OLT GS84-S Manual de usuario

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 1

8x4 GardenSaver Garden Shed

Single Door

Assembly Manual

Revision #1.2

July 14, 2021

Thank you for purchasing

an 8x4 GardenSaver -

Single Door Shed. Please

take the time to identify all

the parts prior

to assembly.

Please be aware that it is the

customers’ sole responsibility

to acquire the necessary

building permits and or obtain

approval from their local

county, municipality or HOA

prior to purchasing. Generally,

shed structures under 100

square feet do not require

permits in most jurisdictions

in the United States and

Canada.

Optional door

configuration

In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 with-

in 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge,

within 10 business days of this notification. Replacement parts will not be provided free of charge after the 30 day

grace period.

All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manufacturing

and workmanship. Costs incurred for customer installations are not included.

Failure to use supplied parts included in this kit could result in poor product performance and may void your warranty.

Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our written instructions.

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it

is advisable to sweep snow off roof frequently.

- If the product is elevated, any structural and building code requirements are solely

the customer's responsibility, and should be abided by.

- In areas with high or gusty wind conditions, it is advisable to install the structure

securely to the ground.

- Have a regular maintenance plan to ensure screws, doors, windows and parts are

tightly affixed.

Customer agrees to hold Outdoor Living Today and any Authorized

Dealers free of any liability for improper installation, maintenance and

repair.

Stock Code

GS84-S

What to do before my Shed arrives?

Become familiar with this assembly manual and determine if you can•

complete the project yourself or will require a professional contractor.

Clear the construcon area and ensure a clear pathway for delivery when•

the freight company arrives. Remove all debris: roots, grass, rocks, etc.

Excavate the site. Contact your local ulies company to ensure there are•

no gas or electric lines buried in the area before digging.

Decide on the type of foundaon you will be using:•

 Concrete slab, or

 46 inches of crushed gravel with paver stones or 4x4 stringers.

You can ﬁnd the footprint for your shed on Page 3 of your Assembly Manual.

If doing the assembly yourself, have all the necessary tools ready to go and in•

working condion. A list of required tools can be found aer the parts list.

One helper is recommended to assist in construcng your shed.•

It generally takes two people two days to assemble a shed. If you’re hiring

a contractor, their rate should be in line with that duraon of work.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 2

Foundation Types for 8x4 Garden Shed

Concrete Slab Foundation:

- Slab must be at least the same size as assembled floor frame (45 1/2” x 96”) or larger.

- 6” Deep foundation.

- 0.6 Cubic Yards of concrete required.

- A concrete slab will have the longest durability out of your foundation options.

Once level, a concrete slab is the easiest surface to build on.

Gravel with 4x4 Pressure Treated Stringers:

- Excavate at least 6” deep, and 6” wider than floor frame on each side.

- 1.0 Cubic Yards of gravel required, approximately 9 wheelbarrows.

- 3 - 4x4 Pressure Treated Stringers 8’ long required.

- Evenly spaced, with one at each end of floor frame.

Saves money on materials, easy to level and work with.

Gravel with Patio Paver Stones:

- Excavate at least 6” deep, and 6” wider than floor frame on each side.

- 1.0 Cubic Yards of gravel required, approximately 9 wheelbarrows.

- 15 patio pavers (8” x 8” or larger).

- Center patio paver stones underneath floor runners and underneath seams in floor joists.

Patio paver stones are widely available from most landscape stores.

45 1/2”

96”

45 1/2”

96”

6” Deep

67 1/2”

108”

3 - 4”x4”x96”

15 Patio Stones

Floor FrameConcrete Foundation Completed Foundation

17 1/2”

Gravel Foundation Gravel Foundation with treated stringers Completed Foundation

Gravel Foundation Gravel Foundation with Patio Pavers Completed Foundation

67 1/2”

108”

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 3

Thank you for purchasing our 8x4 GardenSaver -Single Door Shed.

Please take the time to identify all the parts prior to assembly.

Parts List:

A. Floor Section

1 - 45 ½” x 75” - Large Floor Frame (2 Joists unattached)

1 - 45 ½” x 21” - Small Floor Frame (2 Joists ATTACHED)

2 - 1 ½” x 3 ½” x 72” - Floor Joists

(Steps 1 - 3)

5 - 1 ½” x 3 ½” x 45 ½” - Floor Runners

(Steps 4 - 6)

1 - 5/8” x 45 ½” x 75” - Plywood Flooring

1 - 5/8” x 45 ½” x 21” - Plywood Flooring

(Steps 7 - 8)

B. Wall Section

4 - 1 ½” x 2 ½” x 45 ½” - Wall Plates

4 - 45 ½” x 75” - Solid Wall Panels

1 - 45 ½” x 75” - Window Wall Panel

1 - 12” x 73” - Narrow Wall Panels

(Steps 9 - 18)

1 - 2” x 3 ½” x 45 ½” - Door Header - (Dado top edge)

2 - ¾” x 3 ½” x 73” - Door Jambs - Vertical

(Steps 19 - 21)

2 - Top Triangular Siding Pc for Angle Wall Extendors (L/R)

2 - 45 ¼” - Angle Wall Extendors (L/R)

2 - 9” x 45 ½” - Wall Extendors

(Steps 22 - 28)

1 - ¾” x 3 ½” x 70” - Horizontal Wall Cleat

1 - ¾” x 3 ½” x 21” - Horizontal Wall Cleat

(Step 29)

C. Rafter & Roof Section

6 - 1 ½” x 2 ½” x 54” - Rafters

2 - ½” x 3 ½” x 48” - Front Soffits

2 - ½” x 3 ½” x 48” - Rear Soffits

(Steps 31 - 36)

2 - Rafter/Facia Nailing Strips - ¾” x ¾” x 51”

(Step 37)

2 - Roof Panels - 51” w x 56” d (1 - Left 1- Right)

(Steps 38 - 40)

4 - 5 ½” Wide x 16” to 18” long - Filler Shingles

(Steps 41 - 44)

D. Miscellaneous Section

(Skirting, Trim, Door, Facia & Misc. Parts)

6 - ¾” x 4 ½” x 45 ¼” - Bottom Skirting (Bevel Siding)

(Steps 47 - 50)

8 - 7/8” x 2 ½” x 36” - Corner Filler Trims

2 - 7/8” x 2 ½” x 10” - Front Center Corner Filler Trims

(Steps 51 - 53)

2 - ½” x 5 ½” x 79” - Rear Corner Trims

2 - ½” x 5 ½” x 88 ¾” - Front Corner Trims

2 - ½” x 2 ½” x 80” - Side Rear Corner Trims

2 - ½” x 2 ½” x 88 ¾” - Side Front Corner Trims

1 - ½” x 2 ½” x 79” - Rear Middle Trim

(Steps 54 - 57)

2 - ½” x 3 ½” x 77 ½” - Vertical Door Trims

1 - ½” x 2 ½” x 46 ¾” - Horizontal Door Trim

1 - ½” x 3 ½” x 8 ¾” - Front Middle Trim

(Steps 58 - 60)

1 - 31 ½” x 72” - Full Door

(Steps 61 - 63)

2 - ½” x 4” x 54 1/8” - Side Facia (Angle Cut Ends) - reverse

4 - ½” x 4” x 50 ½” - Front and Rear Facia

(Steps 64 - 66)

2 - ½” x 4 ½” x 51 5/8” - Roof Ridge Boards

(Step 67)

2 - Detail Facia Plates (4” high)

(Step 68)

1 - ½” x ½” x 32” - Upper Horizontal Door Stop

4 - ½” x ½” x 36 ¼” - Vertical Door Stops

(Steps 69 - 70)

1 Aluminum Window Insert

(Steps 71 - 72)

Window Trim Pkg

1 - 24 1/16” angle cut / 3 - 23” Straight Cut - Window Trim Kit

(Step 73)

1 Flower Box Kit

(Step 74)

1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall

panel siding is damaged or to shim floor or door.

Optional Pieces - When Door configured on end.

1- 1 ½” x 3 ½” x 73” - Optional Door Jamb

1 - ½” x 2 ½” x 42 ½” - Optional Horizontal Door Trim

1 - ½” x 2 ½” x 88 ¾” - Optional Front Middle Trim

(Optional - Steps 77 - 80)

Note: All Trim, Facia and Bottom Skirting pieces

will be positioned rough face out when installed.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 4

8x4 GARDENSAVER-Single Door HARDWARE PACKAGE

Tee Hinge x 3 Door Handle x 1

Square Drive Bit

Hardware Kit (Provided)

Safety Glasses Work Gloves

Safety Equipment Required (Not Provided)

Ladder

Screw Gun/Drill Tape Measure

Hammer Wood Clamp

Level Pliers

Tools Required (Not Provided)

1/8” Drill Bit

Barrel Bolt

Utility Knife

2 1/2”

1 1/4”

3/4”

90° Metal

Bracket x 8

2”

1 1/2” Finishing Nail

Caulking

x 150

x 145

x 22

x 12

x 240

x 1

Black Headed

4” x 6

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 5

Regular Maintenance & Tips to prolong the life of your shed.

Before/During Assembly:

1.) Paint each face and edge of your plywood floor with a latex exterior paint.

2.) Caulk wall seams if gaps appear.

3.) Caulk around window framing.

4.) Caulk perimeter between floor plywood and bottom wall plate.

5.) Caulk channels in lap siding at the top of your door above the trim, just a drop in each channel.

6.) Caulk edge of door threshold.

7.) Optional: Install a Sill Gasket between floor runners and foundation.

8.) Optional: Install an 8” strip of roofing paper below Cedar Ridge Caps for Cedar Roof Sheds.

1. 2. 3.

4. 5. 6.

Sill Gasket

Floor Joists

Floor Runner

Foundation

Floor Plywood

Wall Panel

Small gap between

bevel siding and

window trim

Dab of caulking

Strip of roofing paper over

apex of roof panels

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 6

Routine Maintenance:

- Routinely check all fasteners are tight (ex. Door Hinges, Nails)

- Brush off dirt from walls.

- Brush off snow from roof regularly.

- Routinely remove needles and leaves from roof.

Painting/Staining

- Your cedar shed, if left untreated, will weather to a silvery grey colour.

- Painting or staining your structure is highly recommended and will prolong the life of your shed.

- You do not need to wait to paint or stain your shed, the wood in your kit has been dried and can be

—stained or painted immediately.

- Consult your local paint store for the best paint or stain for cedar.

- Optional: stain the inside of your shed. (Note: this will remove the fresh cedar smell.)

Plywood Floor

Large Floor

Joist Frame

Floor Joists (2)

Floor Runners (5)

Small Floor

Joist Frame

Exploded Floor Section

A. Floor Section Exploded view of all parts necessary to

complete Floor Section. Identify all parts

prior to starting. Note: Floor Footprint is

96” wide x 45 1/2” deep.

Foundation Material

not included.

1. Lay out Large Floor Joist Frame and 2 Floor Joists (1 1/2” x 3 1/2” x 71 7/8”) as illustrated

above. Position Joists equally in Floor Joist Frame. Use Small Floor Joist Frame as a template to

determine joist position. Position Joist so flush with framing.

2. When correctly positioned, attach each Joist with 4 - 2 1/2” Screws (2 per end). You can find

the Square Drive Bit for the screws in with the Hardware Kit Bag.

Flush

with

framing.

Front of GardenSaver

Door Location. Small Floor

Joist Frame.

You can find the

Square Drive Bit, for

the screws, in the

Hardware Kit Bag.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 7

3. With Floor Joist Frames positioned

together flush, attach with 6 - 2 1/2” Screws.

4. Position and attach Floor Runners

(1 1/2” x 3 1/2” x 45 1/2”) to completed floor

frames with 6 - 2 1/2” Screws per Runner.

Make sure Runners are flush with outside

of floor framing but not overhanging. Make

sure 4th Runner is placed equally over seam

where floor frames meet.

4th Runner

96”

45 1/2”

5. With Floor Runners attached, carefully flip the floor over and place on your foundation.

Caution - you may need 2 people to assist you. Be careful when laying floor down not to bend or twist

floor. Note: The floor will be flipped over and floor runners will sit on your foundation. It is important

to note that having a level foundation is critical. Choosing a foundation will vary between regions.

Typical foundations can be concrete pads or patio stones positioned underneath the floor runners.

6. When in place, level floor completely

before proceeding. 7. Position Plywood Floor pieces (2) on top of

completed floor joists.

Flush with Floor Framing.

Front

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 8

8. Position Plywood so it sits almost flush with outside of floor joist framing (see Note). When correctly

positioned, attach to all floor joists with approximately 24 - 1 1/4” Screws. Use screws every 16”.

B. Wall Section Exploded view of all parts necessary to

complete the Wall Section. Identify all parts

prior to starting.

Wall Plate

9. Locate 4 Solid Wall Panels and 4 Wall Plates (1 1/2” x 2 1/2” x 45 1/2”). Attach Plates to

bottom of studs of each wall panel with 3 - 2 1/2” Screws. Position so plates are flush with framing.

Note: Plywood is cut slightly smaller than

floor framing. Keep plywood seams tight.

Important:

Pilot hole ALL 2x3 Wall

Studs with 1/8” drill bit prior to

screwing. This will make it much

easier to attached together.

Angled Wall

Extendors (2)

Door

Header

Solid Wall

Panels (4)

Wall Plates (4) Window Wall Panel

Door Jambs (2)

Narrow Wall Panel

Horizontal Wall Cleats Wall

Extendors (2)

Top Triangular

Siding Pcs (2) (L/R)

See Page 31 for

Optional End Door

Configuration.

Pilot Hole

first.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 9

10. Starting on side, position a Solid Wall Panel on top of plywood floor.

The Wall Panel bottom framing will sit flush with floor framing. Wall siding will

overhang the floor. Important: Make sure all walls are aligned in their

upright position. If not, water may leak into your shed. Unsure if panel is

facing up or down? Recently attached Bottom Plate is on bottom of panel.

11. Outside 2x3 framing of wall panel should be flush with outside of floor framing when properly

aligned. Note: Do not align wall siding to floor. Align wall plate to outside of plywood floor. When

positioned correctly, locate 2nd Solid Wall Panel and place in corner.

Wall Plate Flush

with floor framing.

Do not align

wall siding to

floor. Align

wall plate to

outside of

plywood floor.

12. Butt both vertical wall studs of side and rear walls together and attach with 3 - 2 1/2” Screws.

Screw at the bottom, middle and top of stud to secure properly. Have helper push wall framing

together while securing to ensure tight fit. Note: Drill pilot holes in studs to prevent splitting.

Rear Solid Wall

Side Solid Wall

Do Not Attach Walls To

Floor until Step 30.

Optional - Caulking

seams will help prevent

moisture from entering

your shed. Caulking not

included in kit.

Pilot Hole

first.

Wall Plate

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 10

Tabla de contenidos

Otros manuales de Casa de jardín de OLT

OLT

OLT GardenSaver GS124-SLIDER-METAL-FJ Manual de usuario

OLT

OLT CB128-SLIDER-METAL-BEV Manual de usuario

OLT

OLT 6x6 Apex Manual de usuario

OLT

OLT 8x4 GardenSaver Manual de usuario

OLT

OLT STU128 Manual de usuario

OLT

OLT GS63-TG-METAL Manual de usuario

OLT

OLT FJ Bevel Manual de usuario

OLT

OLT SunShed SSGS1216-FJ-Metal Manual de usuario

OLT

OLT 8x4 SpaceSaver Garden Shed Bevel Model with Plywood... Manual de usuario

OLT

OLT SSGS1212 Manual de usuario

OLT

OLT 12x12 SpaceMaker Garden Shed Manual de usuario

OLT

OLT 9x6 Cabana Manual de usuario

OLT

OLT CB96-AK-METAL Manual de usuario

OLT

OLT 12x16 Sunshed Garden Manual de usuario

OLT

OLT SunShed Garden Shed SSGS1212-FJ-METAL Manual de usuario

OLT

OLT GS124-SLIDER-CEDAR-AK Manual de usuario

OLT

OLT SS84-SLIDER-Ply-AK Manual de usuario

OLT

OLT 8x8 Pine SpaceMaker Manual de usuario

OLT

OLT Cabana Shed CB128-FJ-METAL Manual de usuario

OLT

OLT SS84-SLIDER-METAL-AK Manual de usuario

OLT

OLT GS84-SLIDER-CEDAR-AK Manual de usuario

OLT

OLT 8x12 Santa Rosa Manual de usuario

OLT

OLT 12x8 Cabana Garden Shed Manual de usuario

OLT

OLT Santa Rosa SR812-FJ-Cedar Manual de usuario

Manuales populares de Casa de jardín de otras marcas

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 Manual de usuario

Lemeks

Lemeks Palmako PA120-5930-6 Manual del instalador

Gartenhaus-King

Gartenhaus-King Valery Manual de usuario

Rion

Rion Hobby Gardener Manual de usuario

POD

POD Camping 480 Manual de usuario

Select

Select ISAAC E9682 Manual de usuario

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 Manual de instrucciones

Palmako

Palmako Saale Manual de usuario

Lemeks

Lemeks Palmako Kira EL16-3623 Manual del instalador

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 Manual de instrucciones

Palmako

Palmako Roger FR44-5953-2 Manual de usuario

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 Manual de instrucciones

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Manual de usuario

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Manual de usuario

G21

G21 Boston 882 Manual de usuario

Lemeks

Lemeks Palmako Grace PM56-4529 Manual del instalador

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Manual de instrucciones

Shire

Shire Salcey Manual de usuario