust the Recording schedule, Pre-alarm, Circular and Audio parameters.

When the settings are complete, press ENTER to confirm and save the settings; or ESCto

abort.

To Select Viewing Mode:

Press MODE button repeatedly to select the desired display mode. The available viewing

modes are full-screen, 2×2, 3x3, and 4×4 split-window.

Network Setup

Configure the LAN setup for the DVR to properly function with Ethernet connection.

From OSD main menu, select <System Setup> <Network Setup> <LAN Setup>.

For DHCP user, set the DHCP to <ON>. The IP address, Netmask, Gateway and DNS settings

are retrieved from network servers. DHCP is dynamic that the settings change from time to time.

For Non-DHCP user, set the DHCP to <OFF>. Enter an IP address, Netmask, Gateway, and

DNS settings. Please obtain the information from the network service provider.

To change the IP address, Netmask, Gateway and DNS value, press UP/DOWN keys to move

the cursor to the item. Use LEFT/RIGHT keys to access each section of the value and press

ENTER, then change the value using UP/DOWN keys.

When the settings are complete, press ENTER to confirm and save the settings; or ESC to

abort.

Dome Camera Connection

Dome Camera Connection & Settings:

See section Pin Definition of Alarm I/O, RS-485, & Audio In for RS-485 port pin definition.

Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D-

terminals on the RS-485 port by RS-485 cable respectively.

To set up dome camera’s protocol and ID, press MENU to access the OSD main menu, and

select <Camera Setup>. The available protocol options include <Pelco D>, <Pelco P>,

<AD422>, <Fastrax 2>, <JVC>, <Panasonic_C>, <Panasonic_N> and <None> (default).

Note that ID number must match the ID address defined by the dome camera.

To configure the RS-485 parameters, select <System Setup> from OSD main menu, and then

select <RS485 Setup>. The default Optiview H.264 DVR RS-485 settings are 9600 Baud, 8

Data Bits, 1 Stop Bit and No Parity.

Dome Camera Control Keys:

Set / Go Preset

Pan / Tilt

Iris Close

Toggle Hint Screen

Enter Dome Camera

Control Mode

Iris Open

Enter / Auto

Focus Near

Zoom Out

ESC

Focus Far

Zoom In

Basic Playback Operation

Searching Recorded Video by Time:

Press SEARCH button to enter the Search menu.

Move the cursor to “From Time” and press ENTER will start playing recorded video from the

specified “From Time”.

Move the cursor to “End Time” and press ENTER will start playing recorded video from the

specified “End Time”.

Use Direction keys to move the cursor for setting the Start Time; adjusting the date and time

values by UP/DOWN keys. Press ENTER to confirm or ESC to abort.

Move the cursor to <Begin Playback> and press ENTER to start playing back the selected

video. Either press PLAY/STOP again or ESC to return to live video.

NOTE: If there is no available recorded video that matches the specified time and date, the

unit starts to playback from the next available video.

Searching Recorded Video by Event:

Press SEARCH button to enter the Search menu.

To search event video that was recorded on a specific camera, use LEFT/RIGHT keys to move

the cursor and press ENTER to select or de-select a channel.

Move the cursor to <Event List> and press ENTER to list the event video of the selected

channels.

The list displays each event by date, time, triggered camera and alarm type. The latest recorded

event video will be listed on the top. To exit the event list, press ESC.

Use UP/DOWN keys to scroll through the Event List. Press ENTER to play back the selected

event record.

NOTE: The event list displays only the first 1024 events; as some events are deleted, others

are displayed.

Playback Controls:

Button

Description

LEFT

The button is for rewinding the recorded video while playing back. Press the button

repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×.

RIGHT

The button is used to play the recorded video fast forward. Press the button

repeatedly to increase the speed of forward playback by 1×, 2×, 4×, 8×, 16×, or 32×.

FREEZE

Press FREEZE to pause the playback video. When the recorded video is paused,

press LEFT / RIGHT to resume playback video single step reverse / forward

respectively. Press FREEZE again to continue playing back video.

Play/Stop

Press to start the playback or to stop playing back video and return to live mode.

Using Remote Software

Setup Requirements:

Make sure the PC is connected to the Internet.

Obtain IP address of the Optiview H.264 DVR. To check the DVR’s IP address, press MENU

key on the unit and select <System Setup> <Network Setup> <LAN Setup> <IP> to

check the IP.

Changing Internet Setting:

Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

Select <Trusted sites> and click <Sites> to specify its security setting.

Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the

unit in field and click <Add> to add this website to the zone.

In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>,

set all items to <Enable> or <Prompt>.

Click <OK> to accept the settings and close the <Security Settings> screen.

Using the Remote Software:

Start the IE and enter the IP address of the Optiview H.264 DVR in the address bar.

The ActiveX controls and plug-ins dialog will show twice for confirmation; click <YES> to accept

ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC

automatically when the connection is successfully made.

NOTE: Do not enter any leading “0”characters in the address, for example,

“192.068.080.006”should be entered “192.68.80.6”.

NOTE: If the default trigger port 80 is changed into another one, port 81 for example,

then the IP address should be entered as “192.68.80.6:81”.

Version verification starts automatically to verify whether DVRRemote was installed. This

process may take up to 30 seconds.

When the software is completely downloaded and installed, the Login Screen is displayed.

Enter the username and password. The default usernames and passwords are admin: 1234,

user: 4321.

The following picture shows the display window of the DVRRemote:

Refer to the table below for brief description of functional items:

Item

Description

Item

Description

Select Picture Size

HDD Status

Download DVRPlayer

Playback Control

View Live Camera

Instant Recording

Playback Video

Audio On/Off

Setup Menu

Select Camera

Search Event List

Select Bandwidth Speed

Capture Snapshot

Display Mode

4:3 Viewing Aspect

Dome Camera Control Panel

For more information on DVRRemote, see User’s Manual.

DVRRemote Playback

To Playback Remote Video:

Click <Play> on the main window toolbar, and then <Remote Playback> tab.

The <From> and <To> on top of the screen display the date and time from which recorded

video is available for playback.

Choose <Playback> in <Select> field for playback recorded video.

Select the date and time of the segment to play back from the <Start> field. The date and time

can be changed either by typing desired numbers directly or using the arrow buttons.

Click <OK> to start the playback, or click <Close> to abort.

To Playback Local *.drv File:

Click <Play> on the main window toolbar, and then <Local Playback> tab.

Click <Open> and the file selection screen is displayed. Select the *.drv video file to playback

and click <OK>.

Click <OK> to start the playback, or click <Cancel> to abort.

View the video playback using the Playback controls.

To end the playback, click <Live> to return to live video.

To Playback Local *.avi Files:

Start the windows media player or other media player from <Start> menu (or any other possible

access).

Select <File> and then <Open>.

Select the wanted *.avi file, and click <Open>.

NOTE: The *.avi files for each channel are stored separately. Therefore the video can be

played back in single channel, full screen mode only.

To Playback Event Video

Click SEARCH on the main window toolbar. The Event List appears.

Scroll through the Event List and highlight the interested events.

Double-click on the desired event to view the event video.

Playback Controls:

Tabla de contenidos

Otros manuales de DVR de Optiview

Optiview

Optiview H.264 DVR System Manual de usuario

Optiview

Optiview DVRJ4 Manual de usuario

Optiview

Optiview 2.28.06/4.37 Manual de usuario

Optiview

Optiview DVR Manual de usuario

Optiview

Optiview 4CH Manual de usuario

Optiview

Optiview MPEG-4 Manual de usuario

Optiview

Optiview DVR4Lite Manual de usuario

Optiview

Optiview DVRJ4A Manual de usuario

Optiview

Optiview General 720P 1U Series Manual de usuario

Optiview

Optiview HDVR4/8/16-Q2 Manual de usuario

Optiview

Optiview VR LT Guía de solución de problemas

Optiview

Optiview 4M Series Manual de usuario

Optiview

Optiview CVI Manual de usuario

Optiview

Optiview C Series Instrucciones de funcionamiento

Optiview

Optiview VRHT Guía de solución de problemas

Optiview

Optiview 4 Camera M-JPEG 120fps Triplex Embedded DVR... Manual de usuario

Optiview

Optiview VR4HT Manual de usuario

Optiview

Optiview DVRTT PRO Series Manual de usuario

Optiview

Optiview General 4-HDD 720P 1.5U Series Manual de usuario

Optiview

Optiview VR series Manual de usuario

Optiview

Optiview DVR4Lite Manual de usuario

Optiview

Optiview 4CHs Manual de usuario

Optiview

Optiview VR Enterprise Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario