2
Operating Instructions and Parts Manual 24565/24566
2/19
2019 OEMTOOLS™
36" 8 DRAWER TOOL CABINET
28" 7 DRAWER TOOL CABINET
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1.
Know your product. Read this manual carefully. Learn the product’s
applications and limitations, as well as potential hazards specific to it.
2. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS™ for a replacement.
3. Keep work area clean and well lit. Cluttered or dark work areas
invite accidents.
4. Keep children away. All children should be kept away from the
work area. Never let a child handle this product without strict adult
supervision.
5. DO NOT operate this product if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while taking drugs. If there is
any doubt, DO NOT attempt to operate.
6. Use safety equipment. Eye protection should be worn at all times
when operating this product. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
7. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
8. DO NOT overreach. Keep proper footing and balance at all times
when operating this product.
9. Check for damage. Check your product regularly. If part of the
product is damaged, it should be carefully inspected to make sure
that it can perform its intended function correctly. If in doubt, the
part should be repaired. Refer all servicing to a qualified technician.
Consult your dealer for advice.
10. Keep away from flammables. DO NOT attempt to operate this
product near flammable materials or combustibles. Failure to
comply may cause serious injury or death.
11. Store idle product out of the reach of children and untrained persons.
This product may be dangerous in the hands of untrained users.
12. Maintain product with care.
13. Keep product dry and clean.
14. DO NOT use a damaged product. Tag damaged products “DO NOT
USE” until repaired.
15. Check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the product’s
operation.
16. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one product
may become hazardous when used on another product.
17. If damaged, have the product serviced before using. Many
accidents are caused by poorly maintained products.
18. Product service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could create a risk of injury.
19. When servicing a product, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions could create a risk of injury.
20. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the
work area free of obstructions, grease, oil, trash, and other debris.
DO NOT use this product in a damp or wet location.
21. Avoid accidental fire and/or explosion. DO NOT smoke near engine
fuel and battery components.
22. We believe the information contained herein to be reliable.
However, general technical information is given by us without
charge and the user shall employ such information at their own
discretion and risk. We assume no responsibility for results or
damages incurred from the use of such information in whole or in
part. Always refer to specific instructions and technical information
supplied by vehicle manufacturer.
PRODUCT DESCRIPTION
The OEMTOOLS™ Tool Cabinet is designed to provide mobile tool storage.
PRODUCT SPECIFICATIONS
PRODUCT WIDTH DEPTH HEIGHT WEIGHT
24565 36" CABINET
35.8" 18.9" 39.3" 225 Lbs.
24566 28" CABINET 28.3" 15.6" 40.5" 144 Lbs.
DRAWER SIZE WIDTH (IN.) DEPTH (IN.) HEIGHT (IN.) VOLUME
(CU. IN.) # DRAWERS TOTAL VOLUME
(CU. IN.)
CAPACITY
(LBS.)
SMALL DRAWER
29.6 15.7 3.0 1379 8 11028.2 100 Lbs.
LARGE DRAWER 29.6 15.7 6.1 2831 1 2830.6 100 Lbs.
Total Volume 13858.8
24565 36" CABINET DRAWER DIMENSIONS AND CAPACITY
DRAWER SIZE WIDTH (IN.) DEPTH (IN.) HEIGHT (IN.) VOLUME
(CU. IN.) # DRAWERS TOTAL VOLUME
(CU. IN.)
CAPACITY
(LBS.)
SMALL DRAWER
22.4 15.6 3.0 1034 8 8270.9 100 Lbs.
LARGE DRAWER 22.4 15.6 6.1 2123 1 2122.9 100 Lbs.
Total Volume 10393.8
24566 28" CABINET DRAWER DIMENSIONS AND CAPACITY
