Ocilion IPTV Technologies P510 IP Manual de usuario
P510 IP
IPTV set-top box
Instructions for use
Important: Read carefully before use
and retain for future reference.
Table of contents
1 Safety information.................................................................................. 3
1.1 Signs and symbols used.............................................................................. 3
1.2 General safety information.......................................................................... 3
2 Intended use........................................................................................... 5
3 Scope of delivery.................................................................................... 5
4 Connections........................................................................................... 5
5 Getting started....................................................................................... 6
5.1 Inserting the batteries into the remote control........................................ 6
5.2 Cable connections......................................................................................... 7
5.3 Pairing the remote control........................................................................... 7
5.4 Choosing the menu language..................................................................... 8
5.5 Establishing the network connection........................................................ 8
5.6 Software updates........................................................................................... 11
6 Remote control....................................................................................... 11
6.1 Button functions............................................................................................. 12
6.2 Changing the signal type............................................................................. 14
6.3 Programming the TV set.............................................................................. 14
6.4 Controlling the TV.......................................................................................... 17
6.5 Unpairing the remote control (Bluetooth mode)..................................... 18
6.6 Resetting the remote control...................................................................... 18
7 Cleaning................................................................................................. 19
8 Returning used devices.......................................................................... 19
9 Troubleshooting...................................................................................... 20
10 Legal notes............................................................................................. 23
10.1 Registered trademarks and notes on licences........................................ 23
10.2 Open Source Software.................................................................................. 23
11 Declaration of conformity....................................................................... 23
12 Technical specifications......................................................................... 24
2 | P510 IP
1 Safety information
Please read the following information carefully before you start using the product.
This helps prevent misuse and resulting personal injury, faults and/or damage to
the hardware and software.
Save these instructions for use in case of future questions and pass them on to
future users.
1.1 Signs and symbols used
Please make yourself familiar with the signs and symbols used in this instructions
for use.
WARNING
Indicates a potential risk. If not avoided, it can result in serious injury or death.
ATTENTION
Indicates a potentially damaging situation. If not avoided, the component or
an object in its vicinity may be damaged.
Additional information
1.2 General safety information
xThe devices are for indoor use only.
xOnly operate the set-top box with the power supply unit and connecting cables
included in the package contents.
xRegularly check the cable of the power supply unit for damage. In case of
damage, disconnect the power supply unit from the mains network and contact
your provider.
xAlways replace damaged cables with equivalent cables.
xOnly connect the power supply unit of the set-top box to the specified mains
voltage.
xThe set-top box has to be connected to an outlet that is easily accessible. You
must be able to disconnect the set-top box from the mains network at any
time.
xMaintain the following minimum clearances around the set-top box: 10 cm
above, 5 cm behind, 2 cm on the sides.
xNever put the set-top box into a cabinet or shelf with insufficient ventilation.
P510 IP | 3
xDo not let the devices fall on the floor. Do not install the set-top box more than
2metres above the floor.
xDo not try to repair the set-top box yourself. Doing so could put electrical safety
at risk. If the set-top box was dropped or if water got into the unit, disconnect
the set-top box from the mains network immediately and contact your provider.
xProtect the devices against moisture and dripping or splashing water.
xDo not place objects filled with liquids, such as a vase, on top of the set-top
box.
xOnly operate the devices in a dry, dust-free environment.
xProtect the devices and the batteries of the remote control against direct
sunlight, open flames and other heat sources, such as radiators.
xDo not place objects such as other devices or candles on top of the set-top box.
xIn case of an extended absence and during thunder storms, disconnect the
power supply unit of the set-top box from the mains network.
xAlso disconnect all devices connected to the set-top box.
xDo not use hard or sharp objects such as fingernails or knives when operating
the remote control.
xThe batteries included in the package contents are not rechargeable.
xTake the batteries out of the remote control if you will not be using it for an
extended period of time.
xIf the remote control is defective, remove the batteries and contact Customer
Service.
xKeep the devices out of reach of children.
Heating of the set-top box
xThe heating of the set-top box is in the permissible range. However,
sensitive furniture finishes may become discoloured over time due to
ongoing heat exposure.
xThe base can cause discolouration of furniture finishes. Place the set-
top box on a suitable underlay if needed.
4 | P510 IP
2 Intended use
The set-top box is intended to receive TV and radio signals in conjunction with
IPTV systems. The remote control is intended for operating the set-top box and
TV sets. Any other use constitutes improper use. The manufacturer assumes no
liability for errors, faults or damage caused by improper use. This includes the
following in particular:
■Improper connection and operation
■Use of unsuitable data media or accessories
■Failure to comply with the installation and storage conditions
■Infection of software components with computer viruses
■Modification of the hardware and software
3 Scope of delivery
■Set-top box
■Power supply
■High speed HDMI® Cable (1,5 m)
■Network cable (3 m)
■Remote control
■2 x alkaline batteries type AAA
■Instructions for use
4 Connections
Figure 1: Connections
On/off, remote control pairing
(Bluetooth mode) 1)
HDMI® output
USB 2)
LAN
Power
Micro SD card slot 2)
1) Depending on the configuration of the IPTV system, the set-top box and the
operating mode of the remote control.
2) For service use only, or as instructed by your provider. The connection of media
can influence the serviceability of the set-top box.
P510 IP | 5
5 Getting started
WARNING
Danger due to electrical voltage and resulting fire hazard
xThe cables must not be kinked or trapped.
ATTENTION
Risk of malfunctions or defects of the device
Incorrect installation
xConnect the cables to the set-top box in the correct order. Make sure that
the network cable engages audibly.
Interrupting the power supply during installation
xNever disconnect the power to the set-top box box during installation or
when updating the software. This avoids possible damage.
The set-top box box requires an active internet connection to connect
with an IPTV system. Use either a network cable or WiFi to establish the
connection. Please note, however, that if you connect to WiFi and other
devices simultaneously use this internet connection, the bandwidth may
be limited. This can cause issues with playback or interruptions.
5.1 Inserting the batteries into the remote control
1. Insert the batteries into the remote control (see Figure 2 on page 7). To
do so, press down the battery cover at the mark and slide it back , to open
the battery compartment.
2. Place the batteries in the battery compartment , making sure the polarity is
correct (see markings on the bottom of the battery compartment).
3. Insert the lug of the cover into the opening on the battery compartment
and push the battery compartment cover forward until it audibly latches
into place.
6 | P510 IP
Figure 2: Inserting the batteries
5.2 Cable connections
1. Connect the set-top box as shown in Figure 3 on page 7 . Observe the
correct connection sequence:
HDMI® cable
Network cable
Power supply
2. Turn on your TV set.
NETWORK
HDMI
1
3
2
Set-top box
TV set
POWERHDMI
LAN
Figure 3: Cable connections
5.3 Pairing the remote control
When the set-top box is used for the first time, the remote control is automatically
detected.
1. Wait until a remote control symbol is displayed on the TV set.
2. Press the button OK to start the automatic detection.
3. The remote control is now paired with the set-top box. Pairing can take a few
minutes.
P510 IP | 7
5.4 Choosing the menu language
After the remote control is paired with the set-top box, the language selection
options are displayed. Select the language of your choice for the user interface.
1. Select the language you want.
2. Confirm your selection by pressing the OK button.
Figure 4: Language selection
5.5 Establishing the network connection
If you have already established the network connection with a network
cable and want to switch to WiFi, disconnect the network cable and power
supply unit. Reconnect the power supply unit to the set-top box after about
5seconds to open the setup menu.
If you have established the network connection with a network cable, you are
forwarded automatically. To establish the network connection with WiFi, continue
reading in Section "Establishing a WiFi connection" on page 8.
5.5.1 Establishing a WiFi connection
Various methods are available for establishing a WiFi connection:
■Search: The set-top box searches for available WiFi networks.
■Advanced: Use WPS, or enter the SSID manually.
8 | P510 IP
5.5.1.1 WiFi search
1. In the setup menu, select the menu item Connecting to WiFi.
2. Activate the button Search by pressing OK (see Figure 5 on page 9).
3. Select the WiFi network you want to use from the list that is displayed. Make
sure the signal strength is adequate (see Figure 6 on page 9).
4. Use the on-screen keyboard that is displayed to enter the WiFi password and
confirm your input by pressing OK.
5. Wait until the connection is established and then press Quit repeatedly until
the message Successfully established the network connection. is displayed.
Figure 5: WiFi setup
Figure 6: Available WiFi networks
P510 IP | 9
5.5.1.2 Advanced WiFi setup
Not all of the methods described here may be compatible with your router.
You can select from various methods in the advanced WiFi setup.
■WPS button: The connection is established automatically after you press the
WPS button on your router.
■WPS PIN: The connection has to be enabled by entering the PIN on the router
web page.
■SSID: Manually enter the network name.
■Search: Search for available networks (see Section "WiFi search" on page
9).
To establish a WiFi connection using the advanced WiFi setup, proceed as
follows:
1. In the setup menu, activate the button Advanced.
2. Navigate to the setup method of your choice.
3. Then follow the instructions on the TV set.
Figure 7: Advanced WiFi setup
5.5.2 Checking the WiFi status
In the WiFi status: menu, you can access the current data for your WiFi
connection such as the signal strength or the MAC address of your WiFi adapter.
10 | P510 IP
Tabla de contenidos
Otros manuales de Decodificador de Ocilion IPTV Technologies
Ocilion IPTV Technologies
Ocilion IPTV Technologies P580 Hybrid CM Manual de usuario
Ocilion IPTV Technologies
Ocilion IPTV Technologies P550 Switch Manual de usuario
Ocilion IPTV Technologies
Ocilion IPTV Technologies P510E IP Manual de usuario
Ocilion IPTV Technologies
Ocilion IPTV Technologies P520 IP Manual de usuario
Ocilion IPTV Technologies
Ocilion IPTV Technologies P570 Hybrid Manual de usuario
