Okofen Flexilo Manual de usuario
Installation
manual
Pellet Outside Storage
ENGLISH
PE729EN
Title:
Article number:
Installation manual Pellet Outside Storage
PE729EN
Version valid from:
Approved:
03/2023
Christian Wohlinger
Author
ÖkoFEN Forschungs- &
EntwicklungsgesmbH
A-4133 Niederkappel, Gewerbepark 1
Tel.: +43 (0) 72 86 / 74 50
Fax.: +43 (0) 72 86 / 74 50 – 210
E-Mail: oek[email protected]
www.oekofen.com
© by ÖkoFEN Forschungs- und EntwicklungsgesmbH
Subject to modifcations
Contents
1 Dear Customer 4
1.1 Intended use 4
2 Types of safety warning sign 5
3 Planning Pellet Outside Storage 6
3.1 General 6
3.2 Preparatory work 7
4 Preparation surface 9
5 Parts list 10
6 Structure base plate 16
7 Structure fabric tank 17
8 Structure base frame 18
9 Application foil 27
9.1 Do-it-Yourself facade 28
10 Line routing 29
Contents
1 Dear Customer
Proficiency, innovation and quality combined. This is the tradition on which ÖkoFEN
shapes the future. We are very pleased that you too have decided to purchase a
product from ÖkoFEN.
•This manual is intended to help you operate the product safely, properly and eco-
nomically.
•Please read this manual right through and take note of the safety warnings.
•Keep all documentation supplied with this unit in a safe place for future reference.
Please pass on the documentation to the new user if you decide to part with the
unit at a later date.
•Please contact your authorised dealer if you have any questions.
ÖkoFEN attaches great importance to the development of new products. Our R&D
Department repeatedlychallenges the eectiveness of tried-and-tested systems and
works continuously on improvements. In thisway, we secure our technological advant-
age. We have already received many national and internationalawards for our prod-
ucts.
All our products comply with European standards in respect of quality, eciency and
emissions.
1.1 Intended use
The FleXILO storage tank is designed for the storage of pellets for heating systems in
detached and semi-detached houses or commercial buildings. Use of the FleXILO
storage tank for other purposes is not permitted. No reasonably foreseeable forms of
misuse of the FleXILO storage tank are known.
The following Austrian standards, guidelines and specifications have been applied:
Standards Designation
EN ISO 17225-2 Pellets for non-industrial use
4 1 Dear Customer
Installation manual
2 Types of safety warning sign
The warning signs use the following symbols and texts.
Types of safety warning sign
1.Risk of injury
2.Consequences of risk
3.Avoiding risk
DANGER
Danger - indicates a situation that could lead to death or lifethreatening injury.
▶Observe the instructions for eliminating this hazard!
WARNING
Warning - indicates a situation that could lead life-threatening or serious injury.
CAUTION
Caution - indicates a situation that could lead to injury.
NOTICE
▶indicates a situation that could lead to property damage.
2 Types of safety warning sign 5
Installation manual
3 Planning Pellet Outside Storage
3.1 General
Preparations
1.Where and how are the suction lines, power supply for motor (5 x 1,5 mm2) and
grounding (min. 6 mm2) routed into the house.
2.Selection of suitable above- or below-ground cable routing and wall penetration
incl. watertightness must be taken into account.
•he pipes must be installed above ground in a protective pipe of at least Ø
DN160
•or at least ØDN200 must be routed underground.
3.Use only bends with 45° to allow easy retraction of the hoses.
For the Flexilo Outdoor outdoor tank, a paved subsoil and a gravel subsoil with a min-
imum height of 10 cm are required. Additional concrete slabs facilitate the installation
of the tank and additionally improve the stability.
NOTICE
Accumulated water must be avoided at all costs!
If underground installation of the suction hoses is selected, the protective tube must
be at least 5 cm above the inner floor edge of the external tank. The protective tube
should protrude to the left or right in the motor area of the tank. The base plate must
be suciently recessed in this area
NOTICE
Depending on local conditions, the distance from the house wall should be 10-50 cm.
▶Observe the country-specific regulations.
CAUTION
The tank must be protected from the weather during installation!
Complete resistance to weathering exists only when the film is mounted on the tank
completely closed.
▶Only assemble the tank in dry weather conditions.
Required tools
•Horizontal bar 2 m
•Measuring tape
•Pencil
•Jigsaw
•Drill, bit inserts, screws
•Wood drill Ø4 mm
•Hole saws approx. Ø51 mm ±1 mm
and approx. Ø30 mm ±1 mm
6 3 Planning Pellet Outside Storage
Installation manual
3.2 Preparatory work
Secure location choice
•Level surface, free from backwater
•Safety against slipping, accessibility for filling process
•Excavate the soil at least 10 cm, compact and gravel.
•Recommendation:
•Align 7 pieces of concrete slabs (40x40x4 cm) in the scale.
Above-ground or underground laying of the suction hoses
NOTICE
Line length must not exceed 20 m per hose.
Variant 1 underground cable routing
•In the case of underground piping, install a protective pipe with at least ØDN200
and bends with max. 45°.
•Install the wall duct by means of a pipe duct and a lining pipe (to be provided in
the concrete formwork).
•Check with the builder or an expert to determine the appropriate penetration for
a brick wall.
•The pipe should protrude so far from the ground that the end of the pipe is at
least 5 cm above the top of the ground.
NOTICE
Until the tank is fully built up, the pipe end must remain closed.
3 Planning Pellet Outside Storage 7
Installation manual
Variant 2 above ground line routing
•For above-ground piping, install a protective pipe with at least ØDN160 and
bends with max. 45°.
•Install the wall duct by means of a pipe duct and a lining pipe (to be provided in
the concrete formwork).
•Check with the builder or an expert to determine the appropriate penetration for
a brick wall.
•Attach the DN160 wall bracket (accessory) on the outside and lay the protective
pipe with 45° bends up to the outer tank.
•At the tank there is an insertion nozzle on which the hoses as well as the adapter
for the protective tube can be mounted.
Grounding/potential equalization
•Grounding of the filling nozzle:
Observe the country-specific regulations.
8 3 Planning Pellet Outside Storage
Installation manual
4 Preparation surface
There are dierent regulations in the dierent European countries. Please mind the
prescription of your country.
c
min. 300-500
2210
d
2850
ab
e
a)Underground pipe - Ø200
b)Concrete slabs
c)Distance to the house wall
d)House wall
e)Excavation (2850 x 2210 x 100 mm)
940
1466
1644
1644
2280
222
622
Specifications in mm
4 Preparation surface 9
Installation manual
5 Parts list
No. Part Dimensions in mm Quantity Illustration
1 Foot profile 2
2 Middle foot profile 1
3 Rear foot profile 1
4 Front foot profile 1
5 Base plate 27x438x1556 5
10 5 Parts list
Installation manual
Otros manuales para Flexilo
1
Tabla de contenidos
Otros manuales de Almacenamiento de Okofen
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario