Optiled CabLED C8K-18-CW Manual de usuario
C8K Series User Manual
Flexible Linear Lighting System
The versatile indoor and outdoor water resistant lighting solution.
2cabled.optiled.com
IMPORTANT SAFETY INSTRUCTIONS
ELECTRICAL RATING
To avoid any malfunctions of the system, and to protect against electrical shock, re or physical
injury, please observe the following:
• This system has been designed to work with 100-240 volt AC current. Connection to a line
voltage other than that may create a safety and re hazard and may damage the system. If you
are unsure of the type of power supply to your home, consult your local power company or a
qualied service technician.
When using electrical products, basic precautions should always be followed including the
following electrical ratings for models listed below:
C8K-18-CW / C8K-18-WW : 120 V, 0.5 A
C8K-30-CW / C8K-30-WW : 120 V, 0.5 A
C8K-60-CW / C8K-60-WW : 120V, 1.0 A
GROUNDING INSTRUCTIONS
• This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
• WARNING – Improper connection of the equipment-grounding conductor is able to result in a
risk of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded.
Read all instructions.
• Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet
to be used for the outdoor use exible lighting product. Receptacles are available with built-
in GFCI protection for this measure of safety. If you are unsure of the type of outlet, consult a
qualied service technician to install a GFCI receptacle.
• Use only outdoor extension cords, such as types SW, SOW, STW, STOW, SJW, SJOW, SJTW,
or SJTOW.
Model Numbers: C8K-18-CW, C8K-30-CW, C8K-60-CW, C8K-18-WW, C8K-30-WW, C8K-60-WW.
WARNING: A WARNING alerts you to the possibility of serious injury or death if
you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage to or destruction
of the equipment if you do not follow the instructions.
IMPORTANT: An IMPORTANT alerts you to follow the instructions listed to
avoid the possibility of installation error or possible damage to or destruction of the
product.
!
!
!
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING – When using outdoor use portable lighting products, basic safety precautions should
always be followed to reduce the risk of re, electric shock, and personal injury, including the following:
cabled.optiled.com 3
IMPORTANT SAFETY INSTRUCTIONS
POWER SOURCE
• Do not modify the plug provided with the product – If it will not t the outlet, have a proper
outlet installed by a qualied electrician.
Damaged or deformed power cords are hazardous and should be replaced immediately by a
qualied service technician.
OPERATION
• Do not operate with the exible light tightly coiled.
• Unplug the unit and the AC power adapter from the electrical outlet during electrical storms
or when unused for long periods of time to prevent damage.
• For outdoor use units, make sure that all connections and the end cap in the last segment are
tightly secured to preclude the entry of water.
• Do not exceed the recommended length of CabLED strip listed for each power supply.
• Do not look directly into the LED lights when lit. They are powerful and could damage your
vision.
LOCATION
• Place power supply well above the ground or in an area they will NOT be submerged in water
or other liquids.
• The CabLED strip and components are rated IP65, weather proof only. Do not submerge the
CabLED strip or components in liquids, or use the product in the vicinity of standing water or
other liquids.
• Keep all components away from extreme heat sources such as heating vents, radiators, electric
heaters and re pits.
• Do not cover this product as the covering may cause the strip to overheat and melt or ignite.
• Do not submerge the exible light in liquids, or use the product in the vicinity of standing
water or other liquids.
• Do not route the cord or exible lighting through walls, doors, windows or any like part of the
building structure.
• Place CabLED strip so it will not shine directly into people's eyes.
INSTALLATION
Safety measures must be observed at all times during the installation of this product. Use proper
safety gear and tools during the installation process to prevent physical injury.
• Products should be installed in accordance with the user manual, current electrical codes and/
or the current National Electric Code (NEC). Improper installation may cause a possible shock
or re hazard.
• To avoid electrical shock and/or damage to the system, do not handle the components with wet
hands.
• Always make sure the CabLED strip is disconnected from the power source before cutting,
connecting, mounting or modifying in any way. Do NOT dismantle the CabLED strip itself.
• Do not coil the strip into a tight circle with a diameter less than 8 inches (20cm) or bend it in
half as it may damage the LEDs embedded in the strip.
• Do not subject the exible CabLED strip to continuous exing.
WARNING: Risk of re and electric shock. Uncoil exible CabLED light
strip prior to plugging into receptacle.
!
4cabled.optiled.com
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION (CONTINUED)
• Do not use if there is any damage to the CabLED strip, power cord or any of the components.
Inspect periodically.
• CabLED strip can only be cut at every 7.09 inches (18cm) and must be cut exactly on the
indicated mark.
• Do not puncture, shorten, or splice the exible lighting. Only cut the CabLED strip where
indicated.
• Create a layout plan before installation. Follow steps to locate power supply and determine
suitable mounting methods and required connectors and accessories. Measure and calculate
the required length of CabLED before beginning installation.
• CabLED connectors have sharp pins inside. Follow instructions when handling.
• Use only CabLED connectors, mountings and power supply. Carefully follow the instructions to
install and mount.
• Secure this exible strip using only the CabLED connectors and mounting solutions provided.
Do not secure this product or its cord with staples, nails, or like means that may damage the
insulation.
CLEANING
• Clean only with a dry or slightly damp cloth. Do not use any acid or alkaline liquids, cleansing
agents or solvents. Unplug the system from the wall outlet before cleaning.
NON-USE PERIODS
When left unused for long periods of time, the system should be unplugged from the
AC outlet.
SERVICE
Always remove the AC power adapter from the electrical outlet before adjusting or inspecting
the system. Inspect your system periodically.
• Do not open, dismantle or attempt to repair the CabLED strip or the bottom half of the
connectors. There are no user-serviceable parts.
• Do not open the cabinets of accessories or power supply. There are no user-serviceable parts.
Opening the cabinets may present a shock hazard, and any modication to the product will
void your warranty.
• Do not attempt to service the components yourself. If water or any metal objects such as
paper clips, wire or staples accidentally fall inside, then disconnect from the power source
immediately and consult an authorized service center.
SAVE THESE INSTRUCTIONS
IMPORTANT: BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ
AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL.
!
CabLED is a registered trademark. All the information in this document is copyrighted © 2010,
OPTILED Lighting International Limited, All rights reserved.
Table of Contents
cabled.optiled.com 5
Important Safety Information 2-3
About This Manual ....................................................................................................................4
Table of Contents 5
About CabLED™ 8000 Series 6
Possible Applications 7-11
Kitchen Cabinets .......................................................................................................................7
Patios ........................................................................................................................................8
Indoor Stairs..............................................................................................................................9
Outdoor Stairs......................................................................................................................... 10
Walkways ................................................................................................................................ 11
Design Guidelines 12
CabLED™ Component Layout 13
CabLED™ Component Overview 14-20
CabLED™ Strip ....................................................................................................................... 14
Power Supplies ................................................................................................................... 14-16
Accessories ............................................................................................................................. 17
Mounting Options ................................................................................................................... 18
Connectors ........................................................................................................................ 19-20
Step 1: Plan Installation 21
Plan Your Project .....................................................................................................................21
What is the Purpose of Your Project?........................................................................................21
Warm White or Cool White?.....................................................................................................21
Which Accessories to Use?....................................................................................................... 21
Step 2: Prepare for Installation 22-23
2.1 Determine Components Needed........................................................................................22
2.2 Measure and Mark the Area................................................................................................22
2.3 Select Power Supply...........................................................................................................23
2.4 Mounting Options..............................................................................................................23
Step 3: Begin Installation 24
3.1 Measure, Mark and Cut CabLED™ ......................................................................................24
3.2 Mark CabLED™ ................................................................................................................. 24
3.3 Cut CabLED™....................................................................................................................24
Step 4: Install Connectors 25-31
4.1 Install PS-Link Connector ....................................................................................................25
4.2 Install End Cap...................................................................................................................25
4.3 Install I-Connector..............................................................................................................26
4.4 Install Jumper Cable...........................................................................................................27
4.5 Install L-Connector .............................................................................................................28
4.6 Install T-Connector.............................................................................................................29
4.7 Install U-Connector ............................................................................................................30
4.8 Install X-Connector.............................................................................................................31
4.9 Install 4 Way Power Splitter .................................................................................................32
Step 5: Test 32
Step 6: Install Optional Accessories 33-37
6.1 Install Inline On/Off Dimmer Switch ....................................................................................33
6.2 Install RF Light/Motion Sensor.......................................................................................33-35
6.3 Install RF Remote Dimmer ............................................................................................36-37
Step 7: Mount CabLED™ 38-41
7.1 Mark Placement for Brackets ...............................................................................................38
7.2 Use One of the Following Six Methods to Mount CabLED™ ...........................................38-41
Step 8: Mount Power Supply 42
Step 9: Mount Optional Accessories 42-44
9.1 Mount Inline Dimmer ..........................................................................................................42
9.2 Mount RF Receiver .............................................................................................................43
9.3 Mount RF Light/Motion Sensor ...........................................................................................43
9.4 Mount RF Remote Dimmer..................................................................................................44
Step 10: Connect to Power 44-45
10.1 Connect Without Accessories ...........................................................................................44
10.2 Connect With Optional Accessories..................................................................................45
Troubleshooting 46-47
LED Strip The exible CabLED strip uses CREE High Brightness LED lights. They are
set every inch and can be cut every 7.09 inches (18cm) up to lengths of 82
feet (25m). The strips are available in Cool White (6500K), a bright, bluish
white generally used for task lighting and Warm White (3500K) a yellowish
white more commonly used in living spaces.
Connectors A variety of easy-to-use connectors are designed for specic uses
in different installations. The connectors are used to attach sections
of CabLED strip together at virtually any angle to form endless
congurations, as well as connect the strip to the power supply.
Accessories • The Inline On/Off Dimmer Switch is mounted with your system,
adding dimmer and power functions when connecting to an outlet
not controlled by a light switch. It offers full dimming range, fades the
CabLED system on and off, and retains last dimming level selected with
a simple push of buttons.
• The RF Light/Motion Sensor has a fully weather-resistant case to
protect it from the elements. It automatically activates the CabLED
system when something moves within 50 feet (15m) of the sensor. It
is also equipped with a photocell that detects light and can be set to
turn the system on when it’s dark or only when it detects motion. The
system will automatically turn off when it no longer detects motion for
the length of time you specify, between 30 seconds and 30 minutes. It
comes with a receiver.
• The RF Remote Dimmer offers full dimming range, fades the CabLED
system on and off, and retains last dimming level selected with a simple
push of buttons on the remote unit. It comes with a receiver with a
range of 65 feet (20m).
Power Every installation requires a CabLED power supply. There are twenty 24
volt power supplies available for installations worldwide. The available
power supplies are separated by suitable plugs for each region. After
identifying the correct region, determine the length of CabLED strip
needed to select the correct power supply for each installation. If you
are unsure of the correct voltage, contact a qualied electrician.
Mounting A choice of six mounting solutions are available.
Introduction
6cabled.optiled.com
About CabLED™ 8000 Series
The CabLED 8000 Series consists of ve components, which may be combined to customize
each application. All components are rated IP65, suitable for indoor or outdoor installations.
IMPORTANT: BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ
AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL.
!
EEnd Cap
JJumper Cable (There are two lengths used here)
PPS-Link Connector
PS Power Supply
UU-Connector
PS
P
J
E
J
U
Possible Applications
cabled.optiled.com 7
Kitchen Cabinets
In this scenario, the power supply is connected to an AC outlets connected to a light switch. We
have used two strips in work areas that require more light joined with a U-Connector at one end
and a short Jumper Cable on the other. A longer Jumper Cable is hidden in the cabinet above
the stove. The following chart lists the components used for this scenario.
Components
DRemote Dimmer
EEnd Cap
LL-Connector
PPS-Link Connector
PS Power Supply
RReceiver
TT-Connector
XX-Connector
PS
R
P
L
T
L
L
E
XE
EE
D
Possible Applications
8cabled.optiled.com
Patios
This scenario turns your patio into the perfect entertainment area. Adjust the light using the
Remote Dimmer. The power supply is mounted well above the ground so it cannot be submerged
in water. The following chart lists the components used for this scenario.
Components
EEnd Cap
JJumper Cable
NInline Dimmer
PPS-Link Connector
PS Power Supply
N
PS
P
J
J
J
J
J
J
J
J
JJ
E
Possible Applications
cabled.optiled.com 9
Indoor Stairs
The CabLED strips are mounted under the lip on each step, shining the light down on the step.
Use the Inline Dimmer to adjust the light level to keep your stairway softly lit. The Jumper Cables
are hidden behind the steps. The following chart lists the components used for this scenario.
Components
EEnd Cap
JJumper Cable
PPS-Link Connector
PS Power Supply
RReceiver
SMotion Sensor
PS
RP
J
E
S
Possible Applications
10 cabled.optiled.com
Outdoor Stairs
In this scenario, we have mounted the Motion Sensor above the door so the stairs will be lit as
someone approaches them. The power supply is mounted well above the ground so it cannot be
submerged in water. The following chart lists the components used for this scenario.
Components
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Equipo de iluminación de Optiled
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
