Oki C9600 Series Guía de configuración

Contents

Overview. . . . . . . . . . . . . . . . . . . . . . . . 1

Custom Features. . . . . . . . . . . . . . . . . . . . . . . 1

Print Environment . . . . . . . . . . . . . . . . . . . . . 1

AB Media . . . . . . . . . . . . . . . . . . . . . . . 2

Settings to Use for AB Media . . . . . . . . . . . . 2

Media Feed Orientation . . . . . . . . . . . . . . . . . 4

Corel Draw 12 Settings . . . . . . . . . . . . 5

Printer Driver Settings. . . . . . . . . . . . . 6

Paper/Quality Tab . . . . . . . . . . . . . . . . . . . . . 6

Job Options Tab . . . . . . . . . . . . . . . . . . . . . . . 7

Color Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Overview

Custom Features

Three custom media types for printing some special

media have been downloaded to the printer HDD and

can be selected from the printer driver when printing.

Two custom color profiles have been downloaded to the

printer HDD and can be selected from the printer driver

when printing. The Printer Output Profile setting Default

is recommended for all AB media.

Driver default settings for AB:

•Print Quality: Fine / Detail (600x1200)

•Media Check: Off

•Color Mode: Graphics Pro

•CMYK input Profile: SWOP

•Printer Profile: Default

The AB special media names have been added to the

driver's Media Type selection.

Print Environment

NOTE

The term HDD throughout this document stands

for Hard Disk Drive.

Item Anheuser-Busch Comment

Printer OKI®C9600 HDD and Duplexer

are installed.

CustomMedia

Table See page 2 for details. Custom AB media

selections appear

only in the

Windows 2000 and

XP drivers.

Custom Color

Profiles See page 8 for details. Two are provided:

• Default

• Alternate

OS Windows 2000/XP

Application Corel Draw 12

Driver PostScript®Windows 2000/XP

specific version.

Currently,Windows

Logo is not

available.

AB Media

• Media Type: Set the Media Type in the printer driver rather than in the printer menu.

• Paper Tray/Output Bin: Use the suggested paper tray and output bin to prevent paper jams and misfeeding.

• Color Profile: Use the Default setting for the Graphics Pro Color Mode Printer Output Profile (see page 8).

• AB Media Types: Specific AB media types (e.g., AB CARDSTOCK) only appear in the Windows 2000 and XP drivers.

For other Windows operating systems, select the alternate media type shown.

Settings to Use for AB Media

Media Select Media Type

Paper

Tray

Sort Edge

Versus

Long Edge

Output

Bin

Select

Black

Finish Comments

Plain Paper Automatically Selected Any Either Either N.A. The printer automatically optimizes

the print mode settings.

#80 White Opaque

Card Stock:

AB-CS8511-1000

AB-CS8514-1000

AB-CS1117-1000

AB-CS1236 -1000

AB-CS1218-1000

AB CARDSTOCK

Ultra Heavy 2

(51-58 lb)

Tray Long Edge Stacker

(Face-up) Glossy Paper dust can damage the printer

and shorten the life of

consumables.

Periodically check for paper dust

buildup on the MP Tray rollers and

clean the printer as necessary (see

page 9).

10 PT Glossy Paper:

SSD-95LTR

SSD-95 12 x 18

SSD-95LGL

AB GLOSSYPAPER

Ultra Heavy 2

(51-58 lb)

Tray Long Edge Stacker

(Face-up) Glossy

Fold-up Table Tents,

3 up per sheet:

SSD - Tabletents

12 x 19.12"

AB TABLETENTS

Ultra Heavy 2

(51-58 lb)

Tray -Stacker

(Face-up) Glossy Before printing

• Separate each sheet carefully to

avoid multi-sheet feeding.

• Check for paper dust and chaff,

particularly around the cut edge

of the media.

Paper dust can damage the printer

and shorten the life of

consumables. Periodically check

for paper dust buildup on the MP

Tray rollers and clean the printer

as necessary (see page 9).

12 x 12 Triangle die-

cut adhesive:

AB - LFV1212

AB CORNERCLING

Ultra Heavy 2

(51-58 lb)

Tray N.A. Stacker

(Face-up) Glossy

White Low Tack

Laser Vinyl (4 up):

TMS - WCDSL-4

AB WHITECOOLER

Ultra Heavy 1

(35 -50 lb)

Tray -Stacker

(Face-

down)

Glossy

Frosted Low Tack

Laser Vinyl (4up):

TMS - FCDSL-4

AB FROSTEDCOOLER

Ultra Heavy 1

(35 -50 lb)

Tray - Stacker

(Face-

down)

Glossy If this media has severe curl,

reduce the amount of media you

load on the MP Tray to avoid

misfeeding.

Shelf Strip Media -6

1.25" x 11" strips

(Matte):

SSD-SS11x85

AB SHELFSTRIPS MT

User Type 1

(35 -50 lb)

Tray Short Edge Stacker

(Face-up) Matte Separate each paper carefully to

avoid multi-sheet feeding.

Long edge feed causes multiple

sheet feed.

Shelf Strip Media

six 1.25" x 11" strips

(Gloss)

AB SHELFSTRIPS GL

User Type 2

(51-58 lb)

Tray Short Edge Stacker

(Face-up) Glossy Separate each sheet carefully to

avoid multi-sheet feeding.

Long edge feeding causes multiple

sheet feed.

4-up Perf 8.5 x 11",

Matte Wobbler:

AB-WBLRM

AB WOBBLER MATTE

User Type 1

(35 -50 lb)

Tray Short Edge Stacker

(Face-up) Matte Separate each sheet carefully to

avoid multi-sheet feeding.

Long edge feeding causes

multi-sheet feed.

4-up Perf 8.5" x 11",

Gloss Wobbler:

AB-WBLRG

AB WOBBLER GLOSS

User Type 2

(51-58 lb)

Tray Short Edge Stacker

(Face-up) Glossy Separate each sheet carefully to

avoid multi-sheet feeding.

Long edge feeding causes

multi-sheet feed.

Clear Low Tack

Laser Vinyl:

AB-8018

(Stockton Sticker)

AB STOCKTONSTICK

User Type 3

(59-80 lb)

Tray Long Edge Stacker

(Face-up) Glossy Excess glue from the edges of this

media could damage/ shorten the

printer and consumables life.

Clear Cling Film:

SSD- CFARK

SSD- CFARK1218

AB CLEAR CLING

User Type 3

(59-80 lb)

Tray Long Edge Stacker

(Face-up) Glossy Separate each sheet carefully to

avoid multi-sheet feeding.

Excess glue from the edges of this

media could damage/ shorten the

printer and consumables life.

White Cling Film:

SSD- WFARK

SSD-WFARK1218

AB WHITE CLING

User Type 3

(59-80 lb)

Tray Long Edge Stacker

(Face-up) Glossy Separate each sheet carefully to

avoid multi- sheet feeding.

Excess glue from the edges of this

media could damage/ shorten the

printer and consumables life.

Bottle Top:

TMS-BOTTLETOP AB BOTTLEHANGERS

Ultra Heavy 2

(51-58 lb)

Tray - Stacker

(Face-up) Glossy

Table Tent:

TMS-TABINSERT AB TBLTENT INSERTS

Ultra Heavy 2

(51-58 lb)

Tray -Stacker

(Face-up) Glossy Paper dust can damage the printer

and shorten the life of

consumables.

Periodically check for paper dust

buildup on the MP Tray rollers and

clean the printer as necessary (see

page 9).

a. The AB specific media type names only appear in the Windows 2000 and XP drivers. If you are printing from another Windows

operating system, select the alternate media type listed.

b. Long Edge feed is restricted to a maximum of 11"

c. Face Up = side exit tray (straight-through path), Face Down = top exit tray.

Settings to Use for AB Media (continued)

Media Select Media Type

Paper

Tray

Sort Edge

Versus

Long Edge

Output

Bin

Select

Black

Finish Comments

Media Feed Orientation

MP Tray (MPT)

The orientation of letter-size media must match the

media size and orientation in the printer menu.

When media is loaded for long edge feed, if the printer

menu is not set to Letter Long Edge, pages will be

printed rotated 90 degrees.

Trays 1 through 5

Trays 1 through 5 detect the paper size and orientation

automatically.

Example

To change from Letter Short Edge to Letter Long Edge

for the MP Tray in the printer menu:

1. Press the Enter key to switch to the menu mode.

2. Use the ∇key to scroll down to Menus, then press

Enter.

3. With Tray Configuration highlighted, press Enter.

4. Use the ∇key to scroll down to MPTray Config, then

press Enter.

5. With Paper Size highlighted, press Enter.

6. Use the ∇key to scroll down to Letter Long Edge,

then press Enter.

An asterisk appears beside Letter Long Edge.

7. Press ON LINE to save the setting and exit the menu

mode.

Corel Draw 12 Settings

Before printing, click the Tools pull-down menu and

select Color Management. Makesure that the profiles in

red boxes below are selected as shown (default

settings).

When printing a file from Corel Draw 12, make the

following settings in the print dialog box.

General Tab

Make sure that Use PPD is deselected (the default

setting).

PostScript Tab

Make sure that the Screen frequency is set to Default

(the default setting).

Misc Tab

Make sure that the options in red boxes below are set as

shown (the default settings).

Printer Driver Settings

(Windows 2000/XP)

In the Print dialog box, on the General tab:

•Windows 2000: right click the printer icon, then

select Printing Preferences.

•Windows XP: click Preferences.

The Printing Preferences dialog box appears.

Paper/Quality Tab

1. Select the Paper Source: refer to the Media table on

page 2.

2. Click Advanced.

The Advanced Options dialog box appears.

a. Set the Media Type: refer to the Media table on

page 2.

NOTE

The illustrations shown below are from Windows

XP.

NOTE

If the media table recommends the Face-up

Output Bin for the media, this must be selected on

the Job Options tab before the Media Type is

selected.

b. Make sure that Media Check is set to Off (the

default setting). If this option is set to On, the

printer may show Media Type Mismatch on the

LCD display during printing.

c. Set the Tray Switch option to Off.

d. Click OK.

3. Click OK.

Job Options Tab

1. On the Job Options tab, select Fine / Detail (the

default setting) for the Quality.

2. Select the appropriateOutput Bin: refer to the Media

table on page 2.

3. Click OK.

NOTE

Make sure to open the printer's face-up stacker

door when "Stacker (Face-up)" is selected.

Color Tab

1. Select Graphic Pro, then click Details.

The Graphics Pro Details dialog box appears.

Graphics Pro Details Dialog Box

a. Make sure that theInput and Output Profiles inred

boxes below are set as shown.

b. Click OK.

2. Click OK.

NOTE

For general office documents, select Automatic

under Color Mode.

NOTE

The AB custom color simulation is

designed to print Budweiser red as

effectively as possible. If other red tones

are not vivid enough, try setting CMYK

Input Profile to None.

Cleaning the MP Tray

Rollers

Cleaning your printer’s Multi-Purpose (MP) Tray rollers

assures smooth, jam-free operation.

Cleaning the Outer Roller

Check the outer roller (1) frequently for dust build-up,

especially when printing on dust-prone media such as

AB #80 White Opaque Card Stock or Table Tents.

1. Remove the print media from the MP Tray.

The tray support table moves down.

2. Dampen a soft, lint-free cloth with 90% isopropyl

alcohol, then use the cloth to clean the outer roller.

3. Replace the print media in the MP Tray.

Cleaning the Inner Rollers

Periodically, or if you should experience jamming even

though you have cleaned the outer roller, you should

clean the inner rollers as well.

1. Remove the paper from the MP Tray.

The tray support table moves down.

2. Move the paper guides inward slightly.

3. Unlock the hinge latches at each end by pivoting

them up.

4. Lift the MP Tray slightly and pull in on the hinge to

release the pin from the track. Repeat on the other

end.

Otros manuales para C9600 Series

Tabla de contenidos

Otros manuales de Impresora todo en uno de Oki

Oki

Oki CX4545 MFP Manual de usuario

Oki

Oki CX4545 MFP Manual de programación

Oki

Oki MC360 Cómo utilizar

Oki

Oki MC770 series Manual de usuario

Oki

Oki B4545 MFP Manual de usuario

Oki

Oki MB441 Manual de usuario

Oki

Oki ES845MFP Manual de usuario

Oki

Oki B411 Series Manual de usuario

Oki

Oki MC860 MFP Guía de inicio rápido

Oki

Oki C3520 Manual de usuario

Oki

Oki CX 1145 MFP Instrucciones de instalación y mantenimiento

Oki

Oki C9600 Series Manual de usuario

Oki

Oki CX2731MFP Manual de usuario

Oki

Oki ES3032a4 Manual de usuario

Oki

Oki ES9460 MFP Manual de usuario

Oki

Oki MB760 Instrucciones de funcionamiento y mantenimiento

Oki

Oki NeonColor Pro6410 Manual de usuario

Oki

Oki C5550n MFP Guía de inicio rápido

Oki

Oki CX2731 Manual de usuario

Oki

Oki C942 Manual de usuario

Oki

Oki C9800hdn Manual de instrucciones

Oki

Oki MC160MFP Instrucciones de instalación y mantenimiento

Oki

Oki C3530n MFP Manual de usuario

Oki

Oki C5510n MFP Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario