Omnicharge Omni 20 Manual de usuario

Quick Start Guide

Omni 20

www.omnicharge.co

230V AC / 300V HVDC

2

POWER YOUR NEXT ADVENTURE

For more information visit our support page at www.omnicharge.co

3

BEFORE USING

Calibrate the battery

1. Fully discharge Omnicharge until the screen turns off. Press the Power Button and you

should see an empty battery icon on the screen.

It's easy to do. Follow these steps:

To make sure the battery percentage reading is correct, please calibrate Omnicharge’s

battery when you first receive the product and periodically in the future.

2. Fully charge your Omnicharge to 100% to finish the calibration.

And that's it! Your Omnicharge's battery is calibrated.

.............................................................................................................................................................................................................................

73.000 W•h

0.00 W

0.00 W 99:99

24.3 °C

100%

4

Max output power: 100W

Double press the Power Button to enter the menu and choose Wall Socket option.

Next choose Output Mode.

AC OUTLET

1. Choose 230V AC/300V HVDC mode in the menu

2. Turn on AC/HVDC, the icon should appear on the screen

3. Power any device.

Note:

Only choose 300V HVDC if you are using a switch mode power supply, such as a laptop’s

AC power adaptor. Check our support page at www.omnicharge.co for more detailed

information.

PORT SETTINGS

GENERAL SETTINGS

ABOUT

EXIT

WALL SOCKET

DC OUT

USB

EXIT

230V AC

300V HVDC

73.000 W•h

0.00 W 99:99

24.3 °C

100%

65.04 W

AC

Laptop TV Drone DSLR Projector And more

AC

HV

DC

230V AC output

or

300V HVDC output

.............................................................................................................................................................................................................................

73.000 W•h

0.00 W 99:99

24.3 °C

100%

65.04 W

HV

DC

5

1V - 24V with 0.1V Accuracy, up to 3.5A (70W max)

DC OUTPUT

1. Find the correct voltage for your laptop from its power adaptor.

DC output cables may be included in the packaging. You can purchase additional cables

from our website. For more information about available accessories,

please visit www.omnicharge.co.

2. Set voltage through the menu

PORT SETTINGS

GENERAL SETTINGS

ABOUT

EXIT

WALL SOCKET

DC OUT

USB

EXIT

.............................................................................................................................................................................................................................

3. DC icon will appear on the screen

DC Adjustable DC output

.............................................................................................................................................................................................................................

4. Power your device through DC port

DC to MagSafe 2 Cable

DC to Surface

Connect Cable

..........................................................

Step 1 Step 2

20.0V

16.5V

15.0V

12.0V

Confirm 20.0V?

Incorrect setting may

harm your device.

Yes No

Step 3 Step 4

Note: Omnicharge keeps 4 sets of preset voltage.

Press and hold the power button to change the preset voltage on step 3.

Note: For more information visit our support page at www.omnicharge.co

73.000 W•h

20.00 V 99:99

24.3 °C

100%

70.00 W

DC

DC In / DC Out

5

6

RAPID-CHARGING

USB PORTS

1. Choose whether the USB output is On or Off when you turn on your Omnicharge

PORT SETTINGS

GENERAL SETTINGS

ABOUT

EXIT

WALL SOCKET

DC OUT

USB

EXIT

DEFAULT ON

DEFAULT OFF

.............................................................................................................................................................................................................................

USB Port 1: 5V/3A, USB Port 2: QC 3.0

USB sources

5-7 hours

AC wall charger

3 hours

Solar (up to 45W)

3-6 hours

Car power port (12V)

3 hours

Laptop adapter

3 hours

......................

Charging from the Wall

Use the included AC wall charger, or other power adapters like your laptop charger to

recharge your Omnicharge.

Note: Make sure the output voltage of your adapter falls within 4.5V - 36V range.

Use our brand specific DC-input tip. Omnicharge only accepts 5.5 x 2.1mm barrel plug.

DC Input 4.5V-36V, Up to 3A (2W - 45W)

THE OMNICHARGE MAY BE

RECHARGED IN A VARIETY OF WAYS

DC In / DC Out

7

PORTS AND BUTTONS

1. Power and Menu Button

2. USB Button

3. AC Outlet Button

4. AC Outlet

5. Quick Charge USB (Qualcomm 3.0 Compatible)

6. 5V/3A USB Port

7. DC Output and Input (5.5 x 2.1mm Barrel Port)

.............................................................................................................................................................................................................................

2

3

6

7

5

1

4

........................

8

BUTTON FUNCTIONS

SCREEN

OLED screen with real time metrics

MAIN CONTROLS

MENU CONTROLS

• Quick press to power on

• Long press to power off

• On/Off AC Outlet

• On/Off USB Ports

• Double press to enter the menu

• Quick press to select

• Move Up

• Move Down

.............................................................................................................................................................................................................................

73.000 W•h

99:99

24.3 °C

100%

AC DC

65.02 W

34.00 W

1. Battery Temperature

2. Battery Power Output (watt)

3. Power Input (watt)

4. Icon Display

5. Battery Remaining Capacity

6. Battery Level (+/- 1%)

7. Charge Time Remaining

Note: Calculated based on optimal level of power

input for your device and Omnicharge’s battery level

5 6

7

12

3

4

9

MENU NAVIGATION

Turn on DC output and set the voltage.

Choose whether the AC three-prong outlet will output 230V AC or 300V HVDC.

Choose whether the USB output is On or Off when you turn on your Omnicharge.

Set the OLED screen auto turn-off time here. The default setting is 1 min.

Choose whether or not your Omnicharge will automatically shut off.

Choose whether cooling fan will be enabled or disabled.

Choose Fahrenheit or Celsius here.

Find the model name, capacity, firmware version number and serial number here.

DC OUT

WALL SOCKET

USB

SCREEN OFF

AUTO SHUT OFF

COOLING FAN

TEMPERATURE

ABOUT

.............................................................................................................................................................................................................................

10

SCREEN ICON

AC

HV

DC

230V AC OUTPUT

300V HVDC OUTPUT

ADJUSTABLE DC OUTPUT

USB OUTPUT

CHARGING INPUT

OPTIMAL CHARGING

SOLAR CHARGING

COOLING FAN DISABLED

230V AC outlet is activated.

300V HVDC (high voltage DC) is activated.

Adjustable 1V-24V DC is activated.

USB ports are turned on.

Your Omnicharge is being charged.

Omnicharge is being charged at maximum power.

Omnicharge is being charged from solar power.

Cooling fan is deactivated.

Note: Charge time may be longer if turned off.

.............................................................................................................................................................................................................................

omnicharge Omni 20 Manual de usuario

Manuales populares de Accesorios de otras marcas