One Forall URC-7140 Hoja de especificaciones
• What is my
“Set Up Code again?
Find out which code is currently
set under each of the 4 device
modes.
My Code is?
1 5 5 6
DVDDVD
OFF
e.g. Macro on “red key”
STOP
& OFF
English
Extra features URC-7140
+
e.g.
Original
LOST
or
BROKE
remote
• Key Magic®
Allows you to obtain functions
from your LOST or BROKEN
original remote control.
• Mode Reassignment
How to set up two (or more)
devices of the same type.
• Macro
Allows you to send a se uence
of commands with the press
of a single key.
Command 3
page 2
Key Magic®
1
5
5
6
Missing function after
Set Up procedure
Philips
Sony
TV1
TV2
Command 1
Command 2
Macro on “red key” =
command 1: dvd STOP
command 2: dvd OFF
command 3: tv OFF
Obtain your Missing function through
our Customer Service requesting a
(5-digit) Key Magic® function code.
Then, simply follow the procedure
from page 3.
page 3
page 4
page 5
4
5
ress and release
the magic key.
6
Congratulations! You have successfully reassigned “sat” mode to become a
second “tv” mode.
ow simply follow “O E FOR ALL SimpleSet”, “Direct Code Set Up” or the
“Search Method” to program your television in sat mode.
How to reset a device mode to its original mode?
1) ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
2) ress 9 9 2.
3) Select the corresponding device mode you wish to reset to its original mode
(e.g. select sat).
4) ress the MAGIC key twice. The blue LED will blink twice.
ress and release the magic key. --> The blue LED will blink twice.
Select the
destination
device e.g. sat
1
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
ress 9 9 2. --> The blue LED will blink twice.
2
This feature gives you the possibility to program 2 (or more) of the same device types onto the O E FOR ALL remote (e.g. two tv’s).
In the following example you wish to set up an additional television. Therefore we will reassign (change) “sat” mode into “tv” mode.
e.g. How to reassign “sat” into “tv” so you can control your second
televion as well:
Philips Sony
TV1
TV2 +
2
3
Mode Reassignment
3 sec.
x2
Select the
corresponding
device e.g. TV
< select >
< select >
3 sec.
Select the
source
device e.g. tv
Key Magic®
3
2
3
How to reset a key to obtain its original function?
1) Select the corresponding device mode (e.g. tv).
2) ress and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
3) ress 9 9 4.
4) ress the corresponding key (e.g. red) twice.
Congratulations! You have successfully programmed the “I/II (mono/streo)”
function from your original remote control onto your O E FOR ALL remote
control. OW whenever you press the “red key” (in tv mode) you will obtain the
“I/II (mono/streo)” function.
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
ress 9 9 4.--> The blue LED will blink twice.
4
5
Enter the 5-digit function-code provided by Customer Service.
(e.g. 00123)
--> The blue LED will blink twice.
6
ress the key to which the function will
be assigned (e.g. red key).
Example: How to get the “I/II (mono/stereo)“ function from your original LOST or
BROKE remote onto the “red key” on your O E FOR ALL remote control.
Key Magic®
e.g.
Original
LOST
or
BROKE
remote
1
Key Magic® is an exclusive ONE FOR ALL feature. The design of the ONE FOR ALL ensures that many functions of your original remote control can be operated - even those that do not have
their own key on the ONE FOR ALL keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic® feature of your ONE FOR ALL. In order to program a certain
function with Key Magic® you need to know the corresponding function code. As the function codes vary with different types of devices, they cannot be found in the manual. You can request
your function codes through our consumer service help-line or by letter, fax or e-mail.
When you contact us please make sure to mention the following:
• The Current code you are using (see “What is my Set Up Code again?” )
• Device-type, Brand & Model-number of the corresponding device.
• Model-number of the original LOST or BROKEN remote control.
• How the function was labeled on your original remote control.
then;
Customer Service will provide you:
• A funcion-code (5-digit) for every requested function.
Once you obtain your function code(s) from customer service, programming
the code is easy:
x2
3 sec.
ress and release
the magic key.
< select >
ress the key to which
the function will be
assigned (e.g. red key).
Macro
4
7
8
9
ress and hold magic for 3 seconds --> The blue LED will blink twice and then switch off.
Congratulations! You have successfully programmed a macro on the “red” key.
OW, when you press the red key: 1st: dvd will STOP, 2nd: dvd switches OFF,
3rd: tv switches OFF. The remote will do this in every device mode whenever you
press the red key.
DVDDVD
OFF
Command 1: dvd STOP
Command 2: dvd OFF
Command 3: tv OFF
STOP
& OFF
ress the red key
You can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for
your convenience.
For example, you may want to create the following macro:
1st command: dvd --> STOP
2nd command: dvd --> OFF
3rd command: tv --> OFF
To set up the Macro mentioned above on the e.g. “Red” key on your ONE FOR ALL:
1
2
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
ress 9 9 5.--> The blue LED will blink twice.
3
4
5
6
ress the STO key
Command 1
Command 2
Command 3
How to reset the macro key to obtain its original function?
1) ress and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
2) ress 9 9 5.
3) ress the corresponding macro key (e.g. the red key).
4) ress and hold magic key for 3 sec. --> The blue LED will blink twice.
ress the OWER key
x2
3 sec.
< select >
3 sec.
ress the OWER key
Select the
corresponding
device e.g. DVD
< select >
Select the
corresponding
device e.g.TV
W at is my “Set Up Code” again?
5
Congratulations! You have successfully blinked out your current Set Up Code in tv
mode.
7
ress 4for the 1st digit of your 4-digit set up code and count how many times the LED
blinks. If the LED does not blink, the digit is “0”.
Your “Set Up Codes” :
You either set up your O E FOR ALL by:
• O E FOR ALL SimpleSet
• Direct Code Set Up
• Search Method
Example! How to find out which “Set Up Code” is currently set in tv mode:
1
3
ress and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
ress 9 9 0.--> The blue LED will blink twice.
4
2
5
ress 1for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
ress 2for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
Operational Reset
The Operational reset will erase all learned functions across all modes and some
other programmed functions like Key Magic and Macros.
1) ress and hold magic for 3 seconds until a mode indicator (Blue LED)
stays lit.
2) ress 9 8 0. The blue LED will blink twice.
6
ress 3for the 1st digit of your 4-digit set up code and count how many times the
LED blinks. If the LED does not blink, the digit is “0”.
??
??
??
??
x2
3 sec.
< select >
Select the
corresponding
device e.g.TV
Otros manuales para URC-7140
5
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Mando a distancia de One Forall
One Forall
One Forall URC 1035 Manual de usuario
One Forall
One Forall SMART STREAMER Manual de usuario
One Forall
One Forall URC-4300 Manual de usuario
One Forall
One Forall 6-DEVICE PVR Manual de usuario
One Forall
One Forall ESSENCE Series Manual de usuario
One Forall
One Forall URC-6820 Manual de usuario
One Forall
One Forall URC-8011 Manual de usuario
One Forall
One Forall URC-8820 B00 Manual de usuario
One Forall
One Forall URC-5705 Manual de usuario
One Forall
One Forall Kameleon URC-9962 Manual de usuario
One Forall
One Forall ONE SHOT Manual de usuario
One Forall
One Forall ONE FOR ALL URC3110 Manual de usuario
One Forall
One Forall URC 7145 Manual de usuario
One Forall
One Forall Contour TV URC1210 Manual de usuario
One Forall
One Forall URC 7115 Manual de usuario
One Forall
One Forall KAMELEON 3 Manual de usuario
One Forall
One Forall URC-6440 Guía del administrador
One Forall
One Forall URC 7115 Manual de usuario
One Forall
One Forall URC-7781 Manual de usuario
One Forall
One Forall URC-4021 Manual de usuario
