Omega Engineering High Speed Load Cell Interface Card... Manual de usuario
omega.com
e-mail: [email protected]
For latest product manuals:
omegamanual.info
User’s Guide
Shop online at
LCIC-WIM-BEN
High Speed
Load Cell Interface Card
Servicing North America:
U.S.A.: One Omega Drive, P.O. Box 4047
ISO 9001 Certified Stamford, CT 06907-0047
TEL: (203) 359-1660
FAX: (203) 359-7700
e-mail: [email protected]
Canada: 976 Bergar
Laval (Quebec) H7L 5A1, Canada
TEL: (514) 856-6928
FAX: (514) 856-6886
e-mail: [email protected]
For immediate technical or application assistance:
U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA®
Customer Service: 1-800-622-2378/1-800-622-BEST®
Engineering Service: 1-800-872-9436/1-800-USA-WHEN®
Mexico: En Espan˜ol: (001) 203-359-7803
FAX: (001) 203-359-7807
e-mail: [email protected]
Servicing Europe:
Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic
TEL: +420 (0)59 6311899
FAX: +420 (0)59 6311114
Toll Free: 0800-1-66342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: +49 (0)7056 9398-0
FAX: +49 (0)7056 9398-29
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom: One Omega Drive, River Bend Technology Centre
ISO 9001 Certified Northbank, Irlam, Manchester
M44 5BD United Kingdom
TEL: +44 (0)161 777 6611
FAX: +44 (0)161 777 6622
Toll Free in United Kingdom: 0800-488-488
e-mail: [email protected]
OMEGAnet®Online Service Internet e-mail
omega.com [email protected]
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA accepts
no liability for any errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.
2
Table of Contents
1. Introduction
1.1 General Description
1.2 Typical Applications
2. Installing the board in the PC
3. Utilities
3.1 Setup & Running
3.2 The Calibration Utility
3.2.1 General
3.2.2 The Calibrations Library
3.2.3 Parameters
3.2.4 Calibration Efficiency (CE)
3.3 The Settings Utility
3.3.1 The Menu Bar
3.3.1.1 Tools / Analog Output
3.3.1.2 Tools / Baud Rate for SCI port
3.3.1.3 Tools / General Setpoints
3.3.2 Parameters
3.3.2.1 Communication
3.3.2.1.1 Port
3.3.2.1.2 Baud Rate
3.3.2.1.3 RS485 Address
3.3.2.1.4 Get results immediately
3.3.2.2 Auto Zero
3.3.2.2.1 Activate
3.3.2.2.2 Max Zero
3.3.2.2.3 Min Zero
3.3.2.2.4 Time limit
3.3.2.3 Start Fill-mode
3.3.2.3.1 Fill-mode starts automatically upon card reset
3.3.2.4 Filtering
3.3.2.5 Filling Definition
3
4. Programming your Application
4.1 Commands
4.2 Parameters
4.3 LCIC-WIM ActiveX
4.3.1 Start/Stop Communication
4.3.2 Variables
4.3.3 Filters
4.3.4 Fast Mode
4.3.5 Misc.
4
Appendices
A. I/O & the LED Display
A.1 General Notes about the I/O
A.2 Connecting External Devices to the Inputs
A.3 LCIC-WIM I/O & Analog Out
A.4 The LED Display
B. Scaling the Load Cell Input
C. Load Cell Connections
D. USB, RS232 & RS485
D.1 Communication Parameters
D.2 Baud Rate
D.3 General RS232 Terminal
D.4 Serial Communication & PC Power On/Off
D.5 RS485
E. Fill Mode
E.1 Introduction
E.2 Hardware Inputs
E.3 Hardware Outputs
E.4 Filling Parameters
E.4.1 Filling By = Weight
E.4.1.1 Filling by Weight Parameters
E.4.1.2 Auto Tare
E.4.1.3 Valid Results Limits
E.4.1.4 Stabilization Criterion (Tare & Stop)
E.4.1.5 Lazy Filling
E.4.2 Filling By = Time
E.4.2.1 Filling by Time Parameters
E.4.2.2 Stabilization Criterion (Stop)
E.4.3 Fast Speed Config
E.4.4 The Filling Configurations Library
E.5 LED Display Notations
E.6 Commands
E.7 Error Codes
F. Specifications
F.1 Load Cell Input
F.2 A/D
F.3 Digital Inputs
F.4 Digital & Analog Outputs
F.5 Standard Interfaces
F.6 Software
5
F.7 Dimensions (mm)
F.8 Misc.
G. Trouble-shooting
G.1 Card does not respond after PC power-on
H. Zero & Tare
H.1 The Zero function
H.2 The Auto-Tare function
6
1. Introduction
1.1 General Description
The model LCIC-WIM is a very High Speed, Intelligent Load Cell
Interface Card with USB/RS232/RS485. Besides its basic mode – named
below as the general mode – the board includes an integral Fill Mode
supplying an independent filling control. The board is intelligent and
powerful enough for OEM customers – it is ready to accept piggy-back
modules and/or embedded applications for OEM special requirements.
1.2 Typical Applications
• Dynamic weighing – vehicles, livestock
• Dynamic force measurement
• High speed checkweighing
• High speed filling / batching
• Beltweighing
• Force measurement / Press Machines
• WIM-Monitor for analysis of dynamic systems
7
2. Installing the board in the PC
(The following description refers to Windows XP. Obviously, on
another operating system it might be different.)
1. Make sure that all installation files have been copied to your
hard disk to a new folder, say, LCIC-WIM.
2. Connect the LCIC-WIM board to your PC.
3. The ‘Found New Hardware Wizard’ appears.
Select the last option like this:
Click ‘Next’.
8
4. Select the second option, click ‘Next’ and browse to the
“FTDI - VCP (Virtual COM Port) Driver” folder (under the
folder where you copied the installation files in step 1).
Click ‘Next’.
9
5. After a while, you’ll have this display:
Click ‘Finish’.
Notes
1. It might occur that the wizard will return to step 3,
requiring to repeat the process. This is normal, just repeat
steps 3-5.
2. You may watch the new driver in ‘Add/Remove programs’:
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de grabación de Omega Engineering
Omega Engineering
Omega Engineering OM-51 Manual de usuario
Omega Engineering
Omega Engineering Rercorder RD8300 Manual de usuario
Omega Engineering
Omega Engineering RD260A Manual de usuario
Omega Engineering
Omega Engineering DAQ-16 Manual de usuario
Omega Engineering
Omega Engineering OMB-CHARTSCAN 1400 Manual de usuario
Manuales populares de Equipo de grabación de otras marcas
Strymon
Strymon NIGHTSKY Manual de usuario
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario
Tews Technologies
Tews Technologies TPMC465 Manual de usuario
Honeywell
Honeywell Excel 50 Manual de usuario
SeaLevel
SeaLevel COMM+8.LPCI Manual de usuario
Arturia
Arturia AUDIOFUSE STUDIO Manual de usuario
