Oleo-Mac orion 700 Manual
ORION 700
IMANUALE USO E MANUTENZIONE GB OPERATOR’S INSTRUCTION BOOK
Italiano ISTRUZIONI ORIGINALI 5
English TRANSLATION OF ORIGINAL INSTRUCTIONS 43
English
43
Function keys and menu items
Refer to the specied pages for information about calling up the various menu items and for the descriptions of them.
Chapter/page
„Start-up“ see page 58
„Setting the time“ see page 67
„Setting the date“ see page 67
„Setting the language“ see page 68
„Enter PIN code“ see page 59
„Changing the PIN code“ see page 59
„Activate or deactivate the button tones“ see page 68
„Changing the display contrast on the LCD display“ see page 69
„Restoring factory settings“ see page 69
„Setting the week program“ see page 66
Item Name Item Name
1 HOME key 6 START/PAUSE key
2 LCD display 7 Multifunction key right
3 STOP key 8 Multifunction key left
4 Up arrow key 9 ON/OFF key
5 Down arrow key 10 Menu key
44
1 Scope of supply
1.1 Unpacking the machine
Carefully unpack the robot lawnmower and its components and check everything for damage in transport. If there is any
transport damage, immediately notify your dealer.
If the robot lawnmower was sent by a parcel service, retain the original packaging and accompanying documents.
1.2 Scope of supply
Item Name Item Name
1 Robot lawnmower 5 Lawn pegs (100 pcs.)
2 Base station 6 Instructions for use
3 Transformer 7 Quickstart guide
4 Boundary cable (100 m)
1
2
4
3
5
67
English
45
Contents
1 Scope of supply.............................................................................................................................................................. 44
1.1 Unpacking the machine.......................................................................................................................................................................... 44
1.2 Scope of supply......................................................................................................................................................................................... 44
2 About this product......................................................................................................................................................... 48
2.1 Designated use.......................................................................................................................................................................................... 48
2.2 Prohibited use............................................................................................................................................................................................ 48
3 Safety notes ................................................................................................................................................................... 48
3.1 Explanation of symbols...........................................................................................................................................................................48
3.2 General safety notes ................................................................................................................................................................................49
3.3 Safety notes for operation......................................................................................................................................................................49
4 Product information ..................................................................................................................................................... 50
4.1 Product description.................................................................................................................................................................................. 50
4.2 Description of function ...........................................................................................................................................................................50
4.3 Control panel.............................................................................................................................................................................................51
4.4 Sensors in the robot lawnmower..........................................................................................................................................................51
4.5 Base station................................................................................................................................................................................................52
4.6 Transformer................................................................................................................................................................................................ 52
4.7 Boundary cable .........................................................................................................................................................................................52
5 Assembly/installation.................................................................................................................................................... 53
5.1 Assembling the base station..................................................................................................................................................................53
5.2 Setting up the base station.................................................................................................................................................................... 53
5.3 Laying the boundary cable ....................................................................................................................................................................54
5.4 Laying options...........................................................................................................................................................................................55
5.5 Laying the cable around obstacles....................................................................................................................................................... 56
5.6 Connecting the boundary cable to the base station.......................................................................................................................56
5.7 Connecting the low-voltage cables to the transformer.................................................................................................................. 56
5.8 Opening the cover on the rear of the base station ..........................................................................................................................57
5.9 Checking the connection........................................................................................................................................................................57
46
6 Start-up.......................................................................................................................................................................... 58
6.1 Preparations...............................................................................................................................................................................................58
6.2 Switching on/status display...................................................................................................................................................................58
6.3 Language selection..................................................................................................................................................................................58
6.4 Enter PIN code...........................................................................................................................................................................................59
6.5 Changing the PIN code............................................................................................................................................................................59
6.6 Setting/changing the date.....................................................................................................................................................................59
6.7 Setting/changing the time.....................................................................................................................................................................60
6.8 Calibration.................................................................................................................................................................................................. 60
6.9 Starting the robot lawnmower..............................................................................................................................................................61
7 Mowing .......................................................................................................................................................................... 62
7.1 Mowing tips ............................................................................................................................................................................................... 62
7.2 Setting the cutting height...................................................................................................................................................................... 62
7.3 Charging the battery in the robot lawnmower................................................................................................................................. 62
7.4 Exhaustively discharged battery........................................................................................................................................................... 63
8 Programming................................................................................................................................................................. 64
8.1 Starting the robot lawnmower..............................................................................................................................................................64
8.2 Overview..................................................................................................................................................................................................... 65
9 Program menu............................................................................................................................................................... 66
9.1 Setting the week program......................................................................................................................................................................66
10 Setting menu ................................................................................................................................................................. 67
10.1 Setting the time........................................................................................................................................................................................ 67
10.2 Setting the date ........................................................................................................................................................................................67
10.3 Setting the language...............................................................................................................................................................................68
10.4 Further setting possibilities.................................................................................................................................................................... 68
10.5 Activate or deactivate the button tones.............................................................................................................................................68
10.6 Changing the display contrast on the LCD display...........................................................................................................................69
10.7 Restoring factory settings.......................................................................................................................................................................69
English
47
11 Information menu.......................................................................................................................................................... 69
11.1 Hardware information.............................................................................................................................................................................69
11.2 Software information...............................................................................................................................................................................70
12 Program information..................................................................................................................................................... 70
13 Transport ....................................................................................................................................................................... 70
14 Maintenance .................................................................................................................................................................. 71
14.1 Check the rollers can move freely......................................................................................................................................................... 71
14.2 Checking/cleaning contacts ..................................................................................................................................................................71
14.3 Checking/cleaning the base station ....................................................................................................................................................72
14.4 Cleaning the chassis.................................................................................................................................................................................72
15 Repair............................................................................................................................................................................. 72
15.1 Renewing the cutting blade plate........................................................................................................................................................ 72
16 Technical data ................................................................................................................................................................ 73
17 Help in case of malfunctions ......................................................................................................................................... 74
17.1 Examples of fault messages...................................................................................................................................................................74
17.2 Troubleshooting........................................................................................................................................................................................ 75
17.3 Interactive help ......................................................................................................................................................................................... 78
18 Warranty ........................................................................................................................................................................ 78
19 Disposal.......................................................................................................................................................................... 79
20 Declaration of conformity ............................................................................................................................................. 79
48
2 About this product
Comply with the safety and warning instructions in these
instructions for use, and on the robot lawnmower.
These instructions for use are a permanent component
of the described product, and should remain with the
machine if it is sold to someone else.
Only experienced persons who are familiar with the
operation and safe use of this machine should use it. Give
other users the manual with operating instructions, which
they should read before using.
2.1 Designated use
The robot lawnmower is exclusively intended for mowing
private lawns.
Any other use is regarded as not in accordance with the
designated use.
2.2 Prohibited use
1. The robot lawnmower is not suitable for use in commercial
enterprises, public facilities, parks, sports facilities or in
agriculture and forestry.
2. The robot lawnmower must not be used for cutting other
materials, particularly materials above ground level that
require the lawnmower to be raised above the ground.
3. The robot lawnmower must not be used to shred branches,
nor materials thicker than grass.
4. The robot lawnmower must never be used to transport,
push or tow trailers or other similar objects.
5. It is prohibited to t implements or accessories other than
those supplied by the manufacturer.
3 Safety notes
3.1 Explanation of symbols
The following safety notes are used in these instructions for
use.The signal word used depends on the particular risk.
Warning!
Warningaboutapotentialdangerthat
could lead to serious or fatal injuries.
Caution!
A dangerous situation that could lead
to injury.
Important
A dangerous situation that could lead
to damage to the machine.
Note!
Explanatory description that is useful for understanding the
work or the operating procedure to be carried out.
12
456
789
0
쐉
씈
씉
쐈
쐅
1 - WARNING! - Do not let anybody approach to the
working area. Be careful of thrown objects
2 - Read operator’s instruction book before operating
this machine.
3 - Be careful of the cutter blades when adjusting or
servicing the machine.
4 - Be careful of the cutter blades when operating the
machine.
5 - DO NOT stand on the robotic lawn mower.
6 - Type of machine: ROBOT LAWNMOWER
7 - Machine brand and model
8 - Serial number
9 - Specifications
10 - Year of manufacture
11 - CE conformity marking
12 - Class 3 appliance.
13 - Protection class of the machine.
14 - Weight of the machine.
Tabla de contenidos
Otros manuales de Cortacésped de Oleo-Mac
Oleo-Mac
Oleo-Mac OM 106-124 Manual
Oleo-Mac
Oleo-Mac 84 Manual de usuario
Oleo-Mac
Oleo-Mac MR 55 TBD Manual de usuario
Oleo-Mac
Oleo-Mac MAX 48 Manual
Oleo-Mac
Oleo-Mac APACHE 92 EVO Manual de usuario
Oleo-Mac
Oleo-Mac OM 106 Manual
Oleo-Mac
Oleo-Mac OM 105J Manual
Oleo-Mac
Oleo-Mac APACHE 92 Manual
Oleo-Mac
Oleo-Mac G 44 PE Manual
Oleo-Mac
Oleo-Mac 102-122 Manual de usuario
Manuales populares de Cortacésped de otras marcas
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manual de usuario
DEWEZE
DEWEZE ATM-725 Manual de operación
Weed Eater
Weed Eater 180083 Manual de usuario
Husqvarna
Husqvarna Poulan Pro PP185A42 Manual de usuario
Better Outdoor Products
Better Outdoor Products Quick Series Manual de usuario
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manual de funcionamiento
