OLT GGC63-TG-CEDAR Manual de usuario

Important Information:

- It is the sole responsibility of the customer to check with your local municipal or county by-laws before

ordering this product to confirm it complies with building codes in your area.

- If the product is elevated, any structural and building code requirements are solely the customer's

responsibility, and should be abided by.

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep

snow off roof frequently.

- In areas with high or gusty wind conditions, it is advisable to install the structure securely to the ground.

- Have a regular maintenance plan to ensure screws, doors, windows and parts are tightly affixed.

- All structures purchased from Outdoor Living Today are covered for a period of one year for defects in

manufacturing and workmanship. Costs incurred for customer installations are not included.

- Failure to use supplied parts included in this kit could result in poor product performance and may void your

warranty. Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our

written instructions.

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 1

Thank you for purchasing a

6x3 Grand Garden Chalet.

Please take the time to

identify all the parts prior to

assembly.

6x3 GRAND

GARDEN CHALET

WITH CEDAR ROOF

ASSEMBLY MANUAL

Version #1.1

May 3, 2023

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support Line

@ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to courier

replacement parts, free of charge, within 10 business days of this notification. Replacement parts will not be

provided free of charge after the 30 day grace period.

Stock Code:

GGC63-TG-CEDAR

Customer agrees to hold Outdoor Living Today and any Authorized Dealers free of any liability for improper

installation, maintenance and repair.

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 2

What to do before my Shed arrives?

Become familiar with this assembly manual and determine if you can•

complete the project yourself or will require a professional contractor.

Clear the construction area and ensure a clear pathway for delivery when•

the freight company arrives. Remove all debris: roots, grass, rocks, etc.

Excavate the site. Contact your local utilities company to ensure there are•

no gas or electric lines buried in the area before digging.

Decide on the type of foundation you will be using:•

 Concrete slab, or

 46 inches of crushed gravel with paver stones or 4x4 stringers.

You can find the footprint for your shed on Page 3 of your Assembly

Manual.

If doing the assembly yourself, have all the necessary tools ready to go•

and in working condition. A list of required tools can be found after the

parts list.

One helper is recommended to assist in constructing your chalet.•

It generally takes two people less than a day to assemble a chalet. If you’re

hiring a contractor, their rate should be in line with that duration of work.

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 3

Foundation Types for 6x3 Garden Shed

Concrete Slab Foundation:

- Slab must be at least the same size as assembled floor frame (35” x 73”) or larger.

- 6” Deep foundation.

- 0.6 Cubic Yards of concrete required.

- A concrete slab will have the longest durability out of your foundation options.

Once level, a concrete slab is the easiest surface to build on.

Gravel with 4x4 Pressure Treated Stringers:

- Excavate at least 6” deep, and 6” wider than floor frame on each side.

- 0.6 Cubic Yards of gravel required, approximately 6 wheelbarrows.

- 5 - 4x4 Pressure Treated Stringers 34 3/4” long required.

- Evenly spaced, with one at each end of floor frame.

Saves money on materials, easy to level and work with.

Gravel with Patio Paver Stones:

- Excavate at least 6” deep, and 6” wider than floor frame on each side.

- 0.6 Cubic Yards of gravel required, approximately 6 wheelbarrows.

- 8 patio pavers (8” x 8” or larger).

- Center patio paver stones underneath floor runners and underneath seams in floor joists.

Patio paver stones are widely available from most landscape stores.

86 1/4”

47 3/4”

6” Deep

5 - 4”x4”x34 3/4”

8 Patio Stones

Floor FrameConcrete Foundation Completed Foundation

14 3/16”

Gravel Foundation Gravel Foundation with treated stringers Completed Foundation

Gravel Foundation Gravel Foundation with Patio Pavers Completed Foundation

73”

35”

86 1/4”

47 3/4”

86 1/4”

47 3/4”

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 4

Thank you for purchasing our 6x3 Grand Garden Chalet.

Please take the time to identify all the parts prior to assembly.

Note: Trim and Skirting pieces are graded with the best face being rough sawn.

Rough sawn cedar is much easier to paint and stain.

Parts List

A. - Floor Section

Floors

1 - Floor Section - 35” x 73”

1 - Mid Floor Joist - 1 1/2” x 2 1/2” x 70”

Steps

B. - Wall Section

Main Wall Panels

4 - Rear/Side Walls - 35” x 63 1/4” - Identical

4 - Top Wall Plates - 1 1/2” x 1 1/2” x 35”

2 - Front Narrow Walls - 12 1/2” x 61 3/4” - Identical

Header/Wall Extenders

1 - Front Header - 1 1/2” x 1 1/2” x 70”

1 - Interior Door Header - 1 1/2” x 1 1/2” x 44 7/8”

2 - Left/Right Side Angle Gables - 6 1/2” x 35”

2 - Wall Extenders - 6 1/4” x 35”

1 - Front Top Plate - 1 1/2” x 1 1/2” x 70”

Shelves

Storage Shelf Supports

Short (2 - 3/4” x 2 1/2” x 12 1/2”)

Long (2 - 3/4” x 2 1/2” x 35”)

2 - Storage Shelves - 11 1/2” x 31 7/8”

2 - 11

12 - 23

24 - 25

C. - Roof Section

Roof

1 - Cedar Shingle Roof Panel - 38 3/4” x 78 1/4”

26 - 27

D. - Trim / Misc. Section

Lower Skirting

2 - Lower Rear Skirting - 1/2” x 2 1/2” x 35”

2 - Lower Side Skirting - 1/2” x 2 1/2” x 33”

Lower Front Skirting

Short (2 - 1/2” x 2 1/2” x 11 1/8”)

Long (1 - 1/2” x 2 1/2” x 47 1/4”)

Filler Trim

8 - Front/Rear Filler Trims - 5/8” x 1 1/2” x 30”

1 - Front Header Filler Strip - 5/8” x 1” x 69 1/2”

1 - Front Top Plate Filler Strip - 5/8” x 1 1/2” x 69 1/2”

30 - 33

D. - Trim / Misc. Section Cont.

Outer Wall Trim and Fascia

1 - Upper Rear Horizontal Trim - 1/2” x 2 1/2” x 74 1/4”

2 - Side Fascia Trims - 1/2” x 2 1/2” x 37 5/8” - Angle Cut

Ends

2 - Rear Wide Corner Trims - 1/2” x 3 1/2” x 70 3/8”

2 - Rear Side Corner Trims - 1/2” x 2 1/2” x 70 3/8” - Angle

Cut End

2 - Front Wide Corner Trims - 1/2” x 3 1/2” x 67 3/4”

2 - Front Side Corner Trims - 1/2” x 2 1/2” x 65 1/2” - Angle

Cut End

1 - Rear Center Trim - 1/2” x 2 1/2” x 70 3/8”

2 - Vertical Door Frame Trim - 1/2” x 2 1/2” x 64 1/4”

Door System

1 - Door Threshold (Bevel) - 1/2” x 2 5/8” x 44 7/8”

2 - Left/Right Doors - 22 1/4” x 61 3/8”

1 - Door Flange - 1/2” x 2 1/2” x 61 3/8”

4 - Interior Vertical Door Stops - 3/4” x 3/4” x 29 7/8”

Miscellaneous

1 - Front Horizontal Trim - 1/2” x 3” x 67 1/4”

1 - Metal Drip Edge - 60”

2 - Roof Ridge Caps - 1/2” x 3 1/2” x 39 1/4”

** Plus 2 Cedar Shingle Shims - discard after shimming

doors

Steps

34 - 40

41 - 53

54 - 55

Note: We recommend you drill a 1/8” pilot hole for each

screw to avoid splitting wood. The hole depth should be

equal to 3/4 the length of screw.

Tools Required (Not Provided)

Safety Equipment Required (Not Provided)

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 5

6x3 GRAND GARDEN CHALET - CEDAR ROOF

Safety Glasses

Work Gloves

Ladder

Screw Gun/Drill Tape Measure

Hammer Wood Clamp

Level Pliers 1/8” & 3/8” Drill Bits

3/8” Wrench

Hardware Kit (Provided)

3/4”

1 1/2”

T Hinge

x 4 pcs

Door

Handle

x 2 pcs

Black Headed Screw

Finishing

Square Drive Bit

Silver

Barrel Bolt

Drop Latch

1 1/2”

Black Headed Bolt with Silver Nut and Washer

24 pcs

195 pcs

4 pcs

1 pc

1/2” x 2 1/2” x 2 1/2”

Plywood Spacer

2 1/2”

3/4”

2”

Black Headed Screw

Silver

1 1/4”

115 pcs

14 pcs

16 pcs

5 pcs

1” 7 pcs

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 6

Regular Maintenance & Tips to prolong the life of your shed.

Before/During Assembly:

1.) Paint each face and edge of your plywood floor with a latex exterior paint.

2.) Caulk wall seams if gaps appear.

3.) Caulk around window framing.

4.) Caulk perimeter between floor plywood and bottom wall plate.

5.) Caulk channels in lap siding at the top of your door above the trim, just a drop in each channel.

6.) Caulk edge of door threshold.

7.) Optional: Install a Sill Gasket between floor runners and foundation.

8.) Optional: Install an 8” strip of roofing paper below Cedar Ridge Caps for Cedar Roof Sheds.

Routine Maintenance:

- Routinely check all fasteners are tight (ex. Door Hinges, Nails)

- Brush off dirt from walls.

- Brush off snow from roof regularily.

- Routinely remove needles and leaves from cedar roof.

Painting/Staining

- Your cedar shed, if left untreated, will weather to a silvery grey colour.

- Painting or staining your structure is highly recommended and will prolong the life of your shed.

- You do not need to wait to paint or stain your shed, the wood in your kit has been dried and can

be stained or painted immediately.

- Consult your local paint store for the best paint or stain for cedar.

- Optional: stain the inside of your shed. (Note: this will remove the fresh cedar smell.)

1. 2. 3.

4. 5. 6.

Sill Gasket

Floor Joists

Foundation

Floor Plywood

Wall Panel

Dab of caulking

Strip of roofing paper over

apex of roof panels

Floor Runner

Small gap

between bevel

siding and

window trim

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 7

1. Locate Floor Joist and position at center of Floor Section

and flush with framing as illustrated above. Attach with 2 - 2 1/2”

Brown Screws per end. Flip over and lay Floor Section on a

level foundation only. Patio Stones or a Concrete Slab both

make excellent foundations. (See Page 3 for more information

on foundations). Use a level to confirm and shim Floor Joist as

required.

A. Floor Section

Parts

Floor Joist

(1 1/2” x 2 1/2” x 70”) x 1

Floor Section

(35” x 73”) x 1

Hardware

2 1/2” Brown Screws

x 4 total

Exploded view of all parts necessary to complete the Wall Section. Identify all parts prior to

starting.

Floor Joist

Floor Section

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 8

Due to packaging constraints, top wall plates must be attached prior to erecting walls.

2. For each Rear and Side Wall Panel, carefully lay panel face down. Position and attach a Top Wall

Plate to top of wall studs of each Wall Panel with 2 - 2 1/2” Brown Screws. Position so Plates are

flush with framing.

Parts

Rear/Side Wall Panels

(35” x 63 1/4”) x 4

Top Wall Plates

(1 1/2” x 1 1/2” x 35”) x 4

Hardware

2 1/2” Brown Screws

x 8 total

Top Wall Plate

Important:

Pilot hole ALL 2x2 Wall Studs

with 1/8” drill bit prior to screwing.

This will make it much easier

to attach together.

B. Wall Section

Exploded view of all parts necessary to complete the Wall Section. Identify all parts prior to

starting.

Long Shelf

Supports (2)

Wall

Panels (4)

Side Angle

Gables (2)

Short Shelf

Supports (2)

Storage Shelves (2) Front Narrow Walls (2)

Wall Extenders (2)

Front Top Plate

Top Wall Plates (4)

Front Header

Interior Door

Header

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 9

3. With Wall Plates properly attached, orientate completed Walls around the Floor. Be sure to leave

room to work. Front Narrow Walls will be required in this section.

Front

Rear Wall Panels

Front Narrow

Walls

Left Side Wall Panel

Wall frame flush with outside

of Floor on the side. Wall

siding will overhang Floor.

Left Side Wall

4. Starting with Left Side Wall, lift up and position so framing is flush

with Floor at both front and rear of shed. Make sure Wall frame is flush

with outside of Floor on the side. When Wall is positioned correctly,

secure Bottom Wall Plate to Floor with 4 - 2 1/2” Brown Screws.

Rear

Bottom Wall Plate

Before completely

attaching walls to floor

(Steps 6-10), check to

make sure door opening is

45” wide. See Step 15

for illustration.

Hardware (Steps 4 - 8)

2 1/2” Brown Screws

x 25 total

4 - 2 1/2” Brown Screws

Wall frame flush

with outside of

Floor at the front.

Wall frame flush with

outside of Floor at

the rear.

Side Wall Panel

Floor

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 10

Rear Corner

Rear Wall

5. With your helper holding the Side Wall Panel, position a Rear Wall Panel in rear corner.

Important: Align Wall Framing Flush with Floor Framing.

Left Side Wall

Rear Wall Panel

Wall frame flush

with outside Floor.

Wall siding will

overhang Floor.

6. When Side and Rear Walls are aligned in corner correctly, Wall framings will be flush. Attach

Wall framings together with 3 - 2 1/2” Brown Screws. Secure Bottom Wall Plate to Floor with

4 - 2 1/2” Brown Screws.

Left Side Wall

2 1/2” Brown

Screws

2 1/2” Brown Screws

Otros manuales de Almacenamiento al aire libre de OLT

OLT

OLT SpaceSaver SS84D-FJ-METAL Manual de usuario

OLT

OLT 8x12 SpaceMaker Shed Manual de usuario

OLT

OLT GS124-SLIDER-CEDAR-FJ Manual de usuario

OLT

OLT SM64-TG-D-METAL Manual de usuario

OLT

OLT 12x4 SpaceSaver Shed Manual de usuario

OLT

OLT STU128-FJ-Ply Manual de usuario

OLT

OLT GS84-S-Plywood Manual de usuario

OLT

OLT GS124-SLIDER-METAL-AK Manual de usuario

OLT

OLT GS84-S-FJ-Plywood Manual de usuario

OLT

OLT GardenSaver GS124-SLIDER-PLY-AK Manual de usuario

OLT

OLT SpaceMaker Manual de usuario

OLT

OLT GS84-S-FJ-Metal Manual de usuario

OLT

OLT Garden Chalet Manual de usuario

OLT

OLT GS63-TG-CEDAR Manual de usuario

OLT

OLT STU128-FJ-Cedar Manual de usuario

OLT

OLT GS84D-FJ-Plywood Manual de usuario

OLT

OLT SS84-SLIDER-CEDAR-AK Manual de usuario

OLT

OLT STU128 Manual de usuario

OLT

OLT Maximizer Manual de usuario

OLT

OLT 8x12 SpaceMaker Manual de usuario

OLT

OLT 6x4 SPACE MASTER Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

OLT

OLT GardenSaver GS84-S-FJ Manual de usuario

OLT

OLT SM812-FJ-Ply Manual de usuario

Manuales populares de Almacenamiento al aire libre de otras marcas

USP

USP DURAMAX 10 Ft x 8 Ft StoreMax Plus Manual de usuario

TYGO

TYGO Nyland Manual de usuario

Duratuf

Duratuf GL105 Manual de usuario

Viking

Viking SD5300SS Manual técnico

USP

USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Manual de usuario

ModuLaro

ModuLaro Lojo WC202200 Manual de usuario

Lifetime

Lifetime 6418 Manual de usuario

rollaway container

rollaway container ARPCA24 Manual de usuario

Duratuf

Duratuf Havelock Manual de usuario

X-METAL

X-METAL 4065 Manual de usuario

Outdoor Life Products

Outdoor Life Products FP2030 F Manual de usuario

Royalcraft

Royalcraft Faro 295L Storage Box Manual de usuario

Riverlea

Riverlea Duratuf KIWI KS3 Manual de usuario

Rubbermaid

Rubbermaid 5L45 Manual de usuario

garofalo

garofalo TUSCANY EVO Manual de usuario

Duratuf

Duratuf Kiwi MK1 Manual de usuario

Eden

Eden CA2988 Manual de usuario

Palram

Palram CANOPIA RUBICON 6x10 Guía del administrador