Oakton Salt 1 Manual de usuario

Salt 1 Pocket Salinity Tester

Instruction Manual

OAKTON INSTRUMENTS

www.4Oakton.com v1.2

Salt 1 Pocket Salinity Tester Instruction Manual

1. Battery Installation

Please install batteries according to the following steps. Please note polarity:

“+”(anode) is upward; “-” (cathode) is downward

Note: This salinity meter measures practical salinity converted from electrical

conductivity (NaCl Concentration). It does not measure absolute salinity.

2. Keypad Functions

■Short press------- < 2 seconds

■Long press-------- > 2 seconds

1. Short press to turn on, long press to turn off;

2. When turned off, long press to enter setup;

3. In mode setting, short press to change

parameter;

1. When turned on, long press to enter

calibration mode.

2. In calibration mode, short press to confirm

calibration;

3. Calibration

3.1 Rinse the probe in distilled water and dry it. Short press to turn on the

tester.

3.2 Long press to enter calibration mode; Short press to exit.

3.3 Dip the probe into the calibration solution. Stir gently, leave it to stand,

LCD displays , short press to complete 1-point calibration.

The tester returns to measuring mode, and calibration icon appears at the

button left of LCD.

4. Salinity Measurement

4.1 Short press to turn on tester. Rinse probe in distilled water and dry it.

4.2 Stir probe in the sample solution gently, leave it to stand. Get readings after

the smile icon comes up and stays.

5. Notes

5.1 The tester has self-diagnosis functions:

Symbol

Self-Diagnosis information

How to fix

3. In mode setting, short press to confirm

parameter selection.

Diagram - 1

Wrong calibration solution,

which exceeds the

recognizable range of the

meter.

1. Check if calibration solution is

correct

2. Check if probe isdamaged.

is pushed before

measurement is stable

( comes up)

Wait for the smile icon to stay,

and then short press

5.2 The tester has already been calibrated after manufacture. Usually users can

use the tester right away, or test it in the calibration solutions to test its

accuracy. When error is large, calibrate it before using.

6. Parameter Setting

6.1 Parameter setting reference chart:

Symbol

Parameter Setting content

Code

Factory Default

Select salinity unit

ppt –mg/L

ppt

Restore to factory default

No –Yes

6.2 How to setup parameters:

When turned off, long press to enter setup →short press to switch

P1-P2→Short press , parameter flickering→short press to choose,

short press to confirm parameter selection→Long press to switch off.

6.3 Parameter setting notes

a) Select salinity unit(P1):

Optional units: ppt –mg/L, factory default is ppt.

b) Restore to factory default:

Select Yes to restore the calibration to the theoretical values and parameter

setting to original values. When meter’s calibration or measurement performs

abnormally, this function can be adopted so the meter goes back to factory

default setting and then users can conduct calibration or take measurements

again.

7. Technical Specifications

Salinity

Range

0 –10.00 ppt

Resolution

0.01 ppt

Accuracy

±1% F.S

Calibration points

1 point auto calibration

Automatic Temp.

Compensation

0-50˚C

Temp.

Range

0-50˚C

Resolution

0.1˚C

Accuracy

±0.5˚C

8. Other Functions & Parameters

Indication of

calibration points

Auto Power-

off

Power-off in 8

minutes if no

operation

Indication of stable

measurements

Waterproof

level

IP67, floats on water

Self-Diagnosis

information

Er1, Er2

Power Supply

AAA batteries*4

Low battery

reminder

Flashes to

remind to replace

batteries

Battery Life

1000 hours

Dimensions/Weight

Instrument: 40*31*178mm/107g; Carrying case:

190*165*140mm/438g

9. Warranty

We warrant this instrument to be free from defects in material and workmanship

and agrees to repair or replace free of charge, at option of OAKTON INSTRUMENTS,

any malfunctioned or damaged product attributable to responsibility of OAKTON

INSTRUMENTS, for a period of two years from the delivery (a six-month limited

warranty applies to probes). This warranty does not apply to defects resulting from

actions such as misuse (violation of the instructions in this manual or operations in

the manner not specified in this manual), improper maintenance, and unauthorized

repairs. Warranty period is the time limit to provide free service for the products

purchased by customers, not the service life of the tester or probe.

Oakton Instruments reserves the right to update the information in this manual without giving notice in

advance.

OAKTON INSTRUMENTS

PO Box 5136

Vernon Hills, IL. 60061

Tel: 888-462-5866

www.4Oakton.com

Tabla de contenidos

Otros manuales de Equipo de prueba de Oakton

Oakton

Oakton ORPTestr10 Manual de usuario

Oakton

Oakton WD-35634-06 Manual de usuario

Oakton

Oakton pHTestr 30 Manual de usuario

Oakton

Oakton ORP5 Manual de usuario

Oakton

Oakton pHTestr 1 Manual de usuario

Oakton

Oakton ORPTestr 50 Manual de usuario

Oakton

Oakton CTS5 Manual de usuario

Oakton

Oakton CTSTestr 5 Manual de usuario

Oakton

Oakton TempTestr 35628-00 Manual de usuario

Oakton

Oakton pHTestr 1 Manual técnico

Oakton

Oakton WD-35662-35 Manual de usuario

Oakton

Oakton pHTestr 30 Manual de usuario

Oakton

Oakton EcoTestr pH 2 Manual de usuario

Oakton

Oakton Eutech Instruments TDSTestr11+ Manual de usuario

Oakton

Oakton ORPTestr 30 Manual de usuario

Oakton

Oakton pHTestr 20 Manual de usuario

Oakton

Oakton EC1 Manual de usuario

Oakton

Oakton pH BNC 10 Manual de usuario

Oakton

Oakton pHTestr 30 Manual de usuario

Oakton

Oakton pH 5+ Manual de usuario

Oakton

Oakton PCTS5 Manual de usuario

Oakton

Oakton PCTSTestr 50 Manual de usuario

Oakton

Oakton CTSTestr 50 Manual de usuario

Oakton

Oakton TDS 1 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario