OPTICOM EV4250 Instrucciones de instalación y mantenimiento
The specifications and information are subject to change without notice for quality improvement.
Network guide
EV4250
4 Channel MPEG-4 Digital Video Re order
About this user guide
Before installing and using this unit, please read this user guide carefully.
Be sure to keep it handy for later reference.
2
How to connect network
A. How to set IP address of the DVR and open TCP port of the router?
The port forwarding is dependant on the brand and model of the router. The port forwarding
is required to allow access to the DVR beyond a router.
. Connect network cable between DVR and Router or ADSL modem.
2. Default network setting on DVR are
- Port: 5445
- IP ADDRESS: 72. 6. .52
- Subnet mask: 255.255.0.0
- Gateway: 0.0.0.0
3. From PC connected in the same Router, find IP address, Gateway, and Subnet mask by IPCONFIG
command in command prompt.
4. But if IP is something else like 92. 68.x.xxx., you should change IP address, Subnet, Gateway on
the DVR. Go to SETUP>NETWORK>LAN of the DVR and change the IP settings to be like IP:
92. 68.XXX.XXX and Gateway: 92. 68.XXX.XXX. (Refer to the user’s manual of Router.)
Router or ADSL modem
3
5. Open your web browser. Enter the router IP address in the address bar (The router IP address are
different with the brand and model.), click GO.
6. Enter the user name and password (admin is default) and press the OK button.
7. Select the Port Range Forwarding tab.
8. Enter the each field.
i. Application: Enter a description of the DVR (Example: store )
ii. Start: Enter the first number of the port you need to port forward (Example: 5445)
iii. End: Enter the last number of the port you need to port forward (Example: 5445)
iv. Protocol: Select Both.
v. IP address: Enter the IP address of the DVR on SETUP>NETWORK>LAN>IP ADDRESS.
vi. Enable: Check the enable box.
9. Select the Save settings button located on the bottom of the window. Then Port forwarding is
finished.
You an learn how to port forward many kinds of Routers from the bellow site.
http://www.portforward. om/english/routers/port_forwarding/routerindex.htm
4
B. How to a ess DVR from Remote PC?
LAN Connection – Using a switching hub
Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-
T 100BASE-TX CAT 5 LAN cable)
. Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6. Network
access using the Exclusive network viewer)
2. Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR.
3. Run network client software and click button.
4. Input IP address, Port No., and Password on the connect window. And click OK.
Switch Hub
5
Internet (ADSL) Connection using DDNS
Connect to the system, using an Router or ADSL modem and an Ethernet cable ( 0BASE-T/ 00BASE-
TX CAT 5 LAN cable)
. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP and DDNS SERVER as ON. And make
sure that DDNS SERVER NAME is ddnscenter.com
2. Go to Setup menu of Router and open TCP port 5445 using Port Forwarding. (Refer to A. How to
set IP address of the DVR and open TCP port of the router?)
3. Confirm the Mac address and Serial No. from the label of the rear panel of the DVR.
4. Open the web browser and log on http://www.ddnscenter.com
MAC Address: Input the Mac address (EX. 0002690XXXXX) without a space.
Serial Number: Input the Serial No. (EX. 43000700XXX.) without a space.
Domain Name: Input Domain Name for your DVR system (Note. Input only Domain Name and
never input “ddnscenter.com”.)
5. Click the DUPLICATION CHECK button to see if the domain name is available.
6. If you see the screen “You can use the Domain name you entered” then click RETURN and click
REGISTER button to complete the registration.
Router or ADSL modem
Internet
6
7. Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6. Network
access using the Exclusive network viewer)
8. Click button and add the DVR as necessary.
Site Name: Input the name of the DVR.
IP Address: Input the Domain Name that is registered on http://www.ddnscenter.com (EX.
XXXXX.ddnscenter.com)
Port Number: Input the port number.
Protocol: Select TCP.
Password: Input the network password.
9. Click button.Then the Connect window is displayed.
0. Select the site that you access and click OK.
Otros manuales de DVR de OPTICOM
OPTICOM
OPTICOM OWM-402 Manual de usuario
OPTICOM
OPTICOM OWB-1600 - Manual de usuario
OPTICOM
OPTICOM OWB-805 Manual de usuario
OPTICOM
OPTICOM OWB-1605 Manual de usuario
OPTICOM
OPTICOM OWL - REV1.3 Manual de usuario
OPTICOM
OPTICOM OWE-1600 - Manual de usuario
OPTICOM
OPTICOM OWL-900 - Manual de usuario
OPTICOM
OPTICOM DIGITAL VIDEO RECORDER 2 - V 1.3 Manual de usuario
OPTICOM
OPTICOM OWB-1605 Manual de usuario
OPTICOM
OPTICOM Vista "L"ite Series DVR Manual de usuario
OPTICOM
OPTICOM OWM-400 - Manual de usuario
OPTICOM
OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER - V... Manual de usuario
OPTICOM
OPTICOM OWE-900 - Manual de usuario
OPTICOM
OPTICOM SVD-2416 Manual de usuario
OPTICOM
OPTICOM KD4 - Manual de usuario
OPTICOM
OPTICOM OWL-400 - Manual de usuario
OPTICOM
OPTICOM SDVR 1600 Manual de usuario
