Optika Italy C-B Series Manual de usuario

Model

C-B Series

C-B+ Series

C-P Series

C-P(Cooled) Series

C-D Series

C-E2 Series

Camera series C-B / C-B+ / C-P / C-D / C-E

INSTRUCTION MANUAL

Ver. 5.0 2019

Page 2

1. Warning 3

2. Symbols and conventions 3

3. Safety Information 3

4. Intended use 3

5. Overview 4

5.1 C-B Series 4

5.2 C-B+ / C-P Series 4

5.3 C-P (Cooled) / C-D Series 5

5.4 C-E Series 5

6. Unpacking 6

7. Assembling 6

7.1 C-B Series 6

7.2 C-B+ Series 6

7.3 C-P Series 7

7.4 C-P (Cooled) / C-D Series 7

7.5 C-E Series 8

7.6 Assembling on microscope 9

7.6.1 Connection to trinocular port using focusable “C” mount adapter 9

7.6.2 Connection to trinocular port using projection lens 10

7.6.3 Connection to binocular or monocular head 11

7.7 Connecting camera to PC 12

7.7.1 Only for cooled versions 12

7.8 Use of drainage tube (cooled versions) 12

7.9 Parfocality adjustment 13

7.9.1 Using a biological microscope 13

7.9.2 Using a stereomicroscope with “C” mount adapter 13

7.9.3 Using a stereomicroscope with projection lens 13

8. Use of camera 14

9. Micrometric Slide M-005 15

Equipment disposal 16

Contents

Page 3

1. Warning

This camera is a scientic precision instrument designed to last for many years with a minimum of maintenance.

It is built to high optical and mechanical standards and to withstand daily use. We remind you that this manual

contains important information on safety and maintenance, and that it must therefore be made accessible to the

instrument users. We decline any responsibility deriving from incorrect instrument use uses that does not comply

with this manual.

2. Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.

CAUTION

This symbol indicates a potential risk and alerts you to proceed with caution.

ELECTRICAL SHOCK

This symbol indicates a risk of electrical shock.

3. Safety Information

Avoiding Electrical Shock

Before plugging in the power supply, make sure that the supplying voltage of your region matches with the

operation voltage of the equipment and that the lamp switch is in o󰀨 position. Users should observe all safety

regulations of the region. The equipment has acquired the CE safety label. However, users have full responsibility

to use this equipment safely. Please follow the guidelines below, and read this manual in its entirety to ensure

safe operation of the unit.

4. Intended use

For research and teaching use only. Not intended for any animal or human therapeutic or diagnostic use.

Page 4

5. Overview

USB 2.0

CABLE SOCKET

“C” MOUNT

USB 3.0 CABLE SOCKET

(BACK OF THE CAMERA)

“C” MOUNT

5.1 C-B Series

5.2 C-B+ / C-P Series

Page 5

EXTERNAL POWER

SUPPLY SOCKET

USB2.0

CABLE SOCKET

5.3 C-P (Cooled) / C-D Series

USB3.0

CABLE SOCKET

OPERATION LED

USB2.0 CABLE SOCKET

MICROSCOPE

CONNECTION

5.4 C-E Series

Page 6

6. Unpacking

The device is housed in a moulded Styrofoam container. Remove the tape from the edge of the container and lift

the top half of the container. Take some care to avoid that the optical items fall out and get damaged.

Do not touch with bare hands optical surfaces such as lenses, lters or glasses. Traces of grease or

other residuals may deteriorate the nal image quality and corrode the optics surface in a short time.

7. Assembling

Once opened the box, the camera components are the following:

7.1 C-B Series

① Camera

② Projection lens

(C-B1 0.35x, all others C-B 0.5x)

③ Reduction ring 30.5 mm

④ Reduction ring 30 mm

⑤ Micrometric slide

⑥ USB2.0 cable

③ ④ ⑤

①

②

⑥

7.2 C-B+ Series

① Camera

② Projection lens

③ Reduction ring 30.5 mm

④ Reduction ring 30 mm

⑤ Micrometric slide

⑥ USB3.0 cable

③④

⑤

①

②

⑥

Page 7

7.3 C-P Series

① Camera

② USB3.0 cable

③ Micrometric slide

①

②③

7.4 C-P (Cooled) / C-D Series

① Camera

② USB3.0 cable

③ Draining tube

④ Micrometric slide

⑤ Power supply + cable

⑥ Transport box

① ②

③④

⑤

⑥

Page 8

① Camera

② USB2.0 cable

③ Reduction ring 30.5 mm

④ Reduction ring 30 mm

①

②③

④

7.5 C-E Series

Page 9

7.6 Assembling on microscope

7.6.1 Connection to trinocular port using focusable “C” mount adapter

1. Remove the dust cover from camera and from “C”

mount adapter.

2. Screw the “C” mount adapter to the camera’s

thread. (Fig. 1)

3. Loosen the clamping screw on the trinocular port

of the microscope, remove the dust cover and in-

stall the camera ”C” mount unit previously assem-

bled. (Fig. 2)

4. Tighten the clamping screw rmly. (Fig. 3)

Biological Stereomicroscopes

FFig. 1ig. 1

FFig. 2ig. 2

FFig. 3ig. 3

M-620 M-620.1 M-620.2 M-620.3 ST-090 ST-090.1 ST-090.2 M-620.3

Page 10

FFig. 4ig. 4

FFig. 5ig. 5

7.6.2 Connection to trinocular port using projection lens

FFig. 6ig. 6

1. Remove the dust cover from camera and from

projection lens.

2. Screw the projection lens to the camera’s thread.

(Fig. 4)

• Installing on biological microscopes

3. Insert the nal part of the projection lens into the

empty hole of the photo tube. (Fig. 5)

• Installing on stereomicroscopes

4. Insert the nal part of the projection lens into the

empty hole of the photo tube. (Fig. 6)

• Installing C-E2 camera

5. Insert the microscope connector in the empty

hole of the photo tube. (Fig. 7)

FFig. 7ig. 7

Otros manuales para C-B Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de laboratorio de Optika Italy

Optika Italy

Optika Italy Modular Series Manual de usuario

Optika Italy

Optika Italy Modular Series Manual de usuario

Optika Italy

Optika Italy SZO Series Manual de usuario

Optika Italy

Optika Italy CL-16.1 Manual de usuario

Optika Italy

Optika Italy B-60 Series Manual de usuario

Optika Italy

Optika Italy SZP Series Manual de usuario

Optika Italy

Optika Italy SZP Series Manual de usuario

Optika Italy

Optika Italy B-380 Series Manual de usuario

Optika Italy

Optika Italy B-190 Series Manual de usuario

Optika Italy

Optika Italy ACCESSORIES Series Manual de usuario

Optika Italy

Optika Italy ECOVISION Series Manual de usuario

Optika Italy

Optika Italy SZR Series Manual de usuario

Optika Italy

Optika Italy SFX Series Manual de usuario

Optika Italy

Optika Italy IM Series Manual de usuario

Optika Italy

Optika Italy B-290 Series Manual de usuario

Optika Italy

Optika Italy B-150D Series Manual de usuario

Optika Italy

Optika Italy IM Series Manual de usuario

Optika Italy

Optika Italy SZM-SMD Manual de usuario

Optika Italy

Optika Italy SLX Series Manual de usuario

Optika Italy

Optika Italy ACCESSORIES Series Manual de usuario

Optika Italy

Optika Italy ACCESSORIES Series Manual de usuario

Optika Italy

Optika Italy M-1157 Manual de usuario

Optika Italy

Optika Italy OPTIGEM Series Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario