Oldham OLC 100 Manual de usuario
(P/N : NPO100GB rev C)
2OLC(T)100
Technical manual
Copyright 2011 by Industrial Scientific – Oldham S.A.S
First edition, French version
All rights reserved. No reproduction of all or part of this document, in any
form, is permitted without the written consent of Industrial Scientific –
Oldham S.A.S.
All of the information that is provided in this document is accurate to the best
of our knowledge.
As a result of continuous research and development, the specifications of
this product may be changed without prior notice.
Industrial Scientific Oldham S.A.S
Rue Orfila
Z.I. Est – BP 20417
F–62027 ARRAS Cedex
Tel.: +33 (0)3 21 60 80 80
Fax: +33 (0) 3 21 60 80 00
Content 3
Contents
Chapter 1 | Presentation ........................................................7
Purpose......................................................................................................7
Operating principle.....................................................................................7
Composition of the detector.......................................................................8
Internal elements........................................................................................9
Identifiers..................................................................................................10
Chapter 2 | Ranges...............................................................11
OLC100 and OLCT100 ranges................................................................11
OLCT100 range (Transmitter type)..........................................................12
Chapter 3 | Installation.........................................................13
Necessary equipment ..............................................................................13
Regulations and conditions of use...........................................................13
Electrical power supply ............................................................................14
Transfer curve..........................................................................................14
Location of the detector............................................................................15
Detector positioning .................................................................................15
Connector cable.......................................................................................16
Cable connection .....................................................................................17
Scope of use............................................................................................21
Chapter 4 | Calibration.........................................................22
Necessary equipment ..............................................................................22
Commissioning.........................................................................................22
Stabilization time......................................................................................23
Opening the cover....................................................................................23
Calibrating the OLC100............................................................................24
Calibrating the OLCT100 .........................................................................26
Chapter 5 | Preventive maintenance ...................................31
Frequency of maintenance ......................................................................31
Actions......................................................................................................32
4OLC(T)100
Technical manual
Chapter 6 | Maintenance.......................................................33
Checking the current generator................................................................34
Possible errors .........................................................................................35
Replacing sensor block............................................................................36
Calibration kit............................................................................................38
Chapter 7 | Accessories.......................................................39
Cable gland..............................................................................................41
Chapter 8 | Spare parts.........................................................42
Chapter 9 | Declaration of EC conformity ...........................44
Chapter 10 | Technical specifications..................................46
Dimensional characteristics .....................................................................47
General Specifications .............................................................................48
Catalytic head (OLCT100 XP)..................................................................49
Toximetric heads (OLCT100 XP and OLCT100 IS).................................51
Semiconductor heads (OLCT100 XP) .....................................................53
Infrared head (OLCT100 XP-IR)..............................................................54
Chapter 11 | Specific instructions for use in explosive
atmospheres and operational safety........................................55
General comments...................................................................................55
Metrological performance for the detection of flammable gases.............56
Threaded joints.........................................................................................56
Operational safety....................................................................................56
Reliability data..........................................................................................57
Detector in intrinsically safe "ia" protective mode: Special use conditions..
.......................................................................................................57
Annexe | Ordering information..........................................59
Gas List....................................................................................................59
Limites de responsabilité 5
Thank you for choosing this OLDHAM instrument.
All of the necessary actions have been taken in order to ensure your complete
satisfaction with this equipment.
It is important that you read this entire manual carefully and thoroughly.
The extent of our responsibility
❧INDUSTRIAL SCIENTIFIC OLDHAM shall not be held responsible for any
damage to the equipment or for any physical injury or death resulting in whole
or in part from the inappropriate use, installation, or storage of the equipment,
which is the result of not complying with the instructions and warnings, and/or
with the standards and regulations in force.
❧INDUSTRIAL SCIENTIFIC OLDHAM does not support or authorise any
business, person, or legal entity in assuming responsibility on behalf of
INDUSTRIAL SCIENTIFIC OLDHAM, even though they may be involved in the
sale of INDUSTRIAL SCIENTIFIC OLDHAM products.
❧INDUSTRIAL SCIENTIFIC OLDHAM shall not be responsible for any damage,
direct or indirect, or for damages and interest, direct or indirect, resulting from
the sale and use of any of its products UNLESS SUCH PRODUCTS HAVE
BEEN DEFINED AND CHOSEN BY INDUSTRIAL SCIENTIFIC OLDHAM
FOR THE USE THAT THEY ARE INTENDED.
Ownership clauses
❧The drawings, specifications, and information herein contain confidential
information that is the property of INDUSTRIAL SCIENTIFIC OLDHAM.
❧This information shall not, either in whole or in part, by physical, electronic, or
any other means whatsoever, be reproduced, copied, divulged, translated, or
used as the basis for the manufacture or sale of INDUSTRIAL SCIENTIFIC
OLDHAM equipment, or for any other reason without the prior consent of
INDUSTRIAL SCIENTIFIC OLDHAM.
6OLC(T)100
Technical manual
Warning
❧This is not a contractual document. In the best interest of its customers and
with the aim of improving performance, INDUSTRIAL SCIENTIFIC OLDHAM
reserves the right to alter the technical features of its equipment without prior
notice.
❧READ THESE INSTRUCTIONS CAREFULLY BEFORE THE FIRST USAGE:
these instructions should be read by all persons who have or will have
responsibility for the use, maintenance, or repair of the instrument.
❧This instrument shall only be deemed to be in conformance with the published
performance if used, maintained, and repaired in accordance with the
instructions of INDUSTRIAL SCIENTIFIC OLDHAM by INDUSTRIAL
SCIENTIFIC OLDHAM personnel or by personnel authorised by INDUSTRIAL
SCIENTIFIC OLDHAM.
Guarantee
❧Under normal conditions of use and on return to the factory, parts and
workmanship are guaranteed for 3 years, excluding such consumables as
sensors, filters, etc.
Destruction of the equipment
European Union (and EEA) only. This symbol indicates that, in
conformity with directive DEEE (2002/96/CE) and according to local
regulations, this product may not be discarded together with household
waste.
It must be disposed of in a collection area that is set aside for this purpose, for
example at a site that is officially designated for the recycling of electrical and
electronic equipment (EEE) or a point of exchange for authorized products in the
event of the acquisition of a new product of the same type as before.
1 - Presentation 7
Chapter1 |Presentation
Purpose
This range of sensors is designed to detect a particular gas depending on the type
of sensor used.
Operating principle
The measurement sensor converts the target gas into voltage or current. This
electrical parameter is:
❧either conducted directly via a connecting cable to a dedicated central
measurement unit (as with the OLC100 explosimeter) that operates on the
principle of the Wheatstone bridge. Such a measurement unit is available in
the OLDHAM range.
❧or amplified, corrected for temperature, linearised, and converted to a 4-20 mA
signal (as for the OLCT100) and conducted via a connecting cable to a
centralized unit (measurement unit or industrial automation system).
8OLC(T)100
Technical manual
Composition of the detector
A detector comprises the following elements:
Id. Description
1. Company label
2. Cover
3. PCB protector (for OLCT version).
4. PCB.
5. Cable gland inlet.
6. Enclosure.
7. Sensor block.
8. Nozzle.
9. Ground connection.
10. LEL sensor (high temperature).
050
Figure 1 : component parts of an OLCT100 detector.
1 - Presentation 9
Internal elements
The following elements are internally accessible to the user:
Id. Description
1. Terminal for the cable being connected to the central unit (measurement unit,
automation).
2. Sensor block connector.
3. Calibration ribbon connector.
4. 4 mA adjustment.
5. Push button access for 4 mA adjustment.
6. Zeroing.
7. Sensitivity adjustment.
OLC100 detector OLCT100 explosimeter OLCT100 detector for toxic
gases
006
Figure 2 : internal view of the detectors.
10 OLC(T)100
Technical manual
Identifiers
The enclosure has two identifier labels, as described below:
Company label
This in turn groups the detector features together:
Id. Description
1. Manufacturer's name
2. Type of product
3. ATEX- IECEx Marking
4. CE symbol and the number of the
organisation that provided the OLDHAM
production quality certification (INERIS)
5. Warning.
6. Type of gas detected and range of
measurement
7. Maximum ATEX certification temperature
(excluding metrological performance)
8. Recycling symbol
008
Figure 3 : Company label.
Side label
This label shows the following :
Id.
Description
1.
Thread diameter and pitch for cable inlet
2.
Detector reference number, less sensor (P/N)
3.
Detector serial number (S/N)
010
Figure 4 : side label.
Otros manuales para OLC 100
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Detector de gas de Oldham
Oldham
Oldham ctx 300 Manual de usuario
Oldham
Oldham CTX 300 CO2 Manual de usuario
Oldham
Oldham MX62 Manual de usuario
Oldham
Oldham OLC 100 Manual de usuario
Oldham
Oldham OLC 100 Manual de usuario
Oldham
Oldham Surveyor 4B Guía de instalación
Oldham
Oldham SV 4B Manual de usuario
Oldham
Oldham CPS Series Manual de usuario
Oldham
Oldham MX62 Manual de usuario
Oldham
Oldham OLC 10 Manual de usuario
Manuales populares de Detector de gas de otras marcas
Macurco
Macurco GD-6 Manual de usuario
Evikon
Evikon E2632 Manual de usuario
Critical Environment Technologies
Critical Environment Technologies CGAS-A Series Manual de usuario
MSA
MSA altair 5 Manual de usuario
DOD Technologies
DOD Technologies ChemLogic CL96 Manual de usuario
DEGA
DEGA NS III LCD Series Manual de usuario
