Oki 9600 HW Manual
Printer Setup
1
Remove cardboard overpack revealing contents.
(1) Printer
(2) Light-shield bags
(3) 15A Power Cord
(4) Toner Cartridges
(5) Ferrite Core for network cable
(6) CDs
(7) Paper holding arm
2
Printer Setup
Remove top packing pieces and open the protective plastic bag.
Printer Setup
3
Select a location where you have sufficient access space.
4
Printer Setup
1. Lift printer and place it on selected location.
2. Remove any shipping tape.
Printer Setup
5
Install the paper holding arm:
1. Lift up the paper holding arm cover.
2. Snap the paper holding arm into place.
3. Snap the tab on the cover into the slot in the paper holding arm.
6
Printer Setup
Lift the top cover.
Printer Setup
7
Remove the orange shipping restraints located at the front and rear of each
image drum.
8
Printer Setup
Remove tape and pull out the protective sheet from each image drum.
Printer Setup
9
Remove the orange plastic shipping clips from both ends of each image drum.
10
Printer Setup
Remove tape and pull out the orange toner well covers from each image drum.
Note: We suggest you retain these covers in the event the printer needs to be
shipped.
Otros manuales de Impresora de Oki
Oki
Oki OKIPOS X400 Manual de usuario
Oki
Oki C332dn Instrucciones de uso
Oki
Oki B410D Manual de usuario
Oki
Oki C3200n Manual de usuario
Oki
Oki OKIMATE 10 Manual de usuario
Oki
Oki ML320 Epson/IBM Manual de usuario
Oki
Oki Microline 590 Manual de usuario
Oki
Oki PRO330S Manual de usuario
Oki
Oki ML390Turbo Manual de usuario
Oki
Oki OKIPOS 426S Manual de usuario
Oki
Oki C5800Ldn Series Manual del propietario
Oki
Oki Okicolor8 Manual de usuario
Oki
Oki B8300n Manual de usuario
Oki
Oki B4100 Actualización de firmware
Oki
Oki C5300 Manual de usuario
Oki
Oki B4400N Manual de capacitación
Oki
Oki C5100 Manual de usuario
Oki
Oki B 6100 Manual de usuario
Oki
Oki C3600n Manual de usuario
Oki
Oki C8800dn Manual de usuario
