Oceanic SMC 20 Manual de usuario
MICROCHIP REPLACEMENT
AND RESETING PROCEDURE
STEP 1
unscrew the 2 bolts at the bottom of control module
SALT CHLORINATOR SMC 20 / 30
STEP 2
unplug the control board connecting cable
STEP 3
STEP 4
remove the microchip and replace with new one
please observe the correct position marked on the board
STEP 5
fter assembling the control module you must conduct the RESET procedure.
1) Clean the Electrolytic Cell. (see Manual page 3 )
2) ssure a good water flow trough the cell.
3) Hold the ON / M X button and then plug the unit into the power supply.
Release the button when all green LED lights illuminates. Unit will run for a 30
second in one direction (polarity). fter that it stop for 5 second and start in reverse
polarity. The RESET Procedure is completed. The production level can be adjusted
accordingly to your needs by depressing the button MIN.
Este manual sirve para los siguientes modelos
1
Manuales populares de Filtro de piscina de otras marcas
Davey
Davey EcoPure DEP2140 Manual de usuario
JUWEL Aquarium
JUWEL Aquarium EccoSkim Manual de usuario
POLYGROUP LIMITED
POLYGROUP LIMITED SFS600 Filter System with F600C Pump Manual de usuario
Pentair Pool Products
Pentair Pool Products Filter CFW Series Manual de usuario
Oase
Oase Skimmer 250 Manual de usuario
Oase
Oase CrystalSkim 350 Manual de usuario