Omron Z550 Manual de usuario

Multi-Dimensional Sensor

Z550

Operation Manual

This manual explains menu operation method

and communication method with external

devices.

POWER

Cat.No. Z190-E1-02

Cat.No.Z190-E1-02 Multi-Dimensional Sensor Operation Manual

Authorized Distributor:

Cat. No. Z190-E1-02

In the interest of product improvement, specifications are

subject to change without notice.

Printed in Japan

0505-0.1M (1103) (M)

OMRON Corporation

Industrial Automation Company

Sensing Devices Division H.Q.

Application Sensors Division

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7068/Fax: (81)75-344-7107

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit,

Carl-Benz-Str. 4, D-71154 Nufringen,

Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg, IL 60173

U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,

#11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Road (M),

Shanghai, 200120 China

Tel: (86)21-5037-2222/Fax: (86)21-5037-2200

Operation Procedure and Reference Manual

The following shows main contents of operation steps and manuals. Select the manual suitable for your

purpose and read it before starting operation

INTRODUCTION

This operation manual describes the menu operations of the Controller. The Controller supports various

methods of inspection by combining measurement methods and various settings.

Please read this manual and related manuals thoroughly before using the Controller in order to operate it

properly.

POWER

Installation Wiring

Starting the Controller and Setting Workpieces in Place

Adjusting Images

Setting Measurement Conditions and Starting Measurement Outputting Data to External Device

Operation Manual

Explains menu operation method and communication method with external

devices.

Multi-Dimensional Sensor

Setup Manual

Multi-Dimensional Sensor

Operation Manual

Trademarks

•

Windows 95/98, Windows NT/2000 are registered trademarks of the Microsoft

Corporation in the United States and other countries.

• Hyper Terminal has been developed by Hilgraeve Inc. in the United States and are

also registered trademark of the Microsoft Corporation in the United States and other

countries.

This manual provides information on

system hardware. Be sure to read this

manualfirst.

This manual explains menu operation method

and communication method with external

devices.

Setup Manual

Contains information on safe use of the unit, series of procedures starting from

package content check, installation to cable connection, together with functions

and specifications of the unit and its peripheral devices.

INTRODUCTI SECTION 1SECTION 2SECTION 3SECTION 4

INTRODUCTION

SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 SECTION 7

INTRODUCTION

SECTION 1

SECTION 2

SECTION 3

SECTION 4

SECTION 5

SECTION 6

SECTION 7

Table of Contents/Menus

Features

Basic Operations

Setting Measurement Conditions (Expert Menu)

Other Functions

System Settings

Communication with External Devices

Troubleshooting and Maintenance

Operation Manual

Multi-Dimensional Sensor Z550

Z550-MC10/-MC15

operation.bookPage1Monday,June6,200510:19AM

INTRODUCTION

Table of Contents

Z550

Operation Manual

INTRODUCTION

Table of Contents

Introduction

Table of Contents 2

Searching from Menu Hierarchy 5

Editor's Note 8

SECTION 1 Features 11

Features of the Controller 12

Operational Flow 14

SECTION 2 Basic Operations 17

Starting Controller and Displaying Profile 18

Menu Operations 20

Screen Types and Display Methods 25

Image Monitor 26

Profile Monitor 28

Digital Monitor 30

Trend Monitor 31

Learning Basic Operations (Conversational Menu) 32

Step 1 Selecting the Sensor Installation Method 32

Step 2 Selecting the Measurement Method 34

Step 3 Setting the Measurement Region 36

Step 4 Adjusting the Sensitivity 37

Step 5 Setting Workpiece Position Detection Method 38

Step 6 Setting Measurement Items 40

Step 7 Starting Measurements 43

Saving Settings and Exiting Controller Operation 45

operation.bookPage2Monday,June6,200510:19AM

Z550

Operation Manual

INTRODUCTION

Table of Contents

INTRODUCTION

SECTION 3 Setting Measurement Conditions(Expert Menu) 47

Adjusting Images

Detection Method

Measurement Setting

Auxiliary Setting

Measurement Mode

Selecting the Measurement Method 48

Setting the Measurement Region 50

Changing the Sensitivity Adjustment Method 51

Setting the Workpiece Position Detection Method 56

Setting Measurement Items 70

Setting Calibration 100

Setting Span and Offset 107

Setting the Judgment Conditions 109

Selecting Hold Conditions for Measurement Values 111

Selecting Inclination Compensation Error Handing 113

Select the Display Unit 115

Setting Averaging Number 117

Setting Trigger for Hold Measurement 118

Using the Logging Function 126

Setting the Detailed Conditions 128

Selecting Measurement Mode 134

SECTION 4 Other Functions 135

Using the Force-Zero Function 136

Changing the Screen Display 141

Switching Scenes 156

Testing Measurement Performance (Test) 159

Checking the Line Beam Position

(Surrounding Image) 164

Backing up Setting Data 166

operation.bookPage3Monday,June6,200510:19AM

INTRODUCTION

Table of Contents

Z550

Operation Manual

INTRODUCTION

SECTION 5 System Settings 173

Entering the System Mode 174

Switching Menus 175

Selecting the Sensor Installation Method 176

Selecting Input Source of Scene Switching 177

Setting Conditions at Startup 178

Selecting How Height Coordinates are Handled 179

Selecting the Displayed Number of Digits(Decimal Part) 180

Using the Download Function 181

Initialization 183

Checking System Version 184

SECTION 6 Communication with External Devices 185

Analog Output 186

Terminal Block 188

RS-232C 193

Timing Charts 222

SECTION 7 Troubleshooting and Maintenance 235

Troubleshooting 236

operation.bookPage4Monday,June6,200510:19AM

Z550

Operation Manual

INTRODUCTION

Searching from Menu Hierarchy

INTRODUCTION

Searching from Menu Hierarchy

Conversational Menu

Start settings p.32

Measurement method

p.34

Region

p.36

Sensitivity p.37

Detect setting p.38

Measurement setting

p.40

(OUT0 to 7)

Height p.72 Changing p.98

Upper p.109

Step: 2 pts p.40

Step: 3 pts p.75

Edge position p.78

Width p.81

Peak/bottom p.85

Angle p.87

Area p.89

Arithmetic average

roughness

Maximum roughness

p.92

Define p.95

Calibrate

Output

Delete p.99 Lower p.109

Hold p.111

Zero p.136

Span p.107

Offset p.107

Slant error

Unit p.115

Edge center p.84

p.92

p.113

operation.bookPage5Monday,June6,200510:19AM

INTRODUCTION

Searching from Menu Hierarchy

Z550

Operation Manual

INTRODUCTION

Expert Menu

Image

Measurement setting

p.70

(OUT0 to 7)

Height p.72 Changing settings p.98

Upper

p.109

Step: 2 pts p.74

Step: 3 pts p.75

Edge position p.78

Width p.81

Edge center p.84

Peak/bottom p.85

Angel p.87

Area p.89

Arithmetic average

roughness

Maximum roughness

p.92

Define p.95

Calibration

Output condition

Clearing settings p.99 Lower p.109

Hold p.111

Zero p.136

Span p.107

Offset p.107

Slant error

Unit p.115

Measurement method p.48

Region

Sensitivity p.51

Details p.54

Height/Reflectance p.57

Slant correct p.67

Detect setting p.56

Height/position

correct

Reflectance correct

Measurement Mode p.134

Output setting Analog p.186

Te r mi n a l s

p.188

RS-232C p.193

Extra setting # to avg p.117

Hold&Logging

Details p.128

p.50

p.60

p.64

p.92

p.113

p.118

p.126

operation.bookPage6Monday,June6,200510:19AM

Z550

Operation Manual

INTRODUCTION

Searching from Menu Hierarchy

INTRODUCTION

Parts Common between Two Menus

Adjustment menu (called from the measurement screen by pressing the SHIFT

and ENT Keys.)

Scene p.156

Setting

Run p.43

Tools

System p.174

Save p.45

Submenus below this item vary depending on the submenu.

Communication

specification

Setting menu p.175

Initialize p.183

Version p.184

Sensor installation p.176

Startup monitor p.178

Test measurement p.159

Surrounding image p.164

Backup p.166

Profile p.197

1st scene p.178

Dec. pts p.180

Scene selection p.177

Height coordinates p.179

Environment setting

p.196

Download p.181

Output setting Analog p.186

Terminals p.188

RS-232C p.193

Extra setting # to avg p.117

Hold&Logging

Details p.128

Display setting p.141

Test p.159

Sensitivity p.51

Measurement setting

p.70

p.118

p.126

operation.bookPage7Monday,June6,200510:19AM

INTRODUCTION

Editor's Note

Z550

Operation Manual

INTRODUCTION

Editor's Note

Page Format

step7䊁䉴䊃䈜䉎/⸘󰶚䉕㐿ᆎ䈜䉎

⸳ቯ䈚䈢᧦ઙ䈪ᱜ䈚䈒⸘󰶚䈪䈐䉎䈎䉕䊁䉴䊃䈜䉎䇸⏕⹺䊝䊷䊄䇹䈫䇮ታ㓙䈮⸘󰶚䉕㐿ᆎ䈜

䉎䇸⸘󰶚䊝䊷䊄䇹䈮䈧䈇䈩⺑᣿䈚䉁䈜䇯

⸳ቯ䈚䈢᧦ઙ䈪ᱜ䈚䈒⸘󰶚䈪䈐䉎䈎䉕䊁䉴䊃䈚䉁䈚䉊䈉䇯

╙2┨䇭ၮᧄᠲ૞

⸳ቯ䊝䊷䊄䉕ᛮ䈔䈩䇮⥄േ⊛䈮⏕⹺䊝䊷䊄䈮౉䉍䉁䈜

⸘󰶚‛䈏⊕↹⚛䈮䈭䉎䉋䈉䈮㒢୯䇮㒢୯

䉕⸳ቯ䈚䈩䈒䈣䈘䈇

ᄖធ㐳ᣇᒻ䈫䈲

㪪㫐㫊㫋㪼㫄㩷㪪㪼㫋㫋㫀㫅㪾㫊

Setting Measurement Items

Up to eight measurement items can be set for each scene.

The measurement items that have been set for the outputs can be changed.

Changing Measurement Items

Clear any previously set measurement items in order to assign other measurement

items.

p.117

SECTION 3

Setting Measurement Conditions (Expert Menu)

Move the cursor to the output whose item is

to be changed, and press the ENT key.

Select [Change].2.

The options will be displayed.

The setting screen for measurement range

appears.

The remaining procedures are the same as

those for measurement item setting.

Operation Manual 31

Step 1

Sensor Installation Condition

Step 3

Measurement region setting

Step 4

Sensitivity adjustment

Step 5

Detection method

Step 6

Measurement setting

Step 2

Measurement method selection

SECTION 3

䃂Title of each section

䃂Header

Indicates the contents of the pag

䃂Sub-header

䃂Overview

Describes the overview and

operation flow of the section.

䃂Screen display

Indicates the status of the screen displayed on the left side.

䃂Index label

Indicates to which section the

current page belongs and

the contents of the page.

This allows the user to find

the target page quickly.

䃂Operation procedure and supplementary explanation

Helpful information regarding operation and reference pages is

introduced here using symbols.

䃂Overview and points of

the function described

⸳ቯ

* This page does not exist.

Operation Manual

Scn 0䂯䇭Set䂯

OUT0:Height

OUT1:Step: 2 pts

OUT2:

OUT3:

OUT4:

OUT5:

OUT6:

OUT7:

Scn 0䂯䇭Set䂯

Change

Calibrate

Output

Delete

SECTION 5

operation.bookPage8Monday,June6,200510:19AM

Otros manuales para Z550

Tabla de contenidos

Otros manuales de Accesorios de Omron

Omron

Omron E2EQ Manual de usuario

Omron

Omron E2EH-X Series Manual de usuario

Omron

Omron E2C-EDA Series Manual de usuario

Omron

Omron Z4M-W10 Manual de usuario

Omron

Omron Sti F3SJ-AM P Series Manual de usuario

Omron

Omron D6FZ Series Manual de usuario

Omron

Omron F3EM2-005 Series Manual de usuario

Omron

Omron Photomicrosensor (Transmissive) EE-SX1107 Manual de usuario

Omron

Omron E3MC - Manual de usuario

Omron

Omron E3X-NL - Manual de usuario

Omron

Omron E3X-DACLRX1P-M3J 0.3M Manual de usuario

Omron

Omron SYSMAC FH Series Guía del usuario

Omron

Omron E3V3 Manual de funcionamiento

Omron

Omron ZX-E - Manual de usuario

Omron

Omron E3Z series Manual de usuario

Omron

Omron F3M-S Series Manual de usuario

Omron

Omron E3T - Manual de usuario

Omron

Omron ZW-S7010 Instrucciones de funcionamiento

Omron

Omron E3S-CL1 Manual de usuario

Omron

Omron Sti F3SJ-AM P Series Instrucciones de funcionamiento y mantenimiento

Omron

Omron F160 Vision Sensor Manual de usuario

Omron

Omron Z4LB V2 Manual de usuario

Omron

Omron FQ SHORT Manual de usuario

Omron

Omron E3X-MDA Series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario