Optiled CabLED C8K-60-WW Manual de usuario
8000 Series User Manual
Flexible Linear Lighting System
The versatile indoor and outdoor water resistant lighting solution.
IMPORTANT SAFETY INSTRUCTIONS
2
cabled.optiled.com
ELECTRICAL RATING
To avoid any malfunctions of the system, and to protect against electrical shock, re or physical
injury, please observe the following:
This system has been designed to work with 100-240 volt AC current. Connection to a line
•
voltage other than that may create a safety and re hazard and may damage the system. If you
are unsure of the type of power supply to your home, consult your local power company or a
qualied service technician.
When using electrical products, basic precautions should always be followed including the
following electrical ratings for models listed below:
C8K-18-CW / C8K-18-WW : 120 V, 0.5 A ; Output : 24V, 0.75A
C8K-30-CW / C8K-30-WW : 120 V, 0.5 A ; Output : 24V, 1.25A
C8K-60-CW / C8K-60-WW : 120V, 1.0 A ; Output : 24V, 2.5A
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a
•
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment-grounding conductor is able to result in a
•
risk of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product
- If it will not t the outlet, have a proper outlet installed by a qualied electrician.
Read all instructions.
Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet
•
to be used for the outdoor use exible lighting product. Receptacles are available with built-
in GFCI protection for this measure of safety. If you are unsure of the type of outlet, consult a
qualied service technician to install a GFCI receptacle.
Use only outdoor extension cords, such as types SW, SOW, STW, STOW, SJW, SJOW, SJTW,
•
or SJTOW.
Model Numbers:
C8K-18-CW
,
C8K-30-CW
,
C8K-60-CW
,
C8K-18-WW
,
C8K-30-WW
,
C8K-60-WW.
WARNING:
A WARNING alerts you to the possibility of serious injury
or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of damage to or destruction
of the equipment if you do not follow the instructions.
IMPORTANT:
An IMPORTANT alerts you to follow the instructions listed to
avoid the possibility of installation error or possible damage to or destruction of the
product.
!
!
!
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING –
When using outdoor use portable lighting products, basic safety precautions should
always be followed to reduce the risk of re, electric shock, and personal injury, including the following:
IMPORTANT SAFETY INSTRUCTIONS
cabled.optiled.com
3
POWER SOURCE
Do not modify the plug provided with the product – If it will not t the outlet, have a proper
•
outlet installed by a qualied electrician.
Damaged or deformed power cords are hazardous and should be replaced immediately by a
qualied service technician.
OPERATION
Do not operate with the exible light tightly coiled.
•
Do not puncture, cut, shorten, or splice the exible lighting.
•
Unplug the unit and the AC power adapter from the electrical outlet during electrical storms
•
or when unused for long periods of time to prevent damage.
For outdoor use units, make sure that all connections and the end cap in the last segment are
•
tightly secured to preclude the entry of water.
Do not exceed the recommended length of CabLED strip listed for each power supply.
•
Do not look directly into the LED lights when lit. They are powerful and could damage your
•
vision.
LOCATION
Place power supply well above the ground or in an area they will NOT be submerged in water
•
or other liquids.
The CabLED strip and components are rated IP65, weather proof only. Do not submerge the
•
exible lighting in liquids, or use the product in the vicinity of standing water or other liquids.
Keep all components away from extreme heat sources such as heating vents, radiators, electric
•
heaters and re pits.
Do not cover this product as the covering may cause the exible light to overheat and melt or
•
ignite.
Do not submerge the exible light in liquids, or use the product in the vicinity of standing
•
water or other liquids.
Do not route the cord or exible lighting through walls, doors, windows or any like part of the
•
building structure.
Place CabLED strip so it will not shine directly into people's eyes.
•
INSTALLATION
Safety measures must be observed at all times during the installation of this product. Use proper
safety gear and tools during the installation process to prevent physical injury.
Products should be installed in accordance with the user manual, current electrical codes and/
•
or the current National Electric Code (NEC). Improper installation may cause a possible shock
or re hazard.
To avoid electrical shock and/or damage to the system, do not handle the components with wet
•
hands.
Always make sure the CabLED strip is disconnected from the power source before cutting,
•
connecting, mounting or modifying in any way. Do NOT dismantle the CabLED strip itself.
Do not coil the strip into a tight circle with a diameter less than 8 inches (20cm) or bend it in
•
half as it may damage the LEDs embedded in the strip.
Do not subject the exible CabLED strip to continuous exing.
•
WARNING:
Risk of re and electric shock. Uncoil exible CabLED light
strip prior to plugging into receptacle.
!
IMPORTANT SAFETY INSTRUCTIONS
4
cabled.optiled.com
INSTALLATION (CONTINuEd)
Do not use if there is any damage to the light or cord insulation. Inspect periodically.
•
CabLED strip can only be cut at every 7.09 inches (18cm) and must be cut exactly on the
•
indicated mark.
Do not puncture, shorten, or splice the exible lighting. Only cut the CabLED strip where
•
indicated.
Create a layout plan before installation. Follow steps to locate power supply and determine
•
suitable mounting methods and required connectors and accessories. Measure and calculate
the required length of CabLED before beginning installation.
CabLED connectors have sharp pins inside. Follow instructions when handling.
•
Use only CabLED connectors, mountings and power supply. Carefully follow the instructions to
•
install and mount.
Secure this exible strip using only the hangers or clips provided. Do not secure this product
•
or its cord with staples, nails, or like means that may damage the insulation.
CLEANING
Clean only with a dry or slightly damp cloth. Do not use any
•
acid or alkaline liquids,
cleansing
agents or solvents. Unplug the system from the wall outlet before cleaning.
NON-uSE PERIOdS
When left unused for long periods of time, the system should be unplugged from the
AC outlet.
SERVICE
Always remove the AC power adapter from the electrical outlet before adjusting or inspecting
the system. Inspect your system periodically.
Do not open, dismantle or attempt to repair the CabLED strip or the bottom half of the
•
connectors. There are no user-serviceable parts.
Do not open the cabinets of accessories or power supply. There are no user-serviceable parts.
•
Opening the cabinets may present a shock hazard, and any modication to the product will
void your warranty.
Do not attempt to service the components yourself. If water or any metal objects such as
•
paper clips, wire or staples accidentally fall inside, then disconnect from the power source
immediately and consult an authorized service center.
SAVE THESE INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ
AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL.
!
CabLED is a registered trademark. All the information in this document is Copyrighted © 2011,
OPTILED Lighting International Limited, All rights reserved.
Table of Contents
cabled.optiled.com 5
Important Safety Information 2-4
Table of Contents ................................................................. 5
Introduction ..................................................................... 6
About This Manual ......................................................... 6
About CabLED™ 8000 Series .................................................. 6
Possible Applications ............................................................ 7-11
Kitchen Cabinets .......................................................... 7
Patios................................................................... 8
Indoor Staris.............................................................. 9
Outdoor Stairs ............................................................10
Walkways ................................................................11
Design Guidelines 12
CabLED™ Component Layout 13
CabLED™ Component Overview 14-18
CabLED™ Strip 14
Power Supplies 14
Connectors ........................................................... 15-16
Mounting Options .........................................................17
DIY Systems ..............................................................18
Accessories...............................................................18
Step 1: Plan Installation 19
Plan Your Project ..........................................................19
What is the Purpose of Your Project?............................................19
Warm White or Cool White? ..................................................19
Step 2: Prepare for Installation 19-21
2.1 Determine Components Needed 19
2.2 Measure and Mark the Area............................................... 20
2.3 Select Power Supply .................................................... 20
2.4 Mounting Options ......................................................21
Step 3: Begin Installation 22
3.1 Measure, Mark and Cut CabLED™........................................... 22
3.2 Mark CabLED™ ........................................................ 22
3.3 Cut CabLED™ ......................................................... 22
Step 4: Install Connectors 23-30
4.1 Install PS-Link Connector................................................. 23
4.2 Install End Cap ........................................................ 23
4.3 Install I-Connector ......................................................24
4.4 Install Jumper Cable .................................................... 25
4.5 Install L-Connector ..................................................... 26
4.6 Install T-Connector ......................................................27
4.7 Install U-Connector..................................................... 28
4.8 Install X-Connector ..................................................... 29
4.9 Install 4 Way Power Splitter ............................................... 30
Test ................................................................... 30
Step 5: Install Accessories 30
5.1 Install Inline Dimmer .....................................................31
Test ................................................................... 23
4.2 Mount Inline Dimmer ................................................... 23
Step 6: Mount CabLED™ 32-36
6.1 Mark Placement for Brackets ...............................................32
6.2 Use One of the Following Five Methods to Mount CabLED™ .................... 32-36
Step 7: Mount Power Supply 37
Step 8: Connect to Power 37
Troubleshooting 38
LED Strip
The exible CabLED strip uses CREE High Brightness LED lights. They are set every
inch and can be cut every 7.09 inches (18cm) up to lengths of 49.2 feet (15m). The
strips are available in Cool White (6500K), a bright, bluish white generally used for
task lighting and Warm White (3500K) a yellowish white more commonly used in
living spaces.
Connectors
A variety of easy-to-use connectors are designed for specic uses in dierent
installations. The connectors are used to attach sections of CabLED strip together
at virtually any angle to form endless congurations, as well as connect the strip to
the power supply.
Accessories
The Inline On/O Dimmer Switch is mounted with your system, adding dimmer
and power functions when connecting to an outlet not controlled by a light
switch. It oers full dimming range, fades the CabLED system on and o, and
retains last dimming level selected with a simple push of buttons.
Power
Every installation requires a CabLED power supply. There are twenty 24 volt
power supplies available for installations worldwide. The available power supplies
are separated by suitable plugs for each region. After identifying the correct
region, determine the length of CabLED strip needed to select the correct power
supply for each installation.
If you are unsure of the correct voltage, contact a
qualied electrician.
Mounting
A choice of ve mounting solutions are available.
Introduction
6
cabled.optiled.com
About CabLED™ 8000 Series
The CabLED 8000 Series consists of ve components, which may be combined to customize
each application. All components are rated IP65, suitable for indoor or outdoor installations.
IMPORTANT:
BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ
AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL.
!
The 8000 Series system includes an assortment of components to cover a variety of
indoor or outdoor applications. Our goal is to make this installation easy for you. Please
follow the instructions in the order presented in this manual and be sure to observe all
warnings and cautions.
About This Manual
Thank you for purchasing your CabLED 8000 system. This manual is divided into sections
designed to make every installation easy for you. We have provided several typical indoor and
outdoor applications with helpful tips to help you visualize your potential CabLED projects.
In addition to this manual, you will nd a Quick Start Guide for each component you have
purchased. Although these products are designed for easy operation, before you start we
suggest you review these manuals to fully understand and take advantage of all the features.
The 8000 Series oers great exibility, therefor it is very important to begin each installation
with a detailed plan. Go through the steps and options in this manual to determine the required
components for your needs. Please follow the instructions in the order presented in this manual
and be sure to observe all warnings and cautions.
Possible Applications
cabled.optiled.com 7
EEnd Cap
JJumper Cable (There are two lengths used here)
PPS-Link Connector
PS Power Supply
UU-Connector
PS
P
J
E
J
U
Components
In this scenario, the power supply is connected to an AC outlets connected to a light switch. We have used
two strips in work areas that require more light joined with a U-Connector at one end and a short Jumper
Cable on the other. A longer Jumper Cable is hidden in the cabinet above the stove. The following chart
lists the components used for this scenario.
Kitchen Cabinets
Possible Applications
8cabled.optiled.com
This scenario turns your patio into the perfect entertainment area. The power supply is mounted well
above the ground so it cannot be submerged in water. The following chart lists the components used for
this scenario.
Patios
EEnd Cap
LL-Connector
PPS-Link Connector
PS Power Supply
TT-Connector
XX-Connector
PS
P
L
T
L
L
E
XE
EE
Components
Possible Applications
The CabLED strips are mounted under the lip on each step, shining the light down on the step. Use the
Inline Dimmer to adjust the light level to keep your stairway softly lit. The Jumper Cables are hidden
behind the steps. The following chart lists the components used for this scenario.
Indoor Stairs
EEnd Cap
JJumper Cable
NInline Dimmer
PPS-Link Connector
PS Power Supply
N
PS
P
J
J
J
J
J
J
J
J
JJ
E
Components
cabled.optiled.com 9
Possible Applications
In this scenario, the power supply is mounted well above the ground so it cannot be submerged in water.
The following chart lists the components used for this scenario.
Outdoor Stairs
EEnd Cap
JJumper Cable
PPS-Link Connector
PS Power Supply
PS
P
J
E
Components
10 cabled.optiled.com
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
