ONEAC ON Series Manual del operador

ON Series®e UPS

For use with ON Series e 200 - 600 VA, 60 Hz model

ONEAC Corporation, a wholly owned subsidiary of Chloride Group, PLC was founded

in 1979. ONEAC designs and manufactures products that provide the highest level of

protection against power and data line disturbances, regardless of conditions.

ONEAC's comprehensive product lines include power conditioners, uninterruptible

power supplies, DC power solutions and voice & data line protection devices. With

ISO9001 certified manufacturing plants in the U.S. and U.K., ONEAC is dedicated to

demand-flow manufacturing and the highest quality standards.

Organizations whose productivity goals allow no possibility for system downtime use

ONEAC. They include many of the world's leading companies, in a wide range of

applications including telecommunication systems, information technology, retail

information systems, computer-integrated manufacturing systems, semiconductor test

equipment and biomedical instrumentation and information systems. Information on

ONEAC products and services is available on the Internet at www.oneac.com.

ONEAC USA ONEAC EUROPE

27944 North Bradley Road George Curl Way

Libertyville, IL 60048-9700 Southampton, Hampshire SO18 2RY

United States United Kingdom

Toll Free: (800) 327-8801 Tel: +44-(0)-2380 610311

Tel: (847) 816-6000 Fax: +44-(0)-2380 610852

Fax: (847) 680-5124

Visit our website: www.oneac.com

ONEAC, ON Series, Virtual Kelvin Ground and ONBoost are registered trademarks of

ONEAC Corporation. All other trademarks are the property of their respective companies.

whole or in part without permission is prohibited. All information subject to change without

notice.

Printed in the U.S.A. Part No. 913-383 Rev. D

User Instruction Manual

Desktop models

Wallmount models

A Chloride Power Protection Company A Chloride Power Protection Company

A HIGHER LEVEL OF CONFIDENCE A HIGHER LEVEL OF CONFIDENCE

ONEAC is a UL/BSI

registered firm,

Certification No.

A2900.

ON Series e UPS

ON Series e UPS User Instruction Manual

ON Series e UPS

User Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

Please read and save these instructions. This manual contains important

instructions for the ON Series e UPS. Follow these instructions during the

unpacking, installation and maintenance of the ON Series e UPS. If you have a

problem with the unit, please refer to Troubleshooting on page 24 before calling

ONEAC Technical Services.

Licenses andTrademarks

ONEAC, ON Series, ONBoost, and Virtual Kelvin Ground are all registered

trademarks of ONEAC Corporation.All other trademarks, product and corporate

names are the property of their respective owners.

in part without permission is prohibited. All information subject to change without notice.

913-383 Rev. D 9/05

ONEAC USA

27944 North Bradley Road

Libertyville, IL 60048-9700

USA

ONEAC EUROPE

George Curl Way

Southampton, Hampshire SO18 2RY

United Kingdom

Telephone: (847) 816-6000

Toll Free: (800) 327-8801

Facsimile: (847) 680-5124

Telephone: +44 (0) 2380 610311

Facsimile: +44 (0) 2380 610852

ON Series e UPS User Instruction Manual i

Introduction .......................................................................................1

Registering Your ONEAC UPS .............................................................1

Technical Support ...............................................................................1

FCC Compliance ................................................................................2

Safety .................................................................................................3

Set-up and Installation ........................................................................4

Unpacking and Inspection ............................................................4

Long Term Storage ......................................................................4

Ventilation ...................................................................................4

Grounding the Unit ......................................................................4

Set-up ..........................................................................................5

Connections ................................................................................6

Self Test .......................................................................................9

Front Panel ................................................................................10

Communications (Factory Installed Options) ...............................12

Features and Specifications ...............................................................14

Physical and Electrical Specifications ...........................................14

Specifications and Characteristics ...............................................15

Typical Runtime .........................................................................17

Safety & Approvals .....................................................................19

Battery Considerations .....................................................................20

Replacing Battery(ies): Standard and Wall-mount Units ..............20

Replacing External Battery Enclosure(s) .......................................22

Battery Disposal ................................................................................23

UPS Disposal ....................................................................................24

Troubleshooting ...............................................................................24

Warranty ..........................................................................................26

Batteries ....................................................................................26

Limitations of Warranty ..............................................................26

Exclusive Remedies .....................................................................26

Return Procedure .......................................................................26

Introduction

ON Series e UPS User Instruction Manual 1

Introduction

Thank you for selecting this uninterruptible

power supply (UPS). ONEAC’s ON Series

offers the most reliable protection from the

harmful effects of electrical line disturbances

for your computing and communications

equipment. ONEAC’s ISO 9001 certiﬁcation

represents our commitment to building

world-class products. We take pride in every

unit that leaves our manufacturing facility

RegisteringYour

ONEAC UPS

To ensure that your ON Series e UPS model and

serial number are registered, complete and mail

the enclosed postage-paid warranty card or go

on line at www.oneac.com.

Technical Support

ONEAC offers 24-hour technical support. To

contact ONEAC Technical Services:

• North America: (847) 816-6000, option 3

or toll free (800) 327-8801, option 3.

• Europe: +44 (0) 2380 610311

• email: [email protected].

Please check with ONEAC Technical Services

before attempting to repair or return any

ONEAC product. If an ONEAC UPS needs

repair or replacement, ONEAC Technical

Services will issue a Return Material

Authorization (RMA) number along with

instructions on how to return the UPS.

FCC Compliance

2 ON Series e UPS User Instruction Manual

FCC Compliance

ATTENTION:

Changes or modiﬁcations to this

unit not expressly approved by the party

responsible or in FCC compliance could void

the user’s authority to operate the equipment.

