Onida S093SMH Manual de usuario
The unit displayed is for representational purposes only. Actual unit may vary.
Warranty Registration System
Help us to serve you better by registering
your product for Warranty
Web Register at w
Telephone
Post / Visit Post the Warranty Registration Card &
ww.onida.com
Call Centre No. 0XX-39889000(0XX-STD Code of
State Capital)
Service Centre
Copy or Visit the Nearest Service Centre.
3 STAR 2 STAR
Model:
S093SMH,S122SMH,S182SMH,S123SMH,
S183SMH.
Dear customer
Congratulation on buying ONIDA Air Conditioner.
Your Air Conditioner comes with ONIDA Guarantee of Quality
as detailed in the manual.
ONIDA takes great pride in providing its customers with state-
of-the-art products that adheres to international quality
standards.
ONIDA is committed to following quality policy laid by our
chairman and managing director Mr. G. L. Mirchandani.
“We are committed to quality and strive for continuous
improvement through innovation and human development to
give customer better value for money always”
ONIDA stands committed to provide the ultimate customer
satisfaction, as nothing brings us greater joy than having
satisfied customers of ONIDA.
At ONIDA, feedback and suggestions based on your product
usage experience is greatly appreciated.
Please contact to us at r[email protected]
Dr. Y. V. Verma
Chief Executive Officer
IMPORTANT :
Please read this owner’s manual carefully and thoroughly
before installing and operating your room air conditioners.
Please retain this owner’s manual for future reference after
reading it thoroughly.
CONTENTS
Salient Features 1
Inside Overview 2
Indoor Unit Display 3
Remote Overview 4
Operations 5
General Instructions for Installation 12
Installation Sketch 15
Installation of Model 16
Take care of your Air Conditioner 20
Precautions to be taken 21
Trouble Shooting Chart 23
Installation and Satisfaction Report 25
Warranty Terms & Conditions 27
Preventive Maintenance Service Coupon 29
Warranty Card(Customer Copy) 31
Warranty Card(service Centre Copy) 33
SALIENT FEATURES
0.8T/ 1.0T / 1.5T Split Air Conditioner
S093SMH,S122SMH,S182SMH,S123SMH,S183SMH.
a) 3 Star / 2 Star Energy Saver BEE Rated
Smart Sleep with 4 personal preference modes
Turbo- Cool Function for Cooling in adverse Condition
f ) MY FAVORITE Mode
Model Code :
• Aesthetics:-
a) Unique Flat Panel
b) Sleek Indoor Unit
• Performance:-
b) High BTU Tropicalised Compressor
c) Trapezoidal Inner Grooved Tube
d) Large L - Shaped Condenser Coil
• Features:-
a) i-Cool Function- For Instant Cooling
b)
c)
d) 3 Stage Filtration- For Better Air Quality
e) Auto-Restart
• Safety & Reliability:-
a) Low Deration Factor
b) Hydrophilic Fins
c) Full Function LCD Remote
d) Special Insulation on the Air Vent
e) 5-Stage Epoxy Polyester Painting
f) Rugged Construction With Thicker Gauge Steel
1
32
INSIDE OVERVIEW
Deflector Remote controller
Display
Front panel
nINDOOR UNIT
Return warm Air in
Conditioned Air out
INDOOR UNIT DISPLAY
Display on the indoor unit.
For the icon of LED windows, only relevant icons will light up with their displays on.
Temperature display
Standby
Mode
Timer
Display
Sleep
iCOOL
nOUTDOOR UNIT
Connection
pipe and
connecting wire
Air in
Exhaust Air
54
REMOTE OVERVIEW OPERATIONS
1. Open back cover and put 2 Nos. AAA size alkaline batteries.
2. The remote signal can be reached upto six metres from the indoor unit.
3. When the button is pressed on remote, indoor unit will “beep” once, indicating
the receipt of signal. If no “beep” sound is heard, press the button once again.
4. Remove batteries if remote control has not been used for long time.
5. *Heat mode & Money Saved is not available with all models.
Operating Your Air Conditioner:
Your Split Air Conditioner can be conveniently operated using the intelligent cordless
remote control.
1. Switch on the MCB.
Press Standby button on remote handset to switch ON the AC.
All icons will glow once.
Your AC switches on with parameters that were set before power was switched
off. The unit receives the signal with "BEEP" tone and your AC starts operation.
Time Delay: To protect the compressor, a time delay is incorporated in the circuit.
The Time Delay ensures that the compressor switches ON only after a delay of about 3
minutes.
2. Press the “MODE” Button for Turbo, Auto, Cool, Dry, Eco or Fan Mode selection.
3. Press the "FAN” Button to set the Fan Speed. Each press changes the fan speed
from Low-Med.- High-Auto Fan speed. The selected fan setting symbol can be
seen on the LCD.
4. The Set Temp. is displayed on LCD, Press button ” + “ to increase and “ “ to the
decrease the temperature.
5. To switch off the AC, press the Standby Button.
Setting the Desired Room Temp.:
You can set the temp. at which you would like your room to be.
O
Press " " button to increase the set temp. On every press, the temp. increases by 1 C.
O
Press " " button to decrease the set temp. On every press, the temp. decreases by 1 C
The two digit display shows the set temp. on LCD.
O
The setting temp. range is from 16- 31 C.
-
+
-
Your split AC operates in one of six modes, TURBO-AUTO-COOL-DRY-ECO-FAN.
The modes button cyclically chooses between these operating modes.
*Cooling capacity measured at High speed, as per IS 1391:1992 Part 2
Standby
Mode
Timer
Display
Sleep
iCOOL
On /Off
Temperature Up
Fan Speed Adjustment
Operation Mode
Ceiling Fan Speed
IR Signal Window
Operation Display
Temperature Down
My Favorite Mode
iCOOL Mode
Sleep Mode
Swing Auto / Manual
IDU Display On/Off
On & Off Timer
76
The AUTO Mode :
1. Press "MODE" button to cyclically step through the
modes and stop when AUTO mode is selected.
2. Auto
3. In this mode, the fan speed is auto.
4. In the AUTO mode, You can change the temp.
The COOL mode:
In the cool mode, the compressor is in operation and your AC functions in the standard
operating mode, cooling your room to the desired set temp.
1. Press "MODE" button to cyclically step through the
modes and stop when cool mode is selected.
2. symbol can be seen on the Remote panel when you select the cool mode.
In this mode, you can change the temp. settings by pressing " " and temp. buttons.
You can change the fan speed setting by pressing FAN button.
3. If the Room temp. is more than the set temp., then the compressor & outdoor FAN will
remain ON and perform the Cooling operation. If the room temp. achieves the temp. less
than set temp., then the compressor & outdoor FAN will remain OFF.
The DRY Mode:
In the DRY mode, your AC reduces the humidity within the room faster.
O
When the room temp. is more than 16 C then only the DRY mode operates.
1. Press "MODE" button to cyclically step through the
modes and stop when DRY mode is selected.
2. symbol can be seen on the Remote panel when you select the DRY mode.
3. In DRY mode, Indoor FAN will run at low speed, Compressor & Outdoor Fan will remain
ON & run in preset temperature. Temperature can be change.
TURBO-AUTO-COOL-DRY-ECO-FAN
symbol can be seen on the Remote panel.
TURBO-AUTO-COOL-DRY-ECO-FAN
+" - "
TURBO-AUTO-COOL-DRY-ECO-FAN
The FAN Mode:
1. Press "MODE" button to cyclically step through the TURBO-AUTO-COOL-DRY-ECO-FAN
modes and stop when FAN mode is selected.
2. symbol can be seen on the Remote panel when you select the FAN mode.
3. In FAN mode, only Indoor FAN will run at set speed and Compressor & Outdoor Fan will
remain off.
4. In this mode, you can change the Indoor FAN Speed, but you can not set the desired TEMP.
OPERATIONS OPERATIONS
i-Cool (With Ceiling Fan Controller):-
One touch auto cooling control of AC & Ceiling Fan*.
This mode is activated by pressing i-cool key on remote. To enable mode to control Ceiling
Fan also, main switch of Ceiling Fan has to be in ON position.
In this mode initially the AC & Ceiling Fan start in special mode at super high speed
designed to give instant cooling and comfort. Compressor will start immediately in this
mode. After some time the AC and Ceiling Fan work at special mode which gives powerful
cooling along with energy savings. During this mode the speed of AC Fan and ceiling fan
changes automatically with time and temperature change. Set temperature also changes
automatically. During this operation both AC and Ceiling Fan are coordinated to ensure
speed cooling with energy savings. While AC is in this mode temp, Fan Speed, Timer, Sleep
keys are inactive and these parameters cannot be changed.
To quit i-cool mode Press MODE.
i-Cool (Without Ceiling Fan Controller):-
In case i-cool ceiling fan controller which is an optional accessory has not been installed, the
AC will work in special i-cool mode on pressing i-cool key on remote. In this mode initially the
AC work start at super high speed designed to give instant cooling and comfort.
Compressor will start immediately in this mode. (Fan noise will be higher during this period
due to higher air throw).After some time the AC will work at special mode which gives
powerful cooling along with energy savings. During this mode the speed of AC Fan speed
changes automatically with time and temperature change. Set temperature also changes
automatically. While AC is in this mode temp, Fan Speed, Timer, Sleep keys are inactive and
these parameters cannot be changed. To quit i-cool mode Press MODE Button.
* i-cool Ceiling Fan Controller is an optional accessory and is not part of the AC . Cost of i-
cool ceiling fan controller and its installation is extra and not included in the AC.
9 8
OPERATIONS
Turbo MODE:
TURBO-AUTO-COOL-DRY-ECO-FAN modes
and stop when TURBO mode is selected, It
ECO MODE:
selecting
Press Mode Button cyclically step through the
activates the Turbo function and air conditioner
goes to powerful cooling. During this Mode temperature and fan speed cannot be changed.
In this mode the AC works on a preset temperature of 18 degree centigrade at high fan
speed. Compressor will start immediately in this mode and will continue to operate till set
temperature is achieved .Thereafter it will work in cyclical ON/OFF mode to keep the room
temperature within 2 degree of set temperature. Press mode button again to cancel this
operation.
ECO mode on remote activates Energy Saver function to keep room normal
temperature by reducing compressor run hours to get more savings.
In this mode the AC works on a preset temperature of 25 degree centigrade at selectable fan
speed. Compressor will work in cyclical ON/OFF mode to keep the room temperature within 2
degree of set temperature. ( symbol will appear on remote control display).
In this mode temperature cannot be changed & Fan speed can be changed.
Press mode button again to cancel this operation.
Ceiling Fan Manual Operation – only when optional i-cool ceiling fan
controller is installed:
Ceiling fan speed can be controlled only through AC remote control as all other manual
controllers are bypassed while installing i-cool fan controller.
When AC is in any mode other then i-cool mode, Ceiling fan speed can be controlled using
remote control. To enable this Ceiling fan mains have to be in ON position. Press on
remote to start ceiling fan. Ceiling fan speeds can be changed by pressing key on remote
to increase and key on remote to decrease. The speeds can be varied by 5 steps by
pressing keys on remote. Press key on remote till the ceiling fan switch off.
My Favorite Mode:
In this mode user can set personal setting in which, Mode, Set Temp. Fan speed, Swing,
ceiling fan,sleep and OFF Timer can be set as per customer selection.
To set MY FAV mode Press & Hold MY FAV key for 5sec. MY FAV icon will blink, during icon
blinking customer can set all parameter mentioned above, After selection press again the MY
FAV key to register the settings. MY FAV settings done as per selection and AC will work as
per the selection. To come out of MY FAV mode, press again MY FAV MODE key. In this mode
all keys are deactive except MODE & ON/OFF key. When ever to select MY FAV mode again,
just press the My FAV mode key , AC will work as per the selection done previously.
SMART-SLEEP MODE: 123
3 Stage Smart-Sleep with 4 personal preference modes,
To switch on Smart-Sleep operation, press “SLEEP” button on remote and the indoor fan
will run at low speed. Press the same button four times to quit the Smart-Sleep mode.
OPERATIONS
Initial Sleep Stage Deep Sleep Stage Wake Up stage
Stage 1 Stage 2 Stage 3
Smart Sleep -Personal
Preference mode
Normal
Set Temperature -
31ºC - 16ºC
Cools at Set Temp + 1ºC / hour for
next 2 hours.
Cools at Set Temp + 2ºC after 2
hours
Cools at Set Temp + 2ºC after 2
hours
Set Temperature -
23ºC - 16ºC
Cools at Set Temp + 1ºC / hour for
next 3 hours.
Cools at Set Temp + 3ºC for
next 5 hours
Cools at Set Temp + 1ºC after 8
hrs
Set Temperature -
24ºC - 27ºC
Cools at Set Temp + 1ºC / hour for
next 2 hours.
Cools at Set Temp + 2ºC for
next 6 hours
Cools at Set Temp after 8 hrs
Set Temperature -
28ºC - 31ºC
Cools at Set Temp all along Cools at Set Temp all along Cools at Set Temp all along
Set Temperature -
23ºC - 16ºC
Cools at Set Temp + 1ºC / hour for
next 3 hours.
Cools at Set Temp + 3ºC for
next 4 hours
Cools at Set Temp + 2ºC after 7
hrs
Set Temperature -
24ºC - 27ºC
Cools at Set Temp + 1ºC / hour for
next 2 hours.
Cools at Set Temp + 2ºC for
next 5 hours
Cools at Set Temp + 1ºC after 7
hrs
Set Temperature -
28ºC - 31ºC
Cools at Set Temp all along Cools at Set Temp all along Cools at Set Temp all along
Set Temperature -
23ºC - 16ºC
Cools at Set Temp + 1ºC / hour for
next 3 hours.
Cools at Set Temp + 3ºC after
3 Hours
Cools at Set Temp + 3ºC after
3 Hours
Set Temperature -
24ºC - 27ºC
Cools at Set Temp + 1ºC / hour for
next 2 hours.
Cools at Set Temp + 2ºC after 2
hours
Cools at Set Temp + 2ºC after 2
hours
Set Temperature -
28ºC - 31ºC
Cools at Set Temp all along Cools at Set Temp all along Cools at Set Temp all along
Bio Sleep -Personal
Preference mode 2
Smart Sleep Personal
Preference modes Temperature Set
Condition
Bio Sleep -Personal
Preference mode 1
Bio Sleep -Personal
Preference mode 3
1110
OPERATIONS
TIMER Operation:
You can program your split AC to switch itself ON or OFF at particular time.
Maximum set time is 24 hrs, with 1.0 hr increment .
ON TIMER:
When the AC is "OFF" (in standby), press "TIMER" Button on remote to use this feature as the
TIMER. (make sure that MCB switch is "ON". The "TIMER-ON/OFF" light on Indoor unit will glow
ON.
For EXAMPLE:
Suppose you want to switch ON the AC after 8 hrs. Press "TIMER" button, when AC is in OFF
condition. Press the “TIMER” button 8 times to set 8 hrs time delay.
Press "TIMER" button to set on timer. Display on Remote will show "8”.
OFF TIMER:
When the AC is "ON", press "TIMER" Button on remote to use this feature as
the TIMER. The "TIMER" light on Indoor unit will glow ON.
For EXAMPLE:
Suppose you want to switch OFF the AC after 8 hrs. Press "TIMER" button, when AC is in ON
condition. Press button 8 times to set 8 hrs time delay.
Press "TIMER" button to set OFF timer. Display on Remote will show "8”.
CANCEL TIMER:
If you want to cancel the Timer , press the “TIMER“ button till the clock appears on the display
screen.
the “TIMER”
CLOCK SET:
+ -
+
-
As long as remote controller is power on, the clock will run and it can be adjusted in any
condition even when the air conditioner is off. While the remote is electrified for the
first time, the time is 0:00, means the clock counts the time automatically.
To adjust the clock press the “TIMER” button for 10 seconds,
the time of hour flashes, during this period add the time of hours by pressing the button
“ “ and reduce the time by pressing the button” “ .After setting the time of hour, press the
button “TIMER” again to adjust the time of minute(Do not need to press for 10seconds.)When
the time of minutes flashes, press the button “ “ to add time of minute, and press the button
“ “ to reduce it. Finish setting of minute, press the button TIMER ON/OFF for the third time to
confirm the clock.
OPERATIONS
Air Flow direction Adjustment:
Your split AC has oscillating louvers for uniform cooling around your room.
You can stop the oscillation if you so desire.
Up/Down Air Direction Adjustment:
1. 5 step air swing can be achieved for the one time Press “ ”
button on remote, the Up/Down air louvers will move to the
specific angle.
You can set 5 different angle settings, to set Up/Down louvers in
2. For the next Press “ “ button to start Up/Down Air Louver which
starts swinging automatically.
Press again the “ “ button to stop swinging at specific
position.
Left/Right Air Direction Adjustment:
Move manually, the left right air
louver at desired position as shown
in following figure.
Emergency Operation Switch:
In case the batteries in the remote are worn out, or remote is faulty or misseing, use
emergency operation switch (*) to ON/OFF AC.
Every time the switch is pressed, it changes in sequence of COOL Ý STOP.
O
In Emergency operation mode the set temperature will be 24 C, Fan speed will be
high and Up/Down Air louvers are in swinging mode.
To access emergency switch, open the grill as
shown in the figure.
order of (1) (2) (3) (4) (5)
1312
GENERAL INSTRUCTIONS FOR
INSTALLATION
Locating the indoor and outdoor units
properly will help optimise the performance of
your airconditioner. While your Onida /
Dealer's Technician will be happy to guide you
on the best location for your airconditioner,
here are a few helpful hints.
Locating the Indoor Unit
• Locate the IDU for the best cool air
circulation. Preferably, there should be
no obstructions nearby, as shown in the
adjacent figure.
• Do not locate the unit directly opposite a
door which is opened frequently. The
cold air will go out of the room each time
the door is opened, as shown in the
adjacent figure.
• All indoor units will form condensate water.
Please ensure that the condensate can
be drained out of the room to a toilet /
pantry, etc. The installation engineer will
make sure that a "U" bend is provided in
the drain to prevent insects from coming
into the room through the drain tube, as
shown in the adjacent figure.
GENERAL INSTRUCTIONS FOR
INSTALLATION
Locating the Outdoor Unit
The outdoor unit houses the compressor,
condenser fan and electrical components.
The heat removed from the room is expelled
to the atmosphere through the outdoor unit.
Once again, the Onida / dealer's Technician
will ensure optimal installation of the ODU for
you. However, the following information will
be of interest to you.
• The Outdoor Unit can be mounted on a
wall, sunshade or skirting.
• Ideally, the ODU should not be too
far a w a y f r o m t h e I D U; t h e
recommended distances are
marked in the adjacent figure.
• Ensure that air can pass freely through
the unit. Please allow at least 2 meters
free space on the air outlet side, and 0.3
meters on the air inlet side.
• If more than one ODU is to be installed,
they must be properly separated, so that
the warm air from the outlet of one does
not enter the inlet of the other.
Este manual sirve para los siguientes modelos
15
Tabla de contenidos
Otros manuales de Acondicionador de aire de Onida
Onida
Onida S09TRD-N4 Manual de usuario
Onida
Onida INV18SLH8 Manual de usuario
Onida
Onida INV18ELE7 Manual de usuario
Onida
Onida S09FLT-L3 Manual de usuario
Onida
Onida OV-R224P/Na-M Manual de usuario
Onida
Onida INV18SMT7 Manual de usuario
Onida
Onida S12FLT-N5 Manual de usuario
Onida
Onida S123CUR Manual de usuario
Onida
Onida W182FLT Manual de usuario
Onida
Onida S12GLS-N4 Manual de usuario
