Oki C931 DICOM Manual de usuario
Recommendations to Optimize Envelope Feeding on OKI C931/941/C942/DP Color Printers
The following recommendations address paper jams due to envelope feeder timing, and help to reduce
printer pausing. The results optimize throughput when printing Com-10 envelopes with an envelope
feeder attached to the C931, C941 or C942.
1. Update the printer firmware to suite version is A01.35 (or higher). An outline of the update process
and a link to the web-site are included near the end of this document.
2. Ensure the following printer menu settings are set at the operator panel:
a) Menu Print Adjust Narrow Paper Speed = Normal 2; Press OK to set and then press On Line
3. Sleep mode and power save modes can be adjusted to avoid excessive warm-up times in-between
jobs. For example, adjust Power Save to 60 minutes:
Menu Menus System Adjust Power Save Time 60 min; Press OK to set and then press On
Line
4. Recommended Driver Settings to minimize printer adjustment cycles for Com-10 envelopes:
a) Media Weight: “Medium Heavy”
b) Media Type: “Plain” (Selecting “Envelope” as the media type runs that printer at a slower speed)
c) Media Size: “Com-10 Custom” (appears in the latest PostScript driver) or select Custom Size and
enter the dimensions for your envelope.
Select the “Custom” sizes (Com-10 Custom, A7 Custom,…) when using well behaved envelopes to
maximize throughput. Selecting non-Custom sizes will run the printer slightly slower and may be helpful
for some jobs.
Input Jams
The majority of paper jams at the MP Tray when using an envelope feeder are related to timing
differences between the feeder and printer. The latest printer firmware includes a setting to help
synchronize the timing:
Menu Calibration Specific Media Feed Mode
The default value is OFF. If you encounter frequent jams at the MP Tray, selecting 1 or 2 will allow
additional time (milliseconds) for the envelope to be handed off from the feeder to the printer.
Paper Jam Recover Tip
The printer will recover faster from a paper jam if you simply open and close the side access door just
below the MP Tray. Opening a front panel used to access toners and drums triggers the printer to
perform calibration cycles, which take longer.
Firmware Update
Here are the general steps:
1. Download and install the "Windows" version of the firmware update tool from the following link:
http://global.okiprintingsolutions.com/FWInterface.nsf/frmmain?OpenForm&Lang=en&RF=http://globa
l.okiprintingsolutions.com/FWInterface.nsf/frmMain?OpenForm&Lang%3Cen%3E
The utility has a small footprint and runs directly from the EXE file (no install program).
2. Run the utility. On the 4th or 5th screen, you will be requested to "Specify the Update Method."
Select the radio button "The latest version of firmware will be downloaded..." and press "Next" to
continue.
Search the local network or USB connection. If necessary press the button "Environment Settings" to
add the printer's IP address for the Network search range.
The Admin password for the printer is "aaaaaa" (lower case "a" six times)
Otros manuales para C931 DICOM
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Impresora de Oki
Oki
Oki C844 Guía de configuración
Oki
Oki Microline 320 Manual técnico
Oki
Oki C3400n Manual de usuario
Oki
Oki ML3321 Manual de usuario
Oki
Oki Microline 8480 FB Manual de usuario
Oki
Oki C810n Guía de inicio rápido
Oki
Oki C6000dn Manual de usuario
Oki
Oki OKIPAGE 4M Manual
Oki
Oki C310dn Manual de usuario
Oki
Oki C7200 Manual de usuario
Oki
Oki C7200 Manual de usuario
Oki
Oki OKICOLOR 8 Manual de usuario
Oki
Oki B6300dn Manual de usuario
Oki
Oki ML 186 Manual de usuario
Oki
Oki ES2024 Manual de usuario
Oki
Oki C3600n Manual de usuario
Oki
Oki Pacemark PM4410 Manual de capacitación
Oki
Oki C130n Manual de usuario
Oki
Oki ML591 Manual de usuario
Oki
Oki C7100 Manual de usuario
