Olympus AS2400 - AS Transcription Kit Manual de usuario
PC TRANSCRIPTION KIT
AS-2400
EN
INSTRUCTIONS
INSTRUCTIONS
ИНСТРУКЦИЯ
EN
2
DSS Player StandardTranscription Module
Features
- Plays DSS, DSS Pro, WMA, MP3 and WAV/AIFF audio formats in the background
when another application is running, such as a word processor.
- Enables foot switch control of the playback process.
- Transcription can be done by combining the playback sound with the adjustable
playback speed, tone control, and noise cancellation.
However, it is not possible to playback while setting the playback speed and noise
cancellation simultaneously with the Macintosh version.
- Voice recognition of dictation files is possible with the Dragon Naturally Speaking 8.0
and later.*
- Automatic software update through Internet.*
- 2 modes/views of operation for Transcribe bar.*
* Windows only
●OLYMPUS IMAGING CORP. holds the copyrights for DSS Player Standard Transcription
Module software and the instructions (this manual).
●Microsoft and Windows are registered trademarks of Microsoft Corporation.
●Apple, Macintosh, iMac, eMac, Mac, and PowerMac are trademarks or registered
trademarks of Apple Computer, Inc.
●Intel and Pentium are registered trademarks of Intel Corporation.
●Dragon NaturallySpeaking is registered trademark of Nuance Communications, Inc.
●Other product and brand names mentioned herein may be the trademarks or registered
trademarks of their respective owners.
3
Table of Contents
Getting Ready
Introduction
Let’s Get Started
User Support
Minimum Requirement ......................... 4
Installing DSS Player Software ............ 5
Uninstalling DSS Player Software ........ 6
Using Online Help................................. 7
Running DSS Player Software ............. 8
Connecting the RS27/RS28 Foot Switch ....
10
Connecting the E102 Headset ........... 11
Window Names ................................... 12
Technical Assistance and Support ..... 13
4
Minimum Requirement
Minimum Requirement
Macintosh
Windows
Operating System:
CPU:
RAM:
Hard drive space:
Display:
USB port:
Notes
•Macintosh version does not support voice recognition software.
•Currently supported OS are listed on our Web page. For the latest information, please visit the Olympus Web site at
http://www.olympus-global.com/en/global/.
Mac OS X 10.3.9 - 10.5
Power PC G3 500MHz or more/Intel Core Sole/Duo 1.5GHz or more
256MB or more (512MB or more is recommended)
200MB or more
1024 x 768 pixels or more, 32000 colors more
One or more free ports
Operating System:
CPU:
RAM:
Hard drive space:
Drive:
Display:
USB port:
Audio I/O terminals:
Windows 2000 Professional Service Pack 4
Windows XP Home edition Service Pack 2,3
Windows XP Professional Service Pack 2,3 (32bit/64bit)
Windows Vista Home Basic, Service Pack 1 (32bit/64bit)
Windows Vista Home Premium, Service Pack 1 (32bit/64bit)
Windows Vista Business, Service Pack 1 (32bit/64bit)
Windows Vista Enterprise, Service Pack 1 (32bit/64bit)
Windows Vista Ultimate, Service Pack 1 (32bit/64bit)
Windows 2000/XP: Intel Pentium III 500MHz processor or more
Windows Vista: Intel Pentium III 800MHz processor or more
Windows 2000/XP: 128MB or more (256MB or more recommended)
Windows Vista: 512MB or more (1GB or more recommended)
Transcription Module: 70MB or more;
(700MB or more with Microsoft .NET Framework Version 2.0 not installed)
CD or DVD drive
800 x 600 pixels or more, 65536 colors more (16.77 million colors or more
recommended)
With the Transcription Module: One or more free ports available
With the Transcription Module: A Microsoft WDM- or MME-compliant and
Windows-compatible sound device
5
Installing DSS Player Software
Installing DSS Player Software
Be sure to confirm the following before installation:
• Exit all running applications.
• Eject the floppy disk if you are using one.
• If you are running Windows 2000/XP/Vista or Mac OS X on the network, you need to log on
as an Administrator.
1
Insert Olympus DSS Player CD into the
CD-ROM drive.
The installation program will start automatically.
If the installation program does not start
automatically, browse your CD-ROM drive and
execute “launcher.exe”.
2
The launcher will startup.
Select the language you would like to install from
the upper-left pull-down menu and click [DSS
Player Standard Installation].
3
The Install Wizard will begin.
Once you have consented to the licensing
agreement, enter your name, company name, and
license ID number (serial number).
The license ID number is printed on the license ID
card included inside the Transcription Kits package.
4
Proceed with the installation according
to the instructions on the screen.
Macintosh
1
Insert Olympus DSS Player CD into the
CD-ROM drive.
2
Double-click the CD icon.
3
Double-click the setup icon.
The Install Wizard will begin.
Once you have consented to the licensing agreement,
follow the instructions on the screen to complete the
installation.
4
Proceed with the installation according
to the instructions on the screen.
5
You will be requested to restart, so
conduct a restart by following the
instructions.
Windows
6
Uninstalling DSS Player Software
Uninstalling DSS Player Software
Windows
1
Exit DSS Player program.
2
Click the [start] button on the taskbar.
3
Select [Add/Remove programs] from the
[Control Panel].
A list of installed applications is displayed.
4
Select [Olympus DSS Player Standard],
then click the [Change/Remove] button.
5
Proceed with the uninstallation according
to the instructions on the screen.
Macintosh
1
Exit DSS Player program.
2
Double click “DSS Uninstaller”in
[Applications] =[DSS Player] folder.
An uninstaller is displayed.
3
Proceed with the uninstallation according
to the instructions on the screen.
Note
•The dictation files you made are stored in the [MESSAGE]
folder. If you don’t need them, delete them. You can
confirm the location of the [MESSAGE] folder by clicking
on [Options] in the [Tools] menu before uninstalling.
7
Using Online Help
For information on the DSS Player usage and features, refer to the Online help.
To start Online help:
Windows
1
Click the [start] button, then select [All
Programs], [Olympus DSS Player
Standard], [Transcription Module Help].
2
While DSS Player is running,select the [Help]
menu, [Contents].
3
While DSS Player is running, press F1 on the
keyboard.
Macintosh
While DSS Player is running, select [DSS
Player Help] from the [Help] menu.
Note
•Online help is available after the DSS Player is installed
(☞P.5).
Using Online Help
8
Running DSS Player Software
Running DSS Player Software
By default, connecting the recorder to your PC, will start the application automatically. Connect
to your PC Using the Cradle.
Windows
Disabling Automatic Start
1
Right-click the Device Detector in the
System Tray in the lower right-hand
corner of the screen, then select
[Setting...].
2
Click [DSS Player Standard Transcription
Module].
The check mark on [DSS Player Standard Transcription
Module] disappears.
Manual Start
1
Click the [start] button, then select [All
Programs].
All program menu will be displayed.
2
Select [Olympus DSS Player Standard],
then click [Transcription Module].
Note
•If you install DSS Player Standard, Device Detector that
makes DSS Player run automatically when connecting
Olympus Digital Voice Recorder will be installed.Device
Detector will always be displayed as icon in the task
tray.
1 2
9
1
Macintosh
Disabling Automatic Start
1
Click the Dock’s System Preferences.
2
Click Device Detector.
3
Turn the automatic startup setting Off.
Manual Start
1
Double click the DSS Player icon for the
folder in [Applications] =[DSS Player].
All program menu will be displayed.
2
Register user information
The user’s registration screen will be displayed at
the time of initial startup. Please input the serial
number. Please see the seal attached to the CD-
ROM package included with the DSS Player, for
the serial number. After the input has ended, click
[OK] to complete the registration.
Running DSS Player Software
2
Running DSS Player Software
10
Connecting the RS27/RS28 Foot Switch
Connecting the RS27/RS28 Foot Switch
Connecting to a Serial Port
1
Connect the foot switch cable to
the serial adapter cable.
2
Connect the serial adapter cable to
the PC’s serial port.
12
12
USB adapter
Serial adapter
Connecting to a USB Port
1
Connect the foot switch cable to
the USB adapter cable.
2
Connect the USB adapter cable to
the PC’s USB port.
Note
•The RS27/RS28 foot switch works only with the DSS Player.
Windows
Macintosh
Windows
Otros manuales para AS2400 - AS Transcription Kit
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de Olympus
Olympus
Olympus BL-AC10DS-A2 Manual de usuario
Olympus
Olympus MV-1 Manual de instrucciones
Olympus
Olympus AS2400 - AS Transcription Kit Instrucciones de montaje
Olympus
Olympus AS5000 - Transcription Kit - Digital Voice... Instrucciones de montaje
Olympus
Olympus AS-2300 Manual de usuario
Olympus
Olympus AS5000 - Transcription Kit - Digital Voice... Guía de configuración
Olympus
Olympus AS-7000 Manual de usuario
Olympus
Olympus AS5000 - Transcription Kit - Digital Voice... Manual de usuario
Olympus
Olympus AS4000 - AS Transcription Kit Instrucciones de montaje
Olympus
Olympus AS2400 - AS Transcription Kit Guía de configuración