This equipment was tested and complies with

the limits for a ClassA digital device, pursuant

to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection

against harmful interference when the UPS is

operating in a commercial environment. The

UPS generates, uses, and can radiate radio

frequency energy. If installation and use is not

in accordance with the instruction manual, it

may cause harmful interference to radio

communications.

ATTENTION:

Operation of this equipment in a

residential area may cause harmful radio

communications interference. The user is

responsible for correcting the interference.

Please check with ONEAC Technical Services

before attempting to repair or return any

ONEAC product. If an ONEAC UPS needs

repair or replacement, ONEAC Technical

Services will issue a Return Material

Authorization (RMA) number along with

instructions on how to return the UPS.

Safety

ON Series e UPS User Instruction Manual 3

Safety

WARNING:

This equipment services power

from more than one source. The output

receptacles may have voltages present even

when the unit is unplugged.

UPSs present a different safety issue than most

electrical equipment because unplugging the

UPS puts it into backup mode. Unplugging the

UPS does not remove the electrical charge. To

ensure that the UPS is off, turn the power switch

“OFF” before unplugging the UPS from the

wall outlet.

CAUTION:

This unit is intended to be used in a

system that has a grounded neutral conductor.

CAUTION:

Operating this equipment without

proper grounding may present a risk of

electrical shock.

Do not use AC adaptors with only two

conductors to connect the input line cord to the

wall socket as this will not connect the earth

ground to the equipment.

WARNING:

Dangerous voltages are present

within this unit! There are no user-serviceable

parts inside.Any repairs or modiﬁcations by the

user may result in out-of-warranty repair

charges, unsafe electrical conditions, or

violation of electrical code.

Do not remove the cover. All repairs should be

done by qualiﬁed service personnel. Voltages

inside the UPS may be lethal. Internal

components are powered even when the power

switch is in the “OFF” position. Even with the

battery disconnected and the unit unplugged,

energy is stored in high voltage capacitors and

represents a severe shock hazard.

Set-up and Installation

4 ON Series e UPS User Instruction Manual

Set-up and

Installation

When selecting a location for your UPS, be sure

that the unit is near a properly wiredAC

electrical outlet and is easily accessible for all

other connections: equipment to UPS, optional

battery enclosure(s) and/or optional

communications cable.

NOTE:

When connecting the UPS, make sure

that the receptacle has power available and is

not controlled by a wall switch.

Unpacking and

Inspection

Before shipment, this product was tested,

inspected and found to be free of mechanical

and electrical defects. Upon receipt of your

UPS, carefully examine the packing containers

for any sign of physical damage. Notify the

carrier immediately if damage is present.After

inspecting, carefully unpack the UPS. Retain

the packaging materials for reuse or dispose of

the materials properly. Once unpacked, inspect

and test the unit for hidden damage that may

have occurred in transit. If damage is evident,

contact ONEAC Technical Services.

LongTerm Storage

Improper long-term UPS storage may damage

the UPS battery and invalidate the battery

warranty. Unplugging a UPS from itsAC utility

power source for an extended period of time

results in lost battery charge. Restoration of

charge to maximum capacity requires 24 - 48

hours.

Ventilation

The ventilation requirement for the ON Series e

UPS is a minimum of 2 inches (50 mm) of

clearance on all sides.

Do not cover or install the UPS in a conﬁned or

enclosed space.

Grounding the Unit

To eliminate shock hazard, the ONSerieseUPS

needs to be connected to a properly grounded

AC receptacle.

Before applying power, verify that the available

line voltage matches the voltage listed on the

rear-panel label.

Set-up and Installation

ON Series e UPS User Instruction Manual 5

CAUTION:

Interruption of the protective

grounding conductor or disconnection of the

protective earth terminal presents a potential

shock hazard that could result in personal

injury and damage to the equipment.

Set-up Mounting Wall-mount Extended Runtime

Units and Battery Enclosure(s)

Mount the power unit and battery enclosure(s)

on a 3/4 inch plywood (minimum) backboard.

Use the enclosed four (4) 1/4 inch x 1 inch

slotted-hex,washer-headwoodscrews.(Seeﬁg.

NOTE:

When mounting the UPS and external

battery enclosure(s), make sure that all

connections can be made easily without

twisting, pinching or stressing the cables or

connectors. Two (2) inches of clearance are

necessary if the battery enclosure(s) is mounted

below the UPS. Five (5) inches are needed if the

batteryenclosure(s) is mounted on either side of

the UPS. Due to the rising characteristics of

heat, mounting the battery enclosure(s) above

the UPS is not recommended.

1. Draw a straight, level, horizontal 8 inch line

on the backboard. This represents where the

top of the enclosure will be.

2. Mark two screw locations, on the line, 7-3/8

inch apart.

ﬁg. 1: Mounting the ON Series e Wall-mount UPS

8”

3/8”

Otros manuales para ON Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unión Postal Universal de ONEAC

ONEAC

ONEAC ONm 300 I Manual del operador

ONEAC

ONEAC Sinergy Series Manual de usuario

ONEAC

ONEAC S07KXAU Manual de usuario

ONEAC

ONEAC ON Series Manual del operador

ONEAC

ONEAC ON Series Manual del operador

ONEAC

ONEAC ONE404AG-SE Instrucciones de funcionamiento

ONEAC

ONEAC SE041XAT Manual del operador

ONEAC

ONEAC ON Series Manual de usuario

ONEAC

ONEAC ONePlus Series Manual del operador

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario