Olivetti ARTJET 20 Manual de usuario
This user guide contains information on
day-to-day use and care of your printer.
You will find further information about the
printer features and functions in the On-Line
Help that is loaded when you install the
driver contained in the Installation CD
supplied with the printer.
Artjet 20
Table of contents
Operating position ........................................... 3
Printeroperatorpanel......................................... 4
Printerstates ............................................ 4
Buttons - basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Buttons - special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Lightindicator............................................ 6
Moreaboutprintheads ........................................ 7
Replacingprintheads ....................................... 7
Print head care and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cleaningtheprintheads......................................10
Moreaboutpaperandspecialprintingmedia ...........................12
Printingmedia............................................17
papersizes...........................................17
papertypes...........................................19
paperweights .........................................20
Driver settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Supplies.................................................22
2User guide
Operating position
1. Place your printer in the position most suited to your work place.
2. Click the corresponding printer position in the Options tab in the Printer Monitor.
•horizontal
l
vertical
The choice of operating position does not affect the printer performance.
User guide 3
Printer operator panel
The printer operator panel has two buttons and a light indicator.
Horizontal operating position Vertical operating position
Printer states
The behaviour of the buttons and light indicator will depend on the printer’s status.
•standby/sleep: no data to be printed;
•printing: from the reception of data until the completion of its printing;
•error: when an error has been detected and the printer is waiting for user intervention;
•service: user-invoked mode for special functions, independent of host.
Buttons - basic functions
Function Button Description
Printer on/off
Power
Toggles the printer ON/ OFF condition.
Paper control
Paper
1) If a sheet of paper is already present in the printer, causes its expulsion.
2) Loads a sheet of paper in the printer ONLY after a “paper error” signal.
Once you have corrected the error condition (paper out, paper jam), press to load
a document and continue your print job.
“Power”“Paper”
“Power”“Paper”
4User guide
Buttons - special functions
Function Buttons Description
Print head carriage
movement
Hold down Power and
press Paper, then release
both buttons together
Toggles the print head carriage loading/rest position.
The light indicator flashes with a simple ON-OFF
sequence.
This operation can also be done from the Printer Monitor.
Print test Hold down Power and
press Paper twice; then
release both buttons
together
The light indicator flashes with a two-flash sequence.
The print test is printed, after which the printer returns to
standby mode.
This operation can also be done from the Printer Monitor.
Clean print heads Hold down Power and
press Paper three times;
then release both buttons
together
The light indicator flashes with a three-flash sequence.
A print head cleaning cycle is executed, after which the
printer returns to standby mode.
This operation can also be done from the Printer Monitor.
Demo page Hold down Power and
press Paper four times;
then release both buttons
together
The light indicator flashes with a four-flash sequence.
The demo page is printed, after which the printer returns
to standby mode.
This operation can also be done from the Printer Monitor.
Hex dump Hold down Power and
press Paper seven times;
then release both buttons
together
The light indicator flashes with a seven-flash sequence.
All data now transmitted to the printer will be printed in
its hexadecimal format.
This feature can be activated ONLY from the operator
panel and should be used only if requested by your
technical support engineer, as it can generate long
print-outs.
Clean paper feed
rollers
Hold down Power and
press Paper nine times;
then release both buttons
together
The light indicator flashes with a nine-flash sequence.
The paper feed rollers will start turning without loading the
paper. To clean the rollers, press lightly on them with a
clean, damp, lint-free cloth.
Toexitfromthisfunction,youmustswitchoffthe
printer.
User guide 5
Light indicator
The status of the light indicator indicates the different printer conditions.
Status Condition
off The printer is not powered.
lit The printer is powered.
flashing slowly The printer is receiving data.
flashing rapidly An operating error has occurred:
Paper out condition.
Solution: Load paper (see “Loading paper ... ”intheInstallation Guide) and press
PAPER.
Paper jam condition.
Solution: Remove the jammed page (see the specific topic in the on-line documentation
loaded when you installed the printer driver).
Print head insertion/replacement operation.
You have moved the print head carriage to the head loading position (using the button
sequence on the operator panel or the ”Change” button in the Printer Monitor).
Solution: Return the print head carriage immediately to its rest position, repeating the
button sequence, or replace the print head (see specific section in More about print
heads).
flashing very rapidly Failure condition.
Switch off the printer and disconnect it from the electrical power supply. Make sure that
the print head carriage and paper feed paths are not obstructed and then reconnect
and switch on the printer.
If the light indicator continues flashing rapidly, disconnect the printer and call the
technical support service or your dealer.
flashing with specific
variable sequence
One of the service functions (see previous table - “Buttons - special functions”).
6User guide
More about print heads
Replacing print heads
You should remove a print head from the printer ONLY to replace it or to repeat its insertion in the case
of faulty printing.
In the description of the operator tasks in this section, the illustrations on the left refer to the
vertical printer position, those on the right, to the horizontal position.
1. With the printer idle (in standby),
(a) open the Printer Care tab in the Printer Monitor and click on the Change button,
or
(b) press and hold the “Power” button on the operator panel and press “Paper” once; release the two
buttons together.
2. Open the top cover: the print head carriage will be in the head loading position.
3. Press the print head release lever to release either:
(a) the black print head, or
User guide 7
(b) the colour print head.
4. Pulling upwards by the thumb and finger grip:
(a) remove the black print head,
(b) remove the colour print head.
5. Insert a new print head of the SAME type (black/colour) and close the printer cover.
6. Click on the appropriate New Head buttoninthePrinter Care tab in the Printer Monitor and then
run the Align function in the same tab.
8User guide
Print head care and precautions
If you have problems inserting the print head:
•Make sure the print head carriage is in the print head loading position.
•Check that the print head/chamber is clean and free of foreign bodies.
•NEVER force the print head into the chamber; always remove it completely and repeat the entire
insertion operation.
If the quality of printing is not optimum, do the “Clean” operation.
•Always keep the print heads sealed in their containers until they are to be used.
•Remember to remove the protective tape before inserting the print head in the printer.
•Take care not to get ink on your clothes; the ink in the print head stains.
•Do NOT attempt to refill the print head with ink, as this damages the print head and the printer.
•DO NOT shake the print head; it is not a fountain pen. If it does not print, do the cleaning operations
described in “Cleaning the print head ”.
Switching off your printer before your computer will guarantee that the print head carriage is in
its rest position. When the printer is powered, the print head carriage will automatically return
to its rest position and go into standby mode after approximately two minutes of inactivity.
User guide 9
Cleaning the print heads
The print heads are cleaned automatically at regular intervals while the printer is powered. This
operation clears the print head nozzles, guaranteeing the ink flow. If you have a problem with the
printing quality that is not solved by this automatic nozzle clearing operation, you can do the same
operation, using the “CLEAN” function in the Printer Care tab in Printer Monitor.
If you have a problem with the printing quality that is not solved by the “CLEAN” feature, run a Print Test
and then proceed as follows:
1. Clean the electrical contacts
(a) Press the “Change” button in the Printer Care tab in the Printer Monitor.
(b) Open the printer cover; release and remove the print head that is causing the problem.
(c) Clean the electrical contacts (gold part) on the print head and in the housing on the print head carriage
with a slightly damp lint-free cloth, taking care not to touch the print head nozzles.
(d) Re-insert the print head in the printer and close the printer cover.
(e) Repeat the print test.
10 User guide
Tabla de contenidos
Otros manuales de Impresora de Olivetti
Olivetti
Olivetti JS-505 Manual de usuario
Olivetti
Olivetti PG L8en Manual de usuario
Olivetti
Olivetti d-Color MF 4003 Manual de usuario
Olivetti
Olivetti MF22 Manual de usuario
Olivetti
Olivetti PG L26 Special Manual de usuario
Olivetti
Olivetti PGL 12EN Manual de usuario
Olivetti
Olivetti d-Color 201MF Manual de usuario
Olivetti
Olivetti d-COLOR P3100 Manual de usuario
Olivetti
Olivetti d-Color MF222 Manual de instrucciones
Olivetti
Olivetti d-COLOR P2226 Manual de usuario
Olivetti
Olivetti PGL 12EN Manual de usuario
Olivetti
Olivetti d-Color MF 3302 Manual de usuario
Olivetti
Olivetti PK-516 Manual de usuario
Olivetti
Olivetti PR2 E Manual de usuario
Olivetti
Olivetti d-Color MF1600 plus Instrucciones de instalación y mantenimiento
Olivetti
Olivetti PGL2535 Manual de usuario
Olivetti
Olivetti PR2 plus Manual de usuario
Olivetti
Olivetti d-COLORP2230 Manual de usuario
Olivetti
Olivetti PR4 DR Manual de usuario
Olivetti
Olivetti PK-512 Manual de usuario
